• Cartoon and Animation Studies
• /
• s.40
• /
• pp.397-421
• /
• 2015

Aristotle's Poetics is the earliest work of dramaturgy. It explains some of the most important narrative notions, for example, Mimesis, Katharsis, Mythos(Plot), Ethos(Character), Anagnorisis and Peripeteia. etc. Aristotle considered the plot which is the arrangement of events, as the most important element of drama. This paper presents an example of a plot configuration as an alternative to the traditional narration used since Aristotle. Dead Island, developed by Techland and published by Deep Silver, is one of the most successful action role-playing survival zombie video games. Its trailer, the Winner of Gold Prize for Internet Film at Cannes Lions International Festival of Creativity in 2011. Since the purpose of the trailer is to attract the audiences/gamers to the film/game, it has generally a similer narrative method from its own works. But Dead Island trailer is different. We treat this trailer as an short animation. It could be a new example of the non-linear narrative by the control of the time for example, temporal arrangement, direction and speed. We analyse all shots of Dead Island's trailer with Poetics' rules and with $G{\acute{e}}rard$ Genette's some narrative notions for example temporal order and duration. Furthermore we look for how to maximize the audiences' curiosity by the adjustment of the time, combined with its shocking images.

• Journal of Navigation and Port Research
• /
• v.45 no.4
• /
• pp.212-223
• /
• 2021

The objective of this study was to evaluate structural safety according to environmental conditions acting on the piping of offshore structure and the motion of the structure. As for conditions acting on the piping, the maximum and minimum temperature conditions were used to analyze the design conditions of N2 generator. The motion of the structure was calculated and applied according to the DNV(Det Norske Veritas) rule. Each condition was combined and a total of 26 load combinations were constructed according to thermal load, motion load, and presence or absence of pipe support. Analysis was performed using a commercial program MSC Patran/Nastran. Thermal analysis was performed by applying the steady-state method, Sol 153. Thermal-structural coupled analysis was performed using Sol 101, a linear-static method. As a result of the analysis, the stress tended to increase when temperature inside the pipe was lower in Set 1 and Set 2, when temperature was higher in Set 3, and when the temperature difference between the inside and outside of the pipe in Set 4 was increased. However, the sum of stresses in the condition with only temperature load and the condition with only the kinetic load did not show the same value as the stress in the composite load condition of two loads. That is, the influence of the motion load varied depending on the direction of motion, the arrangement of pipes, and the position of the support. Therefore, it is necessary to comprehensively consider the size and direction of the motion load acting on the piping, the arrangement of the piping, and the location of the pipe supports during the design of piping.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.7-11
• /
• 2008

In order to investigate the application of bamboo in various ways in floral designs, we analyzed 108 bamboo items from the monthly magazine 'Fleur' and from the International Flower Contest held from 2001 to 2006. We analyzed the frequency of usage of bamboos by the used parts, kind of design, type of design, and arrangement method in the design work. In terms of the used parts of the bamboo, stems took 90% of the whole work. Among the 77 designs that used stems, excluding the 20 work items presented in the International Flower Contest which has been held in April, number of the bamboo work items peaked at the beginning of the year in January and February, and during summer (July and August). Upon analyzing the type of stems that were used in the 97 works, 63% of the works used bamboo in natural state, but not processed. 48% of the works used the vertical-parallel method among the arrangement methods. Other categorized works were rounded works that were not included in the vertical, horizontal or diagonal mathod. More than 50% of the works, including the table decoration, used space decoration. Among the types of work design that used bamboo as material, 64% were decorative type, 30% graphic type, and 4% formal-linear type.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.364-370
• /
• 2009

The aim of this study was to evaluate the effect of fiber direction on the polymerization shrinkage of fiber-reinforced composite. The disc-shaped flowable composite specimens (d = 10 mm, h = 2 mm, Aeliteflo A2, Bisco, Inc., IL, USA) with or without glass fiber bundle (X-80821P Glass Fiber, Bisco, Inc., IL, USA) inside were prepared, and the longitudinal and transversal polymerization shrinkage of the specimens on radial plane were measured with strain gages (Linear S-series 350${\Omega}$, CAS, Seoul, Korea). In order to measure the free polymerization shrinkage of the flowable composite itself, the disc-shaped specimens (d = 7 mm, h = 1 mm) without fiber were prepared, and the axial shrinkage was measured with an LVDT (linear variable differential transformer) displacement sensor. The cross-section of the polymerized specimens was observed with a scanning electron microscope to examine the arrangement of the fiber bundle in composite. The mean polymerization shrinkage value of each specimen group was analyzed with ANOVA and Scheffe post-hoc test (${\alpha}$=0.05). The radial polymerization shrinkage of fiber-reinforced composite was decreased in the longitudinal direction of fiber, but increased in the transversal direction of fiber (p<0.05). We can conclude that the polymerization shrinkage of fiber-reinforced composite splint or restoratives is dependent on the direction of fiber.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.979-984
• /
• 2001

As a preceding process for developing design technology and establishing operation technology, the design procedure of the SCR(Selective Catalytic Reduction) pilot plant that can handle $1,000Nm^{3}/hr$ of flue gas was reported in this paper. And we also considered several factors that might cause abnormality of the plant in the designing process. The plant was designed and fabricated to test the $DeNO_{x}$ performances in variable operating conditions in the range of $3,000{\sim}36,000hr^{-1}/hr$ in space velocities, $1.67{\sim}6\;m/s$ in linear velocities, $200{\sim}500^{\circ}C$ temperatures, $300{\sim}1,000Nm^{3}/hr$ flow rates, and $0{\sim}1.4:1\;NH_{3}/NO$ ratios. In order to maintain the flow uniformity, the guide vanes and flow straightener were designed and constructed in the plant. The SCR pilot plant can be operated by the automatic control system, which enable to obtain performance data in real time and to set up the operating technology. The catalyst reactor consists of 4 catalyst layers and surface area of each layer can be adjusted to be of small size. Arrangement of catalysts per layer is $3{\times}6$ with the catalyst dimensions of $150{\times}150{\times}500mm(L{\times}W{\times}H)$.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.889-895
• /
• 2011

PMLSM is structurally simple and it have a lot of merits such high speed, high thrust force etc., but cogging force by slot-teeth structure of armature and cogging force by outlet edge effect occurs. This is the cause of thrust force ripple and generate the noise and vibration. Therefore, in this paper we proposed installation of an auxiliary pole to mover of the PMLSM in order to decrease cogging force by the outlet edge which came necessarily into being discontinuous arrangement of the armature. Also, outlet edge cogging force designed a form of the auxiliary pole which the minimum became, and we compared a outlet edge cogging force characteristic along a winding method of an armature as we used 2-D of finite element analysis.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.626-631
• /
• 2020

In this paper, a study on beam synthesis technique of conformal array was performed. It is applied to various radar systems that can perform beam steering without deterioration of performance due to beam steering in a general linear arrangement. Unlike the beam synthesis technique in the planar linear array, the conformal array has a radiation element located on a curved surface, so it is necessary to compensate for a difference in length from the radaation element to the wave front surface. In addition, by calculating the offset angle for each radiation element and applying it during actual synthesis, it was possible to predict an accurate beam pattern. In this paper, length compensation and offset angle were calculated and applied to beam pattern synthesis to perform beam pattern comparison, and performance was compared through mathematical analysis.

• Journal of Biomedical Engineering Research
• /
• v.13 no.2
• /
• pp.133-140
• /
• 1992

Bioelectrical Impedance method for measuring human body composition is based upon the principle that the electrical conductivity of the fat-free mass (FFM) is far greater than that of the (at. Deter- mination o( impedance was nlade in 30 healthy and obese men aged $40.9{\pm}14.7$yr (mean${\pm}$SD) and 25 healthy and obese women aged $44.0{\pm}10.2$ yr. A commercial impedance body fat analyzer was used with a four electrode arrangement that introduced a painless constant current(ImA at 50 kHz) into the body. Linear relationships were found between impudence values and FFM(r=-0.786) and between weight and FFM(r=0.837). Signigicant increases in the correlation coefficients were ob served when the predicator Hta/z was regressed against FFM(r=0.912) where Ht Is height and Z Is impedance. A linear regression equation, FFM=0.586(Htf/z) +0.317(Weight) -1.674(r=0.977), was found. The correlation coefficient of % body fat between the impedance and infrared methods was 0.898. These data Indicate that the bioelectrical impedance technique is a reliable and valld approach for the estimation of human body composition. This method Is safe, noninvasivr, prouides rapld measure menu, requires little operator skill and subject cooperation, and Os portable. Finally measurement of percent body fat was made possible using both the regression equation and a developed impedance measuring device which measures impedance between wrist and ankle.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.3
• /
• pp.73-82
• /
• 1999

In this study, the optimal analysis for pipe network is performed for the combined ideal pipe network system(CASE 1, CASE 2 and CASE 3) which is composed of 25 nodes, 41 elements, and 1 fixed nodal head with evaluating pressure variation distribution of main and branch in grid composed drainage pipe network. The linear analysis technique used as the analysis method in this study, the KYPIPE being used extensively as the linear technique to design and analysis of pipe network is applied. Firstly, in the analysis of pipe network, the CASE 2 and CASE 3 supply same thing(value) in the result of considering the total flow provided each pipeline, but in the general intension in the case of CASE 2, relative width of supply is more large than CASE 1 and CASE 3. Secondly, in the analysis technique of pipe network, CASE 3 is analysed largest as a result of comparing with same heads, and in the order of their size CASE 2 and CASE 1 were determined but the difference doesn't appear to be obvious. Thirdly, as the result of determining main factor, pressure in the design and analysis of net work. CASE 3 is from Node 3 to 25 than CASE 1 and CASE 2 and it is determined in the order of their size, CASE 2 and CASE 1. Finally, in this study, discharge flow distribution is evaluated in the same condition with 3-type CASE in the case of branch position for designing optimal composed drainage pipe network. As the result of that, branch pipe perform. Therefore, it is thought that the efficient and reasonable management of water supply and sewerage design will be possible if it give all our energies to study at the pipe system design in and out of country in the future.

• Preventive Nutrition and Food Science
• /
• v.1 no.2
• /
• pp.239-243
• /
• 1996

Three hundred and twenty-four 1 day old chicks were used to determine the effects of fat source and energy to protein ratio on growth performance , carcass composition and the efficiency on nutrient utilization. Chicks were assigned. in a completely randomized design, to 3*3 factorial arrangement of treatments. Chicks received one of three fat sources (n0 fat, tallow, corn oil) and one of three energy to protein ratios(16, 14 and 12kcal ME/g CP). All diets were formulated to be isocaloric(3.2Mcal ME/kg diets) using published ME values for the diet ingredients. Addition of tat to the diet increased ADG, average daily feed intake, and gain to feed, Chicks fed diets containing fat had increased percentage body DM and ether extract(EE), but percentage CP was not different, Chicks fed diets containing fat had increased efficiency of protein and energy deposition. Addition of fat ad either fallow or corn oil yielded similar results. Reducing the energy to protein ratio of the diet did not affect ADG or gain to feed, but tended to decrease average daily feed intake(p=0.80), as well as resulting in linear(p<0.05) reductions in body percentage DM., EE and also total EE. Increasing the energy to protein ratio did not affect percentage or total body Cp. Adding fat to poultry diets improved growth performance and the efficiency of growth chicks. Decreasing the energy to protein ratio did not affect growth performance, but reduced EE in the body of Chicks.