• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.3
• /
• pp.185-192
• /
• 1991

The vertical distribution and chemical characteristics of water masses were measured along two south-north transects in the polar front region of the central Korean East Sea. In February, a thermocline was present at depth between 50m and loom at the southern sites of a landward A-transect, and its depth was gradually deepened northward. At an outside B-transect, a thermocline was observed at significantly deep depth of 300m to 400m at two northern stations(Stn. 10 and 11), though the depth of the southward stations was nearly identical to that at the northward stations on a A-transect. In September, there were vertically more various water masses, i.e. the Tsushima Warm surface water(TWSW) or more than $20^{\circ}C$, the Tsushima Middle water(TMW) with a range of $12{\~}17^{\circ}C$, the North Korea Cold Water(NKCW) with $1{\~}7^{\circ}C$ temperature, the Japan Sea Proper Water(JSPW) of less than $1^{\circ}C$, and the mixed water. The North Korea Cold Water could be distinguishable from the other waters, especially from the mixed water of the Tsushima Middle Water and the Japan Sea Proper Water by the pattern of $T-O_2$ diagram. For instance, the North Korea Cold Water had higher oxygen by $1{\~}2ml/l$ than those in the mixed water, although both the two water masses ranged $1{\~}7^{\circ}C$ in water temperature. AOU value was the highest in the JSPW and the lowest in the TWSW. Also, AOU indicated a nearly linear and negative correlation with water temperature. However, AOU data for two masses, the NKCW and the TMW, in September departed remarkably from a regression line. Moreover, the ratio of $$\Delta P/\Delta AOU)$ in September was about $0.45{\mu}g-at/ml$ and higher than the value observed in the open sea. This high value could be elucidated by two factors; intrusion of the NKCW with high oxygen and molecular diffusion of dissolved oxygen from the surface into the lower layer. AOU would be a useful tracer for water masses in the polar front area of the Korean East Sea.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.453-457
• /
• 2016

This study investigates the hatching periods and hatchability of the eggs of Pochazia shantungensis at different collection times from 2011 to 2014, and the effect of temperature on the growth of P. shantungensis nymphs in an area of its outbreak. The hatchability of P. shantungensis eggs varies with their collection time; their hatchability in late November was higher than that in March of the next year, but no difference was observed in their hatching periods. The hatching periods of the eggs were 51.2, 31.3, 24.8, 19.4, 17.1, and 19.4 days at 15, 18, 21, 24, 27, and $30^{\circ}C$, respectively. The hatchability was above 70% at temperatures ranging from 18 to $27^{\circ}C$. The hatching time of the overwintered eggs in the Gurye region in Korea was reduced by 9 days from 2011 to 2014. The hatching rate was relatively higher when the average temperature in the winter season was relatively warmer. The dvelopmental periods of the first to fifth nymphs were 82.8, 58.0, 45.8, and 39.6 days at 18, 21, 24, and $27^{\circ}C$, respectively, at the relative humidity of 40~70%, and a photoperiod off 14 h light:10 h dark. The higher the temperature, the shorter the developmental period. At $30^{\circ}C$, all life stages after the fourth nymph died. Thus, the optimum growth temperature was estimated to be $27^{\circ}C$. For all life stages from the egg to the fourth nymph, the relationship between the temperature and developmental rate was expressed by the linear equation Y = 0.0015 X - 0.014. The lower developmental threshold was $9.3^{\circ}C$ and the effective cumulative temperature was 693.3 degree-days. The lower developmental threshold of approximately $3.8^{\circ}C$ was the lowest at the fourth nymph stage.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.261-268
• /
• 2010

This study is compared that the dose distribution by experimentation and radiation therapy planning (RTP) when the air cavity region was treated high energy photon. The dose measurements were performed with a 6 MV photon beam of linear accelerator. The polystyrene and self made acyl phantom were similar to tissue density of the human body. A parallel plate chamber was connected to an electrometer. The measurement setup was SCD (Source Chamber Distance) 100 cm and the distance of surface from air cavity was 3 cm. Absorbed dose of interface were measured by area and height. The percent depth dose were measured presence and absence of air cavity, depth according to a ratio of field size and air cavity size. The dose distribution on planning was expressed to do the inhomogeneity correction. As the area of air cavity was increased, the absorbed dose were gradually reduced. It was slightly increased, when the height of air cavity was changed from 0 cm to 0.5 cm. After the point, dose was decreased. In case of presence of air cavity, dose after distal air cavity interface was more great than absence of air cavity. The rebuild up by field size and area of air cavity occurred for field size, $4{\times}4\;cm^2$, $5{\times}5\;cm^2$ and $6{\times}6\;cm^2$, with fixed on area of air cavity, $5{\times}5\;cm^2$. But it didn't occur at $10{\times}10\;cm^2$ field size. On the contrary, the field size was fixed on $5{\times}5\;cm^2$, rebuild up occurred in area of air cavity, $4{\times}4\;cm^2$, $5{\times}5\;cm^2$. but, it did not occur for air cavity, $2{\times}2\;cm^2$, $3{\times}3\;cm^2$. All of the radiation therapy planning were not occurred rebuild up. It was required to pay attention to treat tumor in air cavity because the dose distribution of planning was different from the dose distribution of patient.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.4
• /
• pp.1-13
• /
• 2012

Landscape Garden tradition of excellent examples of places that are focused on hydroponics management. South Korea and China, this thing was noticeable among them South Korea which emphasizes the natural contours of the natural streams in accordance with the basic idea to use examples that feature will do. Gardens in China by constructing a flat terrain also naturally expect to find examples of conscious ideas depending on the water and the mountains are characterized. These differences and similarities through the Gardens of the tradition of separating the two countries to build their Garden by site Soswaewon and Zolzengwon appear in the target hand is to identify the characteristics between the director. Research methods literature survey, field survey of the natural environment through the plantation, background history, the people who intend to study, to configure the ground water space, Jian, construction and management has been studied in hydroponics. As a result, Damyang-gun, Jeollanam-do, South Korea in the Garden of the Soswaewon(瀟灑園) organization with inner garden and outer garden of a small, but the scale of production to Yang San-Bo's 'eunilgwan' implement security based rock mooring takes the form of a linear channel and the water came down from riding pending to avoid artifacts gathered again took the form of streams flowing into that. Hutton was a rubble pile structure Jian. Building an Gwangpunggak, Jewoldang, as Daebongdae consist, respectively, depending on the purpose of the mooring was deployed by focusing. The other hand, is located at Suzhou, Jiangsu of China Zolzengwon(拙政園) flat terrain is located on. Largely divided eastern gardens, Central Gardens and the Gardens of the West was conducted by five thirds of the total area of Water accounted for. Pavilion the center of the pond, Seokgasan achieve a variety of landscapes and architectural features that are most of the Ming. The two countries, each region's natural environment and human environment, different, unique characteristics to each other in the implementation of a unique hydroponic Garden tube and ideological backgrounds, but especially the 'eunilgwan' and the terrain that is divided according to the conditions of this study, so fulfilling Garden was conducted.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.419-428
• /
• 2021

In order to develope a mobile-based greenhouse energy calculation program, firstly, the overall thermal transmittance of 10 types of major covers and 16 types of insulation materials were measured. In addition, to estimate the overall thermal transmittance when the cover and insulation materials were installed in double or triple layers, 24 combinations of double installations and 59 combinations of triple installations were measured using the hotbox. Also, the overall thermal transmittance value for a single material and the thermal resistance value were used to calculate the overall thermal transmittance value at the time of multi-layer installation of covering and insulating materials, and the linear regression equation was derived to correct the error with the measured values. As a result of developing the model for estimating thermal transmittance when installing multiple layers of coverings and insulating materials based on the value of overall thermal transmittance of a single-material, the model evaluation index was 0.90 (good when it is 0.5 or more), indicating that the estimated value was very close to the actual value. In addition, as a result of the on-site test, it was evaluated that the estimated heat saving rate was smaller than the actual value with a relative error of 2%. Based on these results, a mobile-based greenhouse energy calculation program was developed that was implemented as an HTML5 standard web-based mobile web application and was designed to work with various mobile device and PC browsers with N-Screen support. It had functions to provides the overall thermal transmittance(heating load coefficient) for each combination of greenhouse coverings and thermal insulation materials and to evaluate the energy consumption during a specific period of the target greenhouse. It was estimated that an energy-saving greenhouse design would be possible with the optimal selection of coverings and insulation materials according to the region and shape of the greenhouse.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.965-973
• /
• 2021

Since radiation therapy is irradiated with high-energy X-rays in a variety of at least 20 Gy to 80 Gy, a high dose is administered to the local area where the tumor is located, and various side effects of some normal tissues are expected. Currently, in clinical practice, lead, a representative material, is used as an effort to shield normal tissues, but lead is classified as a heavy metal harmful to the human body, and a large amount of skin contact can cause poisoning. Therefore, this study intends to manufacture a measurement sheet that can compensate for the limitations of lead using the materials Tungsten, Brass, and Copper of the 3D printer of the FDM (Fused Deposition Modeling) method and to investigate the penetration performance. Tungsten mixed filament transmission measurement sheet size was 70 × 70 mm and thickness 1, 2, 4 mm using a 3D printer, and a linear accelerator (TrueBeam STx, S/N: 1187) was measured by irradiating 100 MU at SSD 100 cm and 5 cm in water using a water phantom, an ion chamber (FC-65G), and an elcetrometer (PTW UNIDOSE), and the permeability was evaluated. As a result of increasing the measurement sheet of each material by 1 mm, in the case of Tungsten sheet at 3.8 to 3.9 cm in 6 MV, the thickness of the lead shielding body was thinner than 6.5 cm, and in case of Tungsten sheet at 4.5 to 4.6 cm in 15 MV. The sheet was thinner than the existing lead shielding body thickness of 7 cm, and equivalent performance was confirmed. Through this study, the transmittance measurement sheet produced using Tungsten alloy filaments confirmed the possibility of transmission shielding in the high energy region. It has been confirmed that the usability as a substitute is also excellent. It is thought that it can be provided as basic data for the production of shielding agents with 3D printing technology in the future.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.1
• /
• pp.55-64
• /
• 2019

The flowering seasons can be advanced due to climate change that would cause an abnormally warm winter. Such warm winter would increase the frequency of crop damages resulted from sudden occurrences of low temperature before and after the vegetative growth stages, e.g., the period from germination to flowering. The degree and pattern of freezing damage would differ by the development stage of each individual fruit tree even in an orchard. A critical temperature, e.g., killing temperature, has been used to predict freeze damage by low-temperature conditions under the assumption that such damage would be associated with the development stage of a fruit flower bud. However, it would be challenging to apply the critical temperature to a region where spatial variation in temperature would be considerably high. In the present study, a phenological model was used to estimate major bud development stages, which would be useful for prediction of regional risks for the freeze damages. We also derived a linear function to calculate a probabilistic freeze risk in spring, which can quantitatively evaluate the risk level based solely on forecasted weather data. We calculated the dates of freeze damage occurrences and spatial risk distribution according to main production areas by applying the spring freeze risk function to apple, peach, and pear crops in 2018. It was predicted that the most extensive low-temperature associated freeze damage could have occurred on April 8. It was also found that the risk function was useful to identify the main production areas where the greatest damage to a given crop could occur. These results suggest that the freezing damage associated with the occurrence of low-temperature events could decrease providing early warning for growers to respond abnormal weather conditions for their farm.

• 한국노년학
• /
• v.40 no.1
• /
• pp.197-216
• /
• 2020

This study aimed to suggest leisure activities and policy-level support in the light of the characteristics and needs among the elderly by examining constraint factors of leisure activities among the elderly. Data of 3887 elderly with the age of 65 and above with economic burden and health problems from the 6th Korean Retirement and Income study were used for the statistical analyses. Hierarchical linear models were tested by entering factors stepswise; demographic factors(age, gender, marriage status, single household, region, living expenses, health status) in the first step, leisure factors(leisure time, leisure motivation) in the second step, and lastly leisure activity factors(desired leisure activities, undesired leisure activities) in the third step. The results were as follows: First, major factors that constrict leisure activities of the elderly were financial burden and health problems. Second, there were significant differences among three(financial constraint, health constraint, and financial and health constraint) groups. Financial constraint group was the highest in the level of leisure satisfaction but leisure time was the shortest. The major reason to do leisure activities of the financial constraint group was to keep relationships with families and friends. In terms of desired leisure activities, health constraint group wanted resting, financial constraint group wanted hobbies and entertainment, and the financial-and-health constraint group wanted social activities. Third, financial constraint group demonstrated higher levels of leisure activity satisfaction when they wanted to take care of pets or gardens; however, they showed lower levels of leisure activity satisfaction when they wanted to domestic trips for desired leisure activities. In case of health constraint group, they demonstrated lower levels of leisure activity satisfaction whether or not they wanted resting like watching TV or listening to the radio. And, the showed higher levels of leisure activity satisfaction when they wanted social activities such as participation in religion or social gathering organizations. For the financial-and-health constraint group, whereas they showed lower levels of leisure activity satisfaction when they wanted walking around or watching TV, and domestic trips for desired leisure activities, they demonstrated higher levels of leisure activity satisfaction when they wanted entertainment doing the game of go, or chess, and hobbies like hiking and social activities. Practice and policy level suggestions to offer leisure activities that meet the needs of the elderly were made based on the study results.

• Journal of the Korean earth science society
• /
• v.43 no.2
• /
• pp.283-302
• /
• 2022

Despite the nationwide COVID-19 lockdown in China since January 23, 2020, haze days with high PM₁₀ levels of 88-98 ㎍ m^-3 occurred on February 1 and 2, 2020. During these haze days, the East Asian region was affected by a warm and stagnant air mass with positive air temperature anomalies and negative zonal wind anomalies at 850 hPa. The Weather Research and Forecasting model coupled with Chemistry (WRF-Chem) was used to analyze the variation of regional PM₁₀ aerosol transport in Korea due to decreased anthropogenic emissions in East Asia. The base experiment (BASE), which applies the basic anthropogenic emissions in the WRF-Chem model, and the control experiment (CTL) applied by reducing the anthropogenic emission to 50%, were used to assess uncertainty with ground-based PM₁₀ measurements in Korea. The index of agreement (IOA) for the CTL simulation was 0.71, which was higher than that of BASE (0.67). A statistical analysis of the results suggests that anthropogenic emissions were reduced during the COVID-19 lockdown period in China. Furthermore, BASE and CTL applied to zero-out anthropogenic emissions outside Korea (BASE_ZEOK and CTL_ZEOK) were used to analyze the variations of regional PM₁₀ aerosol transport in Korea. Regional PM₁₀ transport in CTL was reduced by only 10-20% compared to BASE. Synthetic weather variables may be another reason for the non-linear response to changes in the contribution of regional transport to PM₁₀ in Korea with the reduction of anthropogenic emissions in East Asia. Although the regional transport contribution of other inorganic aerosols was high in CTL (80-90%), sulfate-nitrate-ammonium (SNA) aerosols showed lower contributions of 0-20%, 30-60%, and 30-60%, respectively. The SNA secondary aerosols, particularly nitrates, presumably declined as the Chinese lockdown induced traffic.

• Journal of Korean Dental Hygiene Science
• /
• v.6 no.2
• /
• pp.173-182
• /
• 2023

Background: This study aims to investigate the effect of restrictions on oral health-related activities of young adults, middle-aged, and elderly in Korea on the quality of life and contribute to the development of intervention strategies to improve the quality of life by improving the importance of oral health care and healthy lifestyle habits of adults. Methods: The 8th National Health and Nutrition Survey was used, targeting adults categorized into three age groups: young adults aged 19 to 29, middle-aged adults aged 30 to 49, and prime-aged adults aged 50 to 64. Demographic characteristics and EQ-5D, HINT-8 and oral-related toothache experience, chewing problems, speaking problems, and complaint of discomfort to chew analyzed. T-test and one-way ANOVA were performed to find out the difference in quality of life according to the restrictions on oral activities of adults, and linear regression analysis was performed to investigate the factors affecting the quality of life of adults. Results: The differences between EQ-5D and HINT-8 according to the restrictions on oral health-related activities of young, middle-aged, and prime-aged were statistically significant in all oral activity restriction variables(p ≦0.05). Factors affecting EQ-5D of all adults were statistically significant in all variables such as region, gender, household monthly income, education level, basic living status, economic activity, subjective oral health status, toothache experience, chewing problem, speaking problem, and complaint of discomfort to chew(p ≦0.05). Factors affecting HINT-8 of all adults were statistically significant in variables such as gender, household monthly income, education level, basic living status, economic activity, toothache experience, chewing, speaking, and complaint of discomfort to chew(p ≦0.05). Conclusions: Various measures are needed to improve the quality of life in old age by allowing adults to face physically, mentally, and socially prepared old age. Based on the results of this study, an adult oral health program should be developed to improve the oral health and quality of life of adults.