• Proceedings of the KSR Conference
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1433-1437
• /
• 2007

This paper describes the detection algorithm which can distinguish series arcing signal from voltage harmonics or noises produced by the operation of non-linear loads. A high pass filter with the cutoff frequency of 3 kHz is designed and it can attenuate power frequency signal to 80 dB. Series arcing phenomena is simulated to an incandescent lamp controlled by a dimmer. From the experimental results, it is confirmed that the amplitude of the filter output voltage varies at random during series arcing but the signal generated by non-linear loads appears on a regular basis. We proposed a series arcing detection algorithm using the chaotic nature of voltage signal.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.452-452
• /
• 2000

This paper deals with a fault detection algorithm for linear descriptor systems via unknown input PI observer. An unknown input PI observer is presented and its realization conditions is proposed by using the rank condition of system matrices. From the characteristics of unknown input PI observer, the states of system with unknown inputs are estimated and the magnitude of failures are detected and isolated easily by using integrated output error under the step failures. Finally, a numerical example is given to verify the effectiveness of the proposed algorithm.

• Journal of the military operations research society of Korea
• /
• 제22권1호
• /
• pp.129-141
• /
• 1996

At present surveillance equipment on the ground of the army is distributed and located by experience element and intellience preparation of the battle field. Therefore, it is hard to utilize the optimal detection capability. This paper is forcused on improving watch ratio of the named area interested(NAI) and maximizing detection area. A linear programming model is developed and network model is established on the basis of the linear programming model. And then Out-of-Kilter algorithm is utilized for the optimal solution. Finally, one of the example is provided it shows that this model minimizes the non-detection area.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.330-335
• /
• 2000

Faults detection and containment requirements are typically allocated from a top-level specification as a percentage of total faults detection and containment, weighted by failure rate. This faults detection and containments are called as a fault coverage. The fault coverage requirements are typically allocated identically to all units in the system, without regard to complexity, cost of implementation or failure rate for each units. In this paper a simple methodology and mathematical model to support the allocation of system fault coverage rates to lower-level units by considering the inherent differences in reliability is presented. The models are formed as a form of constrained optimization. The objectives and constraints are modeled as a linear form and this problems are solved by linear programming. It is identified by simulation that the proposed solving methods for these problems are effective to such requirement allocating.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제24권6호
• /
• pp.628-633
• /
• 2014

This paper proposes a performance improvement method of the conventional double talk detection method which can operate before convergence of the echo canceller. The proposed method estimates the coefficients of the linear predictive coding(LPC) filter by using the primary input signal. The time-varying threshold for double talk detection is determined based on the LPC filter gain of the primary input signal level. The proposed method can reduce not only false detection rate which means wrong detection of single talk as double talk but also double talk detection delay. Computer simulation was performed using a long-term real speech signals. It is shown that the proposed method improves the conventional method in terms of lowering the false detection rate and shortening the detection delay.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제3권6호
• /
• pp.647-666
• /
• 2009

Multiple-input multiple-output (MIMO) multiplexing is an attractive technology that increases the channel capacity without requiring additional spectral resources. The design of low complexity and high performance detection algorithms capable of accurately demultiplexing the transmitted signals is challenging. In this technical survey, we introduce the state-of-the-art MIMO detection techniques. These techniques are divided into three categories, viz. linear detection (LD), decision-feedback detection (DFD), and tree-search detection (TSD). Also, we introduce the lattice basis reduction techniques that obtain a more orthogonal channel matrix over which the detection is done. Detailed discussions on the advantages and drawbacks of each detection algorithm are also introduced. Furthermore, several recent author contributions related to MIMO detection are revisited throughout this survey.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제23권1호
• /
• pp.47-54
• /
• 2019

An improved method of spectrum detection algorithm for mass spectrum analysis system is proposed. In the conventional spectrum detection algorithm that utilizes the results of the linear approximation and quadratic curve fitting on the ion signal block of each mass index, it is possible to reduce the detection error in the mass spectrum detection by further improving the condition of eliminating the invalid ion signals. Also, the proposed method can reduce the estimation error of the peak value of the mass spectrum by using the result of quadratic curve fitting for the effective ion signal block in which the peak position error is corrected. To evaluate the effectiveness of the proposed method, computer simulations were carried out step by step using the measured ion signal. Also, by comparing the rate of false detection for several inputs, the proposed method showed better detection performance than the conventional method.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제22권4호
• /
• pp.785-796
• /
• 2012

In this paper, we propose an effective Behavior-based detection technique using the frequency of system calls to detect malicious code, when the number of training data is fewer than the number of properties on system calls. In this study, we collect the Native APIs which are Windows kernel data generated by running program code. Then we adopt the normalized freqeuncy of Native APIs as the basic properties. In addition, the basic properties are transformed to new properties by GLDA(Generalized Linear Discriminant Analysis) that is an effective method to discriminate between malicious code and normal code, although the number of training data is fewer than the number of properties. To detect the malicious code, kNN(k-Nearest Neighbor) classification, one of the bayesian classification technique, was used in this paper. We compared the proposed detection method with the other methods on collected Native APIs to verify efficiency of proposed method. It is presented that proposed detection method has a lower false positive rate than other methods on the threshold value when detection rate is 100%.

• The Korean Journal of Applied Statistics
• /
• 제35권5호
• /
• pp.593-601
• /
• 2022

We call "fruad" the cases that are not frequently occurring but cause significant losses. Fraud detection is commonly encountered in various applications, including wafer production in the semiconductor industry. It is not trivial to directly extend the standard binary classification methods to the fraud detection context because the misclassification cost is much higher than the normal class. In this article, we propose the functional fraud detection support vector machine (F²DSVM) that extends the fraud detection support vector machine (FDSVM) to handle functional covariates. The proposed method seeks a classifier for a function predictor that achieves optimal performance while achieving the desired sensitivity level. F²DSVM, like the conventional SVM, has piece-wise linear solution paths, allowing us to develop an efficient algorithm to recover entire solution paths, resulting in significantly improved computational efficiency. Finally, we apply the proposed F²DSVM to the defective wafer detection problem and assess its potential applicability.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.199-199
• /
• 1991