• The Journal of the Korean dental association
• /
• v.48 no.5
• /
• pp.391-406
• /
• 2010

Orthodontic treatment for middle-aged patients has become more commonplace with various reasons including improved socioeconomic status. Understanding of oral status and treatment modalities of middle-aged patients is mandatory for accurate diagnosis and proper treatment planning. This study investigated 100 consecutive patients aged 40s and 50s and 100 aged 20s who had been examined and diagnosed at the Department of Orthodontics, Chonnam National University Dental Hospital. The results were obtained as follows; 1. Gender distribution showed female outnumbered male patients in young-aged adult patients, but middle-aged patients showed similar male and female distribution. 2. The major concern seeking orthodontic treatment was esthetics not only in young-aged but also in middle-aged adult patients, and a number of middle-aged patients were concerned about oral health as well. 3. Considerable number of middle-aged patients were referred by other dental specialties while young-aged adult patients were more self-motivated for orthodontic treatment. 4. Middle-aged adult patients had more missing teeth and periodontal disease than young-aged adults. 5. The most frequently-observed problem was dental spacing in middle-aged patients while dental crowding in young-aged adult patients. Middle-aged patients showed higher prevalence of deep overbite and overjet while most of young-aged adults presented opposite direction of problem in overbite and overjet. 6. Limited orthodontic treatment was required rather than comprehensive treatment in middle-aged patients, and the most common tooth moving area was anterior part of dentition in case of limited treatment. Need of interdisciplinary therapy with other dental specialties was more common in middle-aged patients. 7. Intervention of specific technique such as invisible TP, passive bracketing, passive wire bonding, and lingual orthodontics was more required in middle-aged patients. Considering that middle-aged patients have different characteristics than young-aged adults, the results of the present study suggest that different treatment modalities are required in middle-aged orthodontic patients in order to manage them properly and efficiently.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.497-505
• /
• 2004

The purpose of this study was to evaluate the post-retention stability of the lower incisor axis in Class II division 2 malocclusions. The dental casts and lateral cephalograms from before (T1) and after (T2) orthodontic treatment and long-term post-retention (T3) in 62 Class II division 2 malocclusion cases were included in this study. After several linear and angular measurements at each time were taken, the significance in the amount of change of the lower incisor axis for each gender and extraction versus non-extraction was evaluated. The results showed that the lower incisors that inclined labially during treatment were unstable and relapsed to the original lingual position in Class II division 2 malocclusions (p<0.001). There was no significant difference between extraction and non-extraction groups for the amount of lingual relapse of the lower incisors (p>0.05). There was no significant difference between male and female groups for the axial change of the lower incisors (p>0.05). As a result of multiple regression analysis, the cephalometric measurement best predicting the lower incisor position to the A-Pog line post-retention was pre-treatment L1-Apog(mm) and pre-treatment SNGoMe$(^{\circ})$. Because of the instability of labially inclined lower incisors after orthodontic treatment, the treatment goal should be the pre-treatment incisor axial position.

• The korean journal of orthodontics
• /
• v.24 no.2
• /
• pp.275-294
• /
• 1994

The occlusal interference during adolescent period makes some effects on growth and development and morphological changes. And so, if we could predict the the timing and results of orthodontic treatment who have occlusal interference during adolescent period, it may be helpful for diagnosis and treatment planning of orthodontic treatment. For about those, the purpose of this study was to evaluate the effects of the posterolateral displacement by the metal casting crown with inclined pathway on the mandibular condyle and morphologic changes of mandible in the rat. The experimental animals were thirty six Sprague-Dawley male rats of 8 weeks old. Eight of them was used as control group, and experimental group 1 ( continuous appliance wearing group ) was composed of sixteen and experimental group 2 ( appliance removal group after worn the appliances during 3 months ) was composed of remaining twelve. The animals of experimental grouop 1 were sacrificed after 1, 2, 3, 6 months from beginning of the experiment and experimental group 2 were sacrificed 1, 2, 3 months after removal of the appliance from worn the appliance during 3 months. Both of mandible and temporomandibular joint were observed histologically and radiologically. The results were as follows : 1. In experimental group 1, the mandibular length and lower posterior height were decreased with experimental period, while the lower anterior height was increased, and the curvature of lower incisors and lingual inclination of anterior alveolar bone were profound as compared with control group. 2. In experimental group 1, both of the thickness of the condylar cartilage were thinned in the posterosuperior region, and this phenomenon was more prominent on right than left in 3-Mo experimental period and both sides were marked thinned in 6-Mo experimental period. 3. In experimental group 2, the lower anterior height was low and lower posterior height was high as compared with experimental group 1, and the curvature of lower incisors and lingual inclination of anterior alveolar bone were recovered to control group. 4. In experimental group 2, both of the thickness of the condylar cartilage were thickened in the posterosuperior region, and this phenomenon was more prominent with experimental period. 5. In experimental group 2, the mandibular length was short, lower anterior height was hight, the curvature of lower incisors were profound, and in histologically, both of the thickness of the condylar cartilage were thickened in the posterosuperior region as compared with control group. As shown above, the occlusal interfemce affected the condylar cartilage, curvature of lower incisor, inclination of anterior alveolar bone, mandibular length, and anterior and posterior height. When the interference was removed, significant recover was found in condylar cartilage, mandibular length, and posterior height. Although no significance was found, other items of measurement showed trends for recovery.

• The korean journal of orthodontics
• /
• v.49 no.6
• /
• pp.372-380
• /
• 2019

Objective: To determine the effects of a local injection of leukocyte-platelet-rich plasma (L-PRP) on orthodontic tooth movement in rabbits. Methods: Twenty-three male New Zealand white rabbits were included in a split-mouth design. Tooth movement with a 100-g nickel-titanium closed-coil spring was performed on the maxillary first premolars. L-PRP was injected submucosally at the buccal and lingual areas of the first premolar in one random side of the maxilla and the other side served as the control and received normal saline. The amount of tooth movement was assessed on three-dimensional digital models on days 0, 3, 7, 14, 21, and 28. Histological findings and osteoclast numbers were examined on day 0 as the baseline and on days 7, 14, and 28. Results: The L-PRP group showed significantly greater cumulative tooth movement at all observed periods. However, a significantly higher rate of tooth movement was observed only on days 0-7 and 7-14. The osteoclast numbers were significantly increased in the L-PRP group on days 7 and 14. Conclusions: Local injection of L-PRP resulted in a transient increase in the rate of tooth movement and higher osteoclast numbers.

• The korean journal of orthodontics
• /
• v.34 no.4 s.105
• /
• pp.303-312
• /
• 2004

An unfavorable tipping movement can occur during the retraction of anterior teeth because orthodontic force is loaded by brackets positioned far from the center of resistance. To avoid this unfavorable movement, a compensating curved wire or lingual root torque wire is used. The purpose of this study is to investigate, using photoelastic material, the distribution of initial stress associated with the retraction of the incisors according to the degree of the compensating curve, to model changes associated with tooth ud alveolar bone structure. The following results were obtained by analysis of the polarizing plate of the effects of initial stress resulting from retraction of the anterior teeth: 1. When the incisors were retracted using combination archwire or sliding mechanics, the maximal polarizing pattern of the apical area decreased as the degree of the compensating owe increased from 0 to 15 to 30. 2. When the incisors were retracted by the combination archwire or sliding mechanics, the maximal polarizing pattern of the canine and premolar area increased as the degree of the compensating curve increased from 0to 15to 30. 3. A lower degree of polarizing patterns were associated with the combination archwire technique than the sliding mechanics technique at a given force. The above results indicate that there is no significant difference between the combination loop archwire technique and sliding mechanics, for the retraction of maxillary anterior teeth with decreased lingual tipping tendency by a compensating curve on the arch wire. However, the use of sliding mechanics is more effective for the prevention of lingual inclination of the anterior teeth, because the hook used in sliding mechanics is closer to the center of resistance of the maxillary anterior teeth.

• The korean journal of orthodontics
• /
• v.24 no.1 s.44
• /
• pp.95-104
• /
• 1994

There are orthodontic closure, surgincal closure, prosthetic solution in the treatment of diastema. The orthodontic closure has been widely used owing to its conservative nature, but retention after treatment has been difficult and problematic. So, authors observed relapse and retention after the orthodontic closure of 3 diastema cases. The results might be summarized as follows : The space that had been approximated between central incisors, was reopened by the use of retention appliance which did not join two central incisors together though fixed prothesis. By the frenectomy, circumferential supracrestal fibrotomy and lingual bonded retainer which joined two central incisors together after the orthodontic closure of diastema, were good results obtained. The frenectomy, fibrotomy, and the fixed retention appliance which joined two central incisors together must be needed after the orthodontic closure of diastema.

• The korean journal of orthodontics
• /
• v.19 no.2
• /
• pp.130-143
• /
• 1989

The purpose of this study was to assess the early effect of FR III on the growing patients with anterior cross-bite. The lateral cephalograms and models were obtained from 7 patients at the time of pretreatment and correction of anterior cross-bite. The results were as follows: 1. A slight tendency of rotation toward anterosuperior direction and the growth to anterior direction were shown in maxilla. 2. There were a little change of mandibular vertical position and increase in lower facial height although some variations existed. 3. The bodily or labial tipping movement was shown in maxillary incisors. 4. The lingual tipping of mandibular incisors was shown in all cases. 5. Maxillary arch width increased while mandibular arch width usually changed a little although some variations existed. But it was difficult to summary in a word because variable responses were noted according to a wide variety of skeletal type, growth, and malocclusion.

• The korean journal of orthodontics
• /
• v.41 no.4
• /
• pp.224-236
• /
• 2011

Objective: The purpose of this study was to analyze the dental and basal arch forms in patients with normal occlusion using the computed tomography (CT) imaging method. Methods: CT images were taken from 27 normal occlusion subjects (male, 15; female, 12) and these images were reconstructed into three-dimensional models. A 3D-coordinate system was formed by setting the middle of the facial axis (FA) point of the maxillary central incisors as the origin. The morphology of the maxilla and mandibular dental and basal arches were analyzed by sectioning parallel to the maxillary occlusal plane. Results: There was no significant difference between A point and B point and between the maxillary 1st molars in both sides of the maxillary and mandibular basal bone. The dental arch was located more labially than the basal arch in the anterior portion. The bucco-lingual crossover of the dental arch and basal arch was formed at the molar region in the maxilla, and at the premolar region in the mandible. Conclusions: This study will help provide three-dimensional diagnostic information about the relationship between basal and dental arches in patients who have severe dental compensation and inappropriate jaw relationships.

• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.89-107
• /
• 1992

The purpose of this study was to investigate the difference between normal and malocclusion subjects in Temporomandibular joint. This study was based on the 44 subjects with normal occlusion, 30 subjects with Class II malocclusion, 30 subjects with Class III malocclusion before treatment. After submental vertex view analysis, each subject was given the TMJ Tomogram in centric relation and centric occlusion and the Cephalogram was taken with Quint Sectograph. The TMJ spaces were measured and analyzed statistically. Following results were obtained. 1. When centric relation was compared to centric occlusion, The condyles were positioned more posteriorly and superiorly in centric relation position of the normal occlusion group and the class II malocclusion group. In the Class III malocclusion group. There was no significant difference in the condylar position between centric occlusion and centric relation. 2. The condyles of the Class III malocclusion group were positioned more superiorly than the normal occlusion group and the Class II malocclusion group. 3. In the correlation between articular eminence posterior slope angle and lingual slope angle of the upper anterior central incisor, there was significant correlation in the normal occlusion group. But no significant correlation was found in the malocclusion group. 4. The mean value of the horizontal angulation of condylar head to the transear rod axis plane was $20.32^{\circ}{\pm}8.12^{\circ}$ in the normal occlusion group, $25.08^{\circ}{\pm}4.83^{\circ}$ in the class II malocclusion group, $14.68^{\circ}{\pm}4.08^{\circ}$ in the class III malocclusion group.

• The korean journal of orthodontics
• /
• v.53 no.4
• /
• pp.254-263
• /
• 2023

Objective: The evidence on the accuracy of bite registration using intraoral scanners is sparse. This study aimed to develop a new method for evaluating bite registration accuracy using intraoral scanners. Methods: Two different types of models were used; 10 stone models and 10 with acrylic resin teeth. A triangular frame with cylindrical posts at each apex (one anterior and two posteriors) was digitally designed and manufactured using three-dimensional (3D) printing. Such a structure was fitted in the lingual space of each maxillary and mandibular model so that, in occlusion, the posts would contact their opposing counterparts, enforcing a small interocclusal gap between the two arches. This ensured no tooth interference and full contact between opposing posts. Bite registration accuracy was evaluated by measuring the distance between opposing posts, with small values indicating high-accuracy. Three intraoral scanners were used: Medit i500, Primescan, and Trios 4. Viewbox software was used to measure the distance between opposing posts and compute roll and pitch. Results: The average maximum error in interocclusal registration exceeded 50 ㎛. Roll and pitch orientation errors ranged above 0.1 degrees, implying an additional interocclusal error of around 40 ㎛ or more. The models with acrylic teeth exhibited higher errors. Conclusions: A method that avoids the need for reference hardware and the imprecision of locating reference points on tooth surfaces, and offers simplicity in the assessment of bite registration with an intraoral scanner, was developed. These results suggest that intraoral scanners may exhibit clinically significant errors in reproducing the interocclusal relationships.