• Journal of Plant Biotechnology
• /
• 제29권4호
• /
• pp.247-252
• /
• 2002

1.5% NaCl이 함유된 배지에 캘러스를 치상하여 방사선을 처리한 결과 무처리구보다 처리구 (30, 50 Gy)에서 캘러스 생존율 및 재분화율이 증가하여 내염성 캘러스를 선발하는데 방사선의 적용이 효과적임을 알 수 있었고, 내염성 캘러스에서 재분화된 M$_3$세대 종자에서 내염성 계통들은 모품종보다 초장, 근장 및 근수의 생육이 우수하여 이러한 계통은 내염성 연구를 위한 유용한 유전자원으로 이용할 수 있을 것으로 생각된다. 또한 RAPD 기술은 대조구와 내염성 캘러스에서 재분화된 계통을 구분하는데 유용한 기술임을 알 수 있었다.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.118-123
• /
• 2004

We investigated quench distribution in AU/YBCO thin film meander lines with a heater. Quench distribution during faults is important for superconducting fault current limter applications, because uniform quench allows application of higher voltages across the meander lines. AU/YBCO thin films grown on sapphire substrates were patterned into meander lines by photolithography. Gold films grown on the rear sides of the substrates were also patterned into meander lines, and used as heaters. Meander lines on the front and the rear sides were connected in parallel. The meander lines were subjected to simulated AC fault currents for quench measurements during faults. They were immersed in liquid nitrogen during the experiment for effective cooling. Resistance of the AU/YBCO meander lines initially increased more rapidly with the rear heater than without, and consequently the fault current was limited more. The resistance subsequently became similar, The resistance distribution was more uniform with the heater, especially during the initial quench. Quench was completed more uniformly and significantly earlier. This resulted in uniform distribution of dissipated power. These results could be explained with the concept of quench propagation, which was accelerated by heat transfer across the substrate from the rear heater.

• 소성∙가공
• /
• 제22권6호
• /
• pp.323-327
• /
• 2013

In this paper, the flow lines as a function of product design as well as the forging process design are explored using typical application examples. The prediction of flow lines using metal forming simulation technology is introduced along with their characterization. Experimental studies have shown that the metal flow lines have a strong influence on the structural rigidity of the final product. In this study we present several typical applications. One example is the case of severely cut metal flow lines during machining, especially in the region where periodic contacting forces are applied. Another example is the case of abnormal distortion of flow lines which can cause too much elongation or hot shortness due to viscous heating in the region of distortion. A third example is the case of a macrosegregation region which needs to be controlled so it is not adjacent to the region where the force is applied in the use of the final component. An example of weight reduction for an automobile component with improved flow lines is also introduced. These typical applications can provide process engineers with the insight in designing automobile or mechanical components as well as in designing the manufacturing methods to produce various parts.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.57-65
• /
• 2016

In this paper, based on the mode analysis of four-conductor lines, the extended mixed-mode chain-parameters and S-parameters of four-conductor lines are estimated using current division factors. The extended mixed-mode chain-parameters of cascaded four-conductor lines are then obtained with mode conversion. And, the extended mixed-mode S-parameters of cascaded four-conductor lines can be predicted from the transformation of the extended chain-parameters. Compared to the extended mixed-mode S-parameters of four-conductor lines, the cross-mode S-parameters are induced in the extended mixed-mode S-parameters of cascaded four-conductor lines, due to the imbalanced current division factors of cascaded two sections. The generated cross-mode S-parameters make the equivalent different- and common-mode conductors not independent from each other again. In addition, a new mode conversion, which applies the imbalanced current division factors, between the extended mixed-mode S-parameters and standard S-parameters is also proposed in this paper. Finally, the validity of the proposed extended mixed-mode S-parameters and mode conversion is confirmed by a comparison of the simulated and estimated results of shielded cable.

• 한국압력기기공학회 논문집
• /
• 제6권2호
• /
• pp.54-60
• /
• 2010

Piping failures due to thermal fatigue have been widely reported in normally stagnant non-isolable reactor coolant branch lines. Since the thermal fatigue due to thermal stratification was not considered in the piping fatigue design in old NPPs, it is important to evaluate the effect of thermal stratification on the integrity of branch lines. In this study, geometrical screening criteria for Up-horizontal branch lines in MRP-132 were applied to SI(Safety Injection) lines of KSNP 2-loop and WH 3-loop. Some computational fluid dynamic(CFD) analyses on the Reactor Coolant System(RCS) branch lines were also performed to develop the regulatory guidelines for screening criteria. As a result of applying MRP-132 screening criteria, KSNP 2-loop and WH 3-loop SI lines are determined to need further detailed evaluation. Results of CFD analyses show that both valve isolation and amount of leakage through valve can be used as technical bases for the screening criteria on the thermal fatigue analysis.

• Structural Engineering and Mechanics
• /
• 제54권4호
• /
• pp.793-807
• /
• 2015

Constructing the influence lines of forces of statically indeterminate structures is a traditional issue in structural engineering and mechanics. However, the existing kinematic method for establishing these force influence lines is an indirect or mixed approach by combining the force method with the theorem of reciprocal displacements, which is yet inconsistent with the kinematic method for statically determinate structure. This paper proposes the direct kinematic method in conjunction with the load-displacement differential relation for exactly constructing influence lines of reaction and internal forces of indeterminate structures. Firstly, through applying the principle of virtual displacement, the formula for influence lines of reaction and internal forces of indeterminate structure via direct kinematic method is derived based on the released structure. Then, a computational approach with a clear concept and unified procedure as well as wide applicability based on the load-displacement differential relation of beam is suggested to achieve conveniently the closed-form expression of force influence lines, and exactly draw them. Finally, three representative examples for constructing force influence lines of statically indeterminate beams and frame illustrate the superiority of the proposed method.

• 한국멀티미디어학회논문지
• /
• 제25권7호
• /
• pp.912-921
• /
• 2022

Autonomous vehicles equipped with cameras, such as robots, fork lifts, or cars, can be found frequently in industry sites or usual life. Those cameras show planar motion because the vehicles usually move on a plane. Sometimes the cameras in fork lifts moves vertically. The cameras under planar and vertical motion provides useful properties for horizontal or vertical lines that can be found easily and frequently in our daily life. In this paper, some useful back-projection properties are suggested, which can be applied to horizontal or vertical line images captured by a camera under planar and vertical motion. The line images are back-projected onto a virtual plane that is parallel to the planar motion plane and has the same orientation at the camera coordinate system regardless of camera motion. The back-projected lines on the virtual plane provide useful information for the world lines corresponding to the back-projected lines, such as line direction, angle between two horizontal lines, length ratio of two horizontal lines, and vertical line direction. Through experiments with simple plane polygons, we found that the back-projection properties were useful for estimating correctly the direction and the angle for horizontal and vertical lines.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.258-258
• /
• 2017

We received 73 wheat resources from CIMMYT for analysis of agricultural characteristics and qualities of them. We sowed 73 lines and 4 Korean varieties in fall and spring to compare differences of wheat traits between fall and spring seeding. The heading and maturity date of fall seeding lines has coming faster average 18 days than spring seeding lines. Fall seeding lines have more number of spike per $m^2$ and grain number of spike. Spike and awn length of spring seeding lines were shorter than fall seeding lines and stem length was variable to varieties in both condition. Protein contents of five of 73 lines, Jokyoung and Jopoom varieties decreased but the others increased. The sedimentation values of 34 lines include Jokyoung and falling number (F/N) of 44 lines include two varieties, Keumkang and Jokyoung, decreased but the others increased, respectively. Particle size was presented that most spring seeding lines were bigger. However, when it sowed in fall, the lightness (L) of wheat flour was lighter. Consequently, we confirmed when it was sowed in spring, agricultural traits and qualities of wheat got weak.

• Interdisciplinary Bio Central
• /
• 제2권4호
• /
• pp.14.1-14.9
• /
• 2010

Misidentification of cultured cell lines results in the generation of erroneous scientific data. Hence, it is very important to identify and eliminate cell lines with a different origin from that being claimed. Various methods, such as karyotyping and isozyme analysis, can be used to detect inter-species misidentification. However, these methods have proved of little value for identifying intra-species misidentification, and it will only be through the development and application of molecular biological approaches that this will become practical. Recently, the profiling of microsatellite variants has been validated as a means of detecting gene polymorphisms and has proved to be a simple and reliable method for identifying individual cell lines. Currently, the human cell lines provided by cell banks around the world are routinely authenticated by microsatellite polymorphism profiling. Unfortunately, this practice has not been widely adopted for mouse cells lines. Here we show that the profiling of microsatellite variants can be also applied to distinguish the commonly used mouse inbred strains and to determine the strain of origin of cultured cell lines. We found that approximately 4.2% of mouse cell lines have been misidentified; this is a similar rate of misidentification as detected in human cell lines. Although this approach cannot detect intra-strain misidentification, the profiling of microsatellite variants should be routinely carried out for all mouse cell lines to eliminate inter-strain misidentification.

• 한국정보통신학회논문지
• /
• 제10권3호
• /
• pp.556-563
• /
• 2006

문서 영상에서 표 영역을 분류하고 구조를 파악하려면 표를 구성하는 직선과 데이터를 추출할 수 있어야 한다. 그러나 영상 입력 장치의 오차나 영상축소로 인해 표를 구성하는 직선이 끊어지거나 길이가 변하며 직선에 노이즈나 문자가 붙어 표로부터 직선과 데이터의 정확한 추출이 어렵다. 본 논문에서 는 1차원 메디안 필터를 이용하여 표를 구성하는 수평선과 수직선을 추출한다. 1차원 메디안 필터는 필터링 방향의 직선을 추출하는 과정에서 노이즈와 필터링 방향에 수직한 직선을 제거할 뿐 아니라 직선의 끊어진 부분이 필터 탭 길이보다 짧은 경우 끊어진 부분을 연결한다. 또한 수직선을 추출하는 과정에서 직선에 붙어 있던 문자들을 분리함으로써 상용제품을 포함한 기존의 방법에 비해 표 영역 분류 및 구조 분석을 위한 직선과 데이터 추출이 우수한 방법을 제안한다.