• Journal of Korean Society of Steel Construction
• /
• v.12 no.6
• /
• pp.715-725
• /
• 2000

As a link composition of a double link type level luffing jib crane was determinated through the link composition design, the design to be considered will be computations of the luffing trajectory deviation at the fly jib tip and the required luffing device capacity. This paper is a study regarding the static and dynamic analysis for a mechanism of the crane. The objective of the static analysis is to determinate the capacity and the dimension of luffing device when the crane selfload, rated hoisting load, wind load and inertia force are applied on the crane. The objective of dynamic analysis is to compute the luffing trajectory deviation, velocity and inertia force due to luffing acceleration for each link. All analyses are performed by computer programs. The reliability of the program was checked by results from analyses of the related commercial package. It is expected that the productivity and reliability of the design can be improved by this program which can rapidly and exactly deal with static and dynamic analysis for a given link composition of the crane.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.739-746
• /
• 2006

The bus probe-based link travel times were more readily available due to bus' fixed route schedule and it was different from that of taxi-based one in its value for the same link. At the same time, the bus-based one showed less accurate information than the taxi-based link travel time, in terms of reliability expressed by 1-RMSE(%) measure. The purpose of this thesis is to develop a heuristic algorithm for mixing both sources-based link travel times. The algorithm used both real-time and historical profile travel times. Real-time source used 4 consecutive periods' average and historical source used average value of link travel time for various congestion levels. The algorithm was evaluated for Seoul urban arterial network 3 corridors and 20 links. The results based on the developed algorithm were superior than the mere fusion based link travel times and the reliability amounted up to 71.45%. Some limitation and future research agenda have also been discussed.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.58-64
• /
• 1998

An analysis method for the reliability of ceramic structures subjected to thermal shocks is presented. Flaws with the size of given probability distribution function are assumed to be distributed at random with a certain density per unit volume in the structures. Criterions for crack instability are derived for brittle solids under general thermal stresses. A probabilistic failure model is presented to study the probability of crack instability for brittle solids containing cracks with uncertain size. The reliabilities of brittle structures are evaluated based on the weakest-link hypothesis, which states that a structure fails when the cracks in any differential volume become unstable. A numerical example is given to demonstrate the application of the proposed method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.954-958
• /
• 1996

An analysis method for the reliability of ceramic structures subjected to thermal shocks is presented, Flaws with the size of given probability distribution function are assumed to be distributed at random with a certain density per unit volume in the structures. Criterions for crack instability are derived for brittle solids under general thermal stresses. A probabilistic failure model is presented to study the probability of crack instability for blittle solids containing cracks with uncertain crack size. The reliabilities of brittle structures are evaluated based on the weakest-link hypothesis, which states that a structure fails when the cracks in any differential volume become unstable. A numerical example is given to demonstrate the application of the proposed method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.107-114
• /
• 2007

This paper describes the Petri Net(PN) model for reliability analysis of fault-tolerant dual Ethernet which Is applied in Naval Combat System. The network for Naval Combat System performs failure detection and auto path recovery by handling redundant path in case of temporary link failure. After studying the behavior of this kind of network, the reliability analysis model is proposed using stochastic Petri Net and continuous-time Markov chains. Finally, the numerical result is analyzed according to changing the failure rate and the recover rate of link.

• Journal of Internet Computing and Services
• /
• v.7 no.6
• /
• pp.175-183
• /
• 2006

An ad-hoc network is a group of mobile nodes acting as routers. The of hoc node has a precondition of mobility, allowing path to be easily disconnected when transmitting data, thereby increasing network overhead. However, most of hoc routing protocols set up the path based only on the number of hops without considering other practical factors. Here we consider a path with the least substantial number of transmission (SNT) from source to destination based on reliabilities of links. This includes retransmissions due to unreliable links. In this paper, an efficient ad-hoc link reliability based routing (PU) protocol suitable for mobile ah-hoc network in terms of SNT, is proposed. The network overhead and data transmission delay ore reduced, by considering both ad-hoc link reliability and the number of hops. Our empirical performance evaluation comparing to AODV (8) shows that the enhancement is up to about 31% for SNT depending upon the mobility of nodes.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.146-154
• /
• 2005

Recently, the high-speed and intelligence technology of machine tools are developed for the high efficiency of productivity Under the operating condition from the high-speed of machine tools, the various failure modes can occur in core units of manufacturing system. Therefore it is for the reliability concept of machine tool to be required in a design level. And the above-stated technology must be accommodated in the feeding and spindle subsystem, etc those are the core units of machine tools. In this study, we are developed the test-bed of sliding cover (C-plate) in order to evaluating reliability and estimating failure modes of feeding subsystem under operating conditions. The reliability experiment using the developed test-bed and the additional structural analysis executed on single and double structure. We found out the weak parts of sliding cover and were able to predict a life cycle from the experiment results. In this study, we propose the new C-plate model with double link structure to apply the high-speed machine tool in the fundamental guideline.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.534-544
• /
• 2009

Finding link-disjoint or node-disjoint paths under multiple constraints is an effective way to improve network QoS ability, reliability, and so on. However, existing algorithms for such scheme cannot ensure a feasible solution for arbitrary networks. We propose design principles of an algorithm to fill this gap, which we arrive at by analyzing the properties of optimal solutions for the multi-constrained link-disjoint path pair problem. Based on this, we propose the link-disjoint optimal multi-constrained paths algorithm (LIDOMPA), to find the shortest link-disjoint path pair for any network. Three concepts, namely, the candidate optimal solution, the contractive constraint vector, and structure-aware non-dominance, are introduced to reduce its search space without loss of exactness. Extensive simulations show that LIDOMPA outperforms existing schemes and achieves acceptable complexity. Moreover, LIDOMPA is extended to the node-disjoint optimal multi-constrained paths algorithm (NODOMPA) for the multi-constrained node-disjoint path pair problem.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.614-617
• /
• 1995

The unbalance heavy-load elevation driving systems are composed of rotating link-mechanism and hydraulic cylinder which actuates elevation and compensates the static unbalance moment of supporting mechanism. Control and compensation of gun driving is very difficult because these mechanism imply highly nonlinearities due to hydraulic fluid characteristics and mechanical rotation of link-mechanism. In this study, through the analysis of manufactured link-mechanism, the optimal link-mechanism design of the elevating system is suggested. Also to estimate the control performance of the unbalance heavy-load elevation servo-control driving system, modeling and simulation of the system are carried out. To prove the reliability of performance estimation program,simulation results are compared with the experimental results. Both results are similar, therefore this program will be helpful to study the control performance improvement of the system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.571-573
• /
• 2018

Wireless sensor networks have unbalanced energy consumption due to the convergence structure in which data is concentrated to sink nodes. To solve this problem, in the previous research, the relay node was placed between the source node and the sink node to merge the data before being concentrated to the sink node. However, selecting a relay node that does not consider the link quality causes packet loss according to the link quality of the reconfigured routing path. Therefore, in this paper, we propose a link cost calculation method for data reliability in routing path reconfiguration for relay node selection. We propose a link cost estimation formula considering the number of hops and RSSI as the routing metric value and select the RSSI threshold value through the packet transmission experiment between the sensor modules.