• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.19
• /
• pp.96-118
• /
• 2003

Government tries to revise the article 25 in Korea Maritime Transport Act which describes subject of coastal carriage for exported-imported container cargoes. The subject of coastal carriage will be replaced coastal carrier by ocean liner carrier according to the revised article 25. By adopting the revised article, coastal shipping industry will be deteriorated in terms of returns on investment, sales and etc. Even though the revision is inevitable to harmonize the flow of exported-imported container cargo movement, coastal shipping industry should be developed and restructured to get competitive power and to set up an efficient international logistics system. To enhance competitive power of coastal shipping companies successfully, government must realize the importance of coastal shipping, and aid the industry through various methods such as arrangement of law and regulation, indirected financial assistance, decrease of tax rate, etc.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.05a
• /
• pp.70-73
• /
• 1997

Recycling of$\boxUl$ useful industrial waste is highly recommended by the government. Some geotechnical properties such as specific gravity, dry density, unconfined compressive strength, pH. compressibility, permeability were determined to evaluate the feasibility of waste lime use in the landfill as an admixture clay liner. Various types of environmental tests on waste lime were conducted to compare the results with the EPA requirements. Laboratory test results indicate that admixture soil(waste lime/decomposed granite soil) is a promising material its an admixture clay liner in the sanitary landfill.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.642-647
• /
• 2010

Film cooling is used to protect thermally the inner wall of combustion chamber exposed to hot gas in air-breathing propulsion system and specially film cooling using slotted cooling liner has been investigated to improve the cooling characteristics for a long time. In this paper results from gas dynamic and heat transfer calculations were presented in the combustion area and cooling area of multi-slotted cooling liner.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.3
• /
• pp.224-229
• /
• 2012

The importance of ventilation system is being emphasized by interest of indoor air quality. Especially, heat recovery ventilation system has attracted attention as most effective ventilation plan. Because it can reduce hazardous construction materials, indoor air pollutions, and also can reduce air conditioning energy cost. In heat recovery ventilator, the element core is the most important part. The element core is composed of liner and spacer. And liner and spacer are stacked alternately. On the Liner, heat and humidity transfer are made between supply and exhaust air. And spacer plays a role as a tunnel of exhaust and supply. In this study, we investigated and analyzed the efficiency of a heat recovery ventilator, when the spacer's properties are changed. As a result, difference spacer's properties affect an efficiency of heat recovery ventilator.

• Journal of the Korean GEO-environmental Society
• /
• v.1 no.1
• /
• pp.65-70
• /
• 2000

Recently, soil-bentonite mixtures are frequently used as impervious liners for waste disposal sites. In the present work, bentonite composite liner systems have been developed by utilizing Korean zeolitic bentonites. The geomechanical properties of the liner systems, such as strength hydraulic conductivity, etc. have also been studied. The laboratory and field test results showed that uniaxial strengths of the system were improved by addition of bentonite and CaO-based additive to the upper and lower layer of the liner systems, respectively. Hydraulic conductivity values measured on field liner systems showed less $1{\times}10^{-3}cm/s$, which is considered to be minimum regulation requirement for waste disposal sites.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.183-186
• /
• 1999

Up to date, it is difficult to estimate the consistence of properties on the epoxy liner in service time because an estimation of the long term environment-deterioration with aging has not been processed. In the study, the estimation on epoxy liner is carried by the physical test 7 rounds. There are the elongation the and the crack bridging test in the part of physical tests. An elongation test is carried out with epoxy membrane and a crack bridging test is carried out with specimen painted epoxy on concrete. The subjects of test and estimation are a containment quality system and a fibre-glass reinforced system. The materials of these systems are a Robber added Epoxy, a Silica added Epoxy, and a Fiber reinforced Epoxy. Ensuring the test data, properties of epoxy liner was estimated and the change of properties was predicted on epoxy liners.

• Journal of Korea Foundry Society
• /
• v.28 no.1
• /
• pp.25-30
• /
• 2008

To develop a functionally graded microstructure of cylindrical liner, effect of centrifugal casting parameters such as pouring temperature of hyper-eutectic Al-Si alloy melt, mold pre-heating temperature, and rotational frequency of mold on distribution of primary Si particles across wall thickness were investigated. Segregation tendency of Si particles toward inner side of cylindrical liner increased as the increase of rotational frequency of mold, pouring temperature of melt and mold pre-heating temperature. Especially, distribution density of primary Si particles within 1.5 mm from inner surface of cylindrical liner was above 35% under the centrifugal casting condition of $750^{\circ}C$ melt pouring temperature, $300^{\circ}C$ mold pre-heating temperature, and 2500 rpm mold rotational frequency.

• Journal of Korea Port Economic Association
• /
• v.17 no.2
• /
• pp.139-166
• /
• 2001

Globalization and regionalization are major trends in the international economic system. The severe competition among countries has signalled the need for a new international trade system as prescribed by the WTO, which regulates international trade practices. Additionally, expanding the activities and role of the Pan-Yellow Sea area in the world has a very important function in terms of regional cooperation and logistics environment. In this paper, the trading conditions and shipping transport problems of the Pan-Yellow Sea area (North-East Asia) were investigated. Shipping transport conditions in the Pan-Yellow Sea area, particularly Korea-China routes, were surveyed as well. A new Incheon-China container liner route was suggested as a partial remedy to some of the shipping transport problems of the Pan-Yellow Sea Area (North-East Asia). The Incheon-China Container Liner route is more efficient than Pusan and Pyungtaek Ports or the car ferry route to China in terms of transport time and expense. The transport burden indicator which includes the time and expense of transport, can be a useful tool in comparing these routes. Accordign to the transport burden indicator, the Incheon-China Container Liner route is more efficient than the Pusan, Pyungtaek, or car ferry routes. To establish a successful liner route between the ports of Inchon and China, there is a need to prepare three measures that contain short-term medium-term and long-term strategies. Furthermore, these measures should be prepared and adopted in phases, in accordance with considerations of future conditions for shipping and logistics in the Pan-Yellow Sea area.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.05a
• /
• pp.47-52
• /
• 1997

The experimental investigations considered in this paper are similar in many respects to those of Lee$^1$, with some key differences. First, there is no layering of the soils in a heterogeneous liner. The only soil investigated is the clay component of the cover liner. This ensures that the clay is exposed to freezing and that frost propagation in the clay can be investigated separate from other processes. Second, a closed system approach to the simulation was adopted. According to Jones$^2$, closed-system freezing occurs when there is no source of water available beyond that originally present in the soil voids. Freezing under such conditions results in very thin or non-existent ice lenses. One of tile objectives of the experiments described in this paper was the moisture migration and the changing of moisture contents of the compacted clay liner in landfill. The closed-system was used to limit tile variables in the experimental simulation to make these calculations more direct, although the final results could be applied to an open system also. As a result, the moisture content decreased about 45%-46% after two freeze/thaw cycles.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.1
• /
• pp.39-46
• /
• 2010

Recently, the effective use of closed waste landfill nearby urban areas has been demanded, because of the lack of the usable land. However, the reuse of closed landfill is needed an adequate stabilization of liner system. But most of these places are consisted of steep slope and hence it is necessary to use the geosynthetics liners in there. Liner system of waste landfills is an important facility which prevents leachate outgoing from the landfills and also groundwater infiltrating from surroundings into the landfills. During the waste disposal stage, differential settlement and tensile stress of the geosynthetic materials could occur due to impact load of trucks and dozers, waste loads and weak foundation soils. In this study, the tensile strength and tracer test were performed to evaluate the stability of geomembrane liner systems. Based on the tensile strength test result of in-situ geomembrane sample, the yield tensile strength maintain the suitable strength by specification and current law. However, according to the tracer test, the damage of geomembrane liner was detected on sanitary landfill section.