• 한국전자파학회논문지
• /
• 제27권1호
• /
• pp.50-59
• /
• 2016

본 논문은 $0.11{\mu}m$ CMOS 공정을 이용한 4세대 통신용 광대역 고 선형 전력 증폭기의 설계와 구현에 관해 기술한다. 1:2 트랜스포머(transformer)를 사용하여 출력단 매칭을 구현하였고, 인터 스테이지(inter-stage) 매칭에서 선형성을 고려한 설계가 포함되었다. 1.8 GHz에서 2.3 GHz까지, 10 MHz의 대역폭을 가지는 LTE 16-QAM 신호를 이용하여 측정한 결과, 인접채널 누설 비(ACLR)가 -30 dBc 이하일 때 27.3 dBm 이상의 선형 출력 전력을 얻을 수 있었고, 같은 조건에서 입력 신호 전력을 고려한 효율(PAE)은 최소 26.1 %로 나타남을 확인하였다.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1403-1419
• /
• 2015

When precast concrete infill panels are connected to steel frames at discrete locations, interaction at the structural interface is neither complete nor absent. The contribution of precast concrete infill panels to the lateral stiffness and strength of steel frames can be significant depending on the quality, quantity and location of the discrete interface connections. This paper presents preliminary experimental and finite element results of an investigation into the composite behaviour of a square steel frame with a precast concrete infill panel subject to lateral loading. The panel is connected at the corners to the ends of the top and bottom beams. The Frame-to-Panel-Connection, FPC4 between steel beam and concrete panel consists of two parts. A T-section with five achor bars welded to the top of the flange is cast in at the panel corner at a forty five degree angle. The triangularly shaped web of the T-section is reinforced against local buckling with a stiffener plate. The second part consists of a triangular gusset plate which is welded to the beam flange. Two bolts acting in shear connect the gusset plate to the web of the T-section. This way the connection can act in tension or compression. Experimental pull-out tests on individual connections allowed their load deflection characteristics to be established. A full scale experiment was performed on a one-storey one-bay 3 by 3 m infilled frame structure which was horizontally loaded at the top. With the characteristics of the frame-to-panel connections obtained from the experiments on individual connections, finite element analyses were performed on the infilled frame structures taking geometric and material non-linear behaviour of the structural components into account. The finite element model yields reasonably accurate results. This allows the model to be used for further parametric studies.

• 해양환경안전학회지
• /
• 제21권6호
• /
• pp.770-777
• /
• 2015

본 논문에서는 전동기 구동장치를 선정하여 리액터 용량 및 종류, 부하의 크기에 따라 고조파 왜형률 변화추이를 검토하여 선박 및 해양플랜트에 적용 가능한 최적의 용량선정 근거를 마련하였다. AC라인 리액터와 DC링크 리액터는 가변주파수 구동장치 입력전류의 고조파를 크게 저감시키는 역할을 하며, 동일한 효과를 얻기 위한 DC링크 리액터의 인덕턴스가 AC라인 리액터 인덕턴스의 약 1.7배가 되어야 한다는 것을 시뮬레이션을 통하여 고찰하였다. 소프터웨어 PSIM을 활용하여 각 상황에 따른 전류 고조파 왜형률을 분석하였다.

• 대한조선학회논문집
• /
• 제29권1호
• /
• pp.103-112
• /
• 1992

선박의 최종굽힘 모멘트는 설계에 적용되는 주요강도로써 이를 추정하는 여러방법들이 제안되었는데, 판과 보강재로 이루어진 구조요소의 압축 최종강도에 대한 추징에서 시작되는 것이 일반적이다. 본 논문에서는 최종굽힘 모멘트를 구하기 위해 보강판의 압축 강도추정을 지금까지 제안된 여러가지 방법을 정리하여 소개하고, 실선 설계에 적용될 수 있는 유용성 측면에서 검토하였다. 그 결과를 이용하여 3척의 살물선에 대한 신뢰성 해석을 수행하였다. 선박에 작용하는 파랑굽힘 모멘트는 선급규정에 의해 계산하였다. 본 연구의 신뢰성 해석 문제는 안전여유식의 형태가 비선형임을 고려하여 Advanced First-Order Reliability Method를 이용하였다. 몇가지의 해석예로부터 선체구조의 신뢰성 검토측면에서 최종강도 추정방법을 비교하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권4호
• /
• pp.274-285
• /
• 2011

The supercavitating vehicle is an underwater vehicle that is surrounded almost completely by a supercavity to reduce hydrodynamic drag substantially. Since the cruise speed of the vehicle is much higher than that of conventional submarines, the drag force is huge and a buckling may occur. The buckling phenomenon is analyzed in this study through static and dynamic approaches. Critical buckling load and pressure as well as buckling mode shapes are calculated using static buckling analysis and a stability map is obtained from dynamic buckling analysis. When the finite element method (FEM) is used for the buckling analysis, the solver requires a linear static solver and an eigenvalue solver. In this study, these two solvers are integrated and a consolidated buckling analysis module is constructed. Furthermore, Particle Swarm Optimization (PSO) algorithm is combined in the buckling analysis module to perform a design optimization computation of a simplified supercavitating vehicle. The simplified configuration includes cylindrical shell structure with three stiffeners. The target for the design optimization process is to minimize total weight while maintaining the given structure buckling-free.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1130-1147
• /
• 2014

Large size ships have a very flexible construction resulting in low resonance frequencies of the structural eigen-modes. This feature increases the dynamic response of the structure on short period waves (springing) and on impulsive wave loads (whipping). This dynamic response in its turn increases both the fatigue damage and the ultimate load on the structure; these aspects illustrate the importance of including the dynamic response into the design loads for these ship types. Experiments have been carried out using a segmented scaled model of a container ship in a Seakeeping Basin. This paper describes the development of the model for these experiments; the choice was made to divide the hull into six rigid segments connected with a flexible beam. In order to model the typical feature of the open structure of the containership that the shear center is well below the keel line of the vessel, the beam was built into the model as low as possible. The model was instrumented with accelerometers and rotation rate gyroscopes on each segment, relative wave height meters and pressure gauges in the bow area. The beam was instrumented with strain gauges to measure the internal loads at the position of each of the cuts. Experiments have been carried out in regular waves at different amplitudes for the same wave period and in long crested irregular waves for a matrix of wave heights and periods. The results of the experiments are compared to results of calculations with a linear model based on potential flow theory that includes the effects of the flexural modes. Some of the tests were repeated with additional links between the segments to increase the model rigidity by several orders of magnitude, in order to compare the loads between a rigid and a flexible model.

• 한국전산구조공학회논문집
• /
• 제13권2호
• /
• pp.197-208
• /
• 2000

최 등/sup 1)/은 total lagrangian formulation에 근거한 증분 평형방정식을 적용하고, 강도행렬 산정시 회전각의 2차항을 포함시켜 기하학적 비선형 해석시 해의 수렴성을 향상시켰다. 또한 등매개 쉘 유한요소의 단점인 전단구속 현상과 제로 에너지 모드가 발생하는 문제를 극복하기 위하여 가정 변형률장을 적용하여 보강된 판 및 쉘 구조의 비선형 해석법을 개발하였다. 본 연구에서는 잔류응력을 고려한 쉘구조의 극한강도 해석을 수행하기 위하여, 대변형거동과 함께 소성붕괴거동을 추적할 수 있는 알고리즘을 제시한다. 잔류응력을 고려한 증분평형방정식에 return mapping algorithm을 이용한 탄소성 해석법을 결합시켜서 보강된 판 및 쉘구조의 극한거동을 파악한다. 수치해석 예제를 통하여 본 연구에서 제시된 유한요소 및 비선형 해석 알고리즘에 대한 효율성 및 적용성을 확인하였다.

• 한국철도학회논문집
• /
• 제12권4호
• /
• pp.472-480
• /
• 2009

장대레일의 축력해석은 기하적 비선형 및 재료적 비선형해석을 수행하여야 하므로 그 해석 자체가 비선형 해석으로서 난해하고 하중이력의 적용순서 등에 따라 해석결과가 다르게 나타난다. 이러한 해석의 이론적 복잡성과 어려움에 비하여 철도교량위에 부설된 장대레일의 축력해석결과는 레일의 좌굴이 미미하여 기하적 비선형성이 미소하므로 그 예측이 가능하며 아주 단순하게 나타나게 된다. 본 연구는 교량상 장대레일의 축력해석에서 기하적 비선형성이 미소하여 해석 결과에 거의 영향을 미치지 못하므로 재료적 비선형성만을 고려하여 비선형해석을 수행하는 방법을 개발하였다. 이는 레일 체결 시스템의 비선형 저항력을 힘-변위 관계로부터 선형관계로 재구성시켜 선형해석법으로 수회 반복시키게 되면 간단하게 수렴됨으로 해석결과를 쉽게 얻을 수 있는 장점이 있다. 이러한 해석결과를 기존의 해석예들과 결과를 비교함으로서 효율적인 교량상 장대레일의 안정성 해석이 가능함을 알 수 있었다.

• Journal of Species Research
• /
• 제2권2호
• /
• pp.159-166
• /
• 2013

Typical of large, oligotrophic lakes, Lake H$\ddot{o}$vsg$\ddot{o}$l, Mongolia, exhibits complex morphometry which should support a spatially heterogeneous community of benthic macroinvertrates. The lake also exhibits a broad range of land uses. Based on the variation in land use and complex physical habitat of the lake (e.g. substrate variation and presence of affluent streams in bays), we asked two questions. First, does density of total benthic macroinvertebrates vary between different bays in Lake H$\ddot{o}$vsg$\ddot{o}$l? Second, does density of individual benthic taxa vary by bay? Samples collected in 1997, the last year for benthic sampling of the lake, were designed to test for variation in macroinvertebrate density between bays and can now be used to establish baseline variation in density for future studies. A total of 56 Ponar grab samples were analyzed from six bays in Lake H$\ddot{o}$vsg$\ddot{o}$l. Results of a general linear model analysis of variance showed that total density of macroinvertebrates varied only slightly between bays of the lake, but that most individual taxa showed significant variation between bays. Variation in density for most taxa was linked to substrate composition rather than other geographic or physical variables in the lake. Recent increases in grazing intensity and ecotourism along the shores should be managed to reduce the nutrient load into the lake to avoid impairment of the benthic biota of this unique, ancient ecosystem.

• Journal of Welding and Joining
• /
• 제29권2호
• /
• pp.72-79
• /
• 2011

The scope of this investigation is to evaluate the effect of joining parameters on the microstructural features and mechanical properties of dissimilar aluminum alloys, 1mm-thickness fixing AA6K31 at the top position and fixing AA5J32 at the bottom position. The friction stir lap welds were studied under various welding conditions, rotation speed of 1000, 1250, 1500rpm and welding speed of 100, 300, 500, 700mm/min, respectively. Mechanical test has been investigated in terms of tensile shear test and hardness test. The results showed that three type nugget shapes such as onion ring, zigzag type, hooking with the void, have been observed with revolutionary pitch. All welding conditions fractured at the HAZ of top plate, A6K31 and also the strength compare with base metal of lap joints were low efficiency, 52~63%. The thickness of fractured position was decreased with the lower heat input conditions. The relationships were excellent due to linear between the effective thickness of fractured position and peak load. The fractured position was the interface between joint area and not joint area. Also the strength efficiency compared with base metal was lower than decreasing rate of thickness because the hardness was decreased at fractured position due to softened material.