• Journal of Astronomy and Space Sciences
• /
• 제20권1호
• /
• pp.63-82
• /
• 2003

Schwarzschild의 선형 계획법을 사용하여 평형상태에서의 구형은하를 기술하는 비 충돌 볼쯔만 방정식의 일반적인 해를 얻었다. 이 계산으로부터 de Vaucouleurs의 광도 법칙을 만족하고 무거운 헤일로를 포함하는 등방성 구형은하의 존재를 확인할 수 있었다. 타원은하에서 속도 분산 곡선이 편평하거나 서서히 증가하는 현상은 암흑물질에 의한 질량대 광도비의 증가로 해석할 수 있다. 이런 경우 암흑물질의 밀도 분포는 core반경이 은하의 유효반경보다 훨씬 작은 값을 갖는다는 사실을 확인할 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권3호
• /
• pp.418-424
• /
• 2006

This experiment was conducted to explore the efficacy of lacquer (Rhus verniciflua) supplementation on growth performance, nutrient digestibility, carcass traits and serum biochemical values in commercial broilers. Eight hundred and forty Hubbard broiler chicks (1d old) were randomly distributed and allotted to four dietary treatments for five weeks. Each treatment had 5 replicates with 42 birds each. The dietary treatments were (1) control (2) 1% lacquer, (3) 2% lacquer and 4) 4% lacquer supplied as meal in the diet. Supplementation with lacquer improved weight gain (p = 0.0960) showing a linear trend during the starter phase (0-3 wk), but weight gain, feed intake and feed conversion ratio remained unaffected at the finisher phase (4-5 wk) and overall (0-5 wk). The nutrient digestibility studies conducted after 18 and 35 days of experimental feeding showed a linear (p<0.05) increase in digestibility of CP and ether extract at both measurement timess. The carcass studies were conducted on two birds per replicate (10 per treatment) at the end of both 3 and 5 wk. The dressing percentage, liver weight, heart weight, abdominal fat and the breast meat expressed as a percentage of live weight, did not differ significantly due to treatments at both phases. The serum cholesterol and high-density lipoprotein (HDL) showed a linear decrease (p = 0.0683 and p = 0.0322, respectively) as the level of supplementation increased at 3 wk; at 5 wk serum cholesterol, HDL and triglyceride levels decreased significantly showing a positive linear effect of lacquer on fat metabolism. The meat color values such as lightness, redness and yellowness did not reveal any significant trend. Overall, it could be concluded that lacquer supplementation at higher levels did not affect growth performance, but had a positive impact on fat metabolism by influencing fat digestibility and reducing serum cholesterol and triglyceride.

• 한국의학물리학회지:의학물리
• /
• 제28권3호
• /
• pp.106-110
• /
• 2017

The variable density phantom fabricated with varying the infill values of 3D printer to provide more accurate dose verification of radiation treatments. A total of 20 samples of rectangular shape were fabricated by using the $Finebot^{TM}$ (AnyWorks; Korea) Z420 model ($width{\times}length{\times}height=50mm{\times}50mm{\times}10mm$) varying the infill value from 5% to 100%. The samples were scanned with 1-mm thickness using a Philips Big Bore Brilliance CT Scanner (Philips Medical, Eindhoven, Netherlands). The average Hounsfield Unit (HU) measured by the region of interest (ROI) on the transversal CT images. The average HU and the infill values of the 3D printer measured through the 2D area profile measurement method exhibited a strong linear relationship (adjusted R-square=0.99563) in which the average HU changed from -926.8 to 36.7, while the infill values varied from 5% to 100%. This study showed the feasibility fabricating variable density phantoms using the 3D printer with FDM (Fused Deposition Modeling)-type and PLA (Poly Lactic Acid) materials.

• 한국해양학회지
• /
• 제25권2호
• /
• pp.62-73
• /
• 1990

장방형 단면의 개수로를 사용하여 정상 염수쇄기가 존재하는 흐름 장의 유동특성 을 파악하기 위한 실험을 수행하였다. 염수쇄기는 전체적으로 매우 안정하여 목시 관측이 용이하였으나, 유속의 측정과 계면파의 관측에는 가시화수법을 이용하였다. 연 직방향의 밀도변화로부터 정의되는 밀도계면은 목시관측에 의한 계면의 대략 0.5 cm정 도 아래에 존재하였으며, 밀도분포는 Hlomboe 모델을 잘 만족하였다. 계면층은 난류강 도 (turbulent intensity)가 매우 극심한 영역으로서 그 두께는 총평균 Richardson수 가 증가함에 따라 감소하는 경향을 보였으며 상층의 약 16% 정도의 크기를 가졌다. 수 로의 횡단면상의 유속분포는 수로측변에 의한 마찰의 영향을 잘 반영하였고, 상층내에 서는 Reyonolds수가 커질수록 연직방향의 유속분포의 균질성이 증가하는 반면 하층은 대체로 방물형(parabolic type)에 가까운 분포를 보였다. 염수쇄기를 쇄기장(L/SUB o/)에 따라 하구부(x/L/SUB o/< 0.3,단 x는 하구로부터의 거리), 중앙부(0.3 0.7) 의 세 구간으로 나누어 생각하는 경우, 연행계수는 중앙부에서 작고 하구부와 선단부에서 크게 나타났다. 또한 하구부나 중앙부는 계면이 대체로 안정하여 내부표면장력파가 팔생하거나 전파하는 반면, 선단부는 매우 불안정 하여 cusping ripple 또는 bursting ripple과 같은 계면파가 발생하였다. 염수쇄기의 형상은 거의 진선적으로, densimetric Froude 수와 Reynolds 수와는 독립이었다.

• 천문학회보
• /
• 제45권1호
• /
• pp.61.4-62
• /
• 2020

We present H I gas kinematics and star formation activities of NGC 6822, a dwarf galaxy located in the Local Volume at a distance of ~490 kpc. We perform profile decomposition of the line-of-sight velocity profiles of the high-resolution (~42.4" × 12") spatial; ~1.6 km/s spectral) H I data cube taken with the Australia Telescope Compact Array (ATCA). For this, we use a new tool, the so-called BAYGAUD (BAYesian GAUssian Decompositor) which is based on Bayesian Markov Chain Monte Carlo (MCMC) techniques, allowing us to decompose a line-of-sight velocity profile into an optimal number of Gaussian components in a quantitative manner. We classify the decomposed H I gas components of NGC 6822 into kinematically cold, warm or hot ones with respect to their velocity dispersion: 1) cold: < 4 km/s, 2) warm: 4 ~ 8 km/s, 3) hot: > 8 km/s. We then derive the Toomre-Q parameters of NGC 6822 using the kinematically decomposed H I gas maps. We also correlate their gas surface densities with the surface star formation rates derived using both GALEX far-ultraviolet and WISE 22 micron data to examine the impact of gas turbulence caused by stellar feedback on the Kennicutt-Schmidt (K-S) law. The kinematically cold component is likely to better follow the linear extension of the Kennicutt-Schmidt (K-S) law for molecular hydrogen (H2) at the low gas surface density regime where H I is not saturated.

• 치과방사선
• /
• 제29권2호
• /
• pp.397-405
• /
• 1999

Purpose: To clarify the usefulness and the limitation of Digora system/sup (R)/ by evaluating the physical characteristics as the quantitative image on Image Plate(Ip). Materials and Methods: Radiograms were taken by Heliodent MD(Siemens Co.. Germany) with the image plate for adult. Cu-step wedge as reference material. and three pieces of dry mandibular bone. Image analysis was performed by single color enhancement. density measurement with histogram. The relationship between the exposure conditions and the distribution of the pixel values of the image. the variation of pixel values of each step of Cu-step wedge at two different area and Cu-equivalent value of three pieces of dry mandibular bone measure by the conversion equation. Results: There was no linear relationship between the exposure condition and the average pixel value of the image. of which the distribution was not even. The pixel value differences between the center portion and the periphery were ranged from 60 to 70 in vertical plane and from 15 to 26 in horizontal plane. Two plot profile formed at two different areas of the Cu-step wedge were different. The measured Cu-equivalent values showed the discrepancy among the times of measurement. Conclusion: As above results. Image Plate(Ip) of Digora system/sup (R)/ showed the limitation as the quantitative image. The physical property of IP was expected to need to be compensated for the quantitative evaluation of the bone or others

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2342-2354
• /
• 2002

The present study has numerically predicted both the flow -induced and thermally-induced residual stresses and birefringence in injection o. injection/compression molded center -gated disks. Analysis system for entire molding process was developed based on an ap propriate physical modeling including a nonlinear viscoelastic fluid model, stress-optical law, a linear viscoelastic solid model, free volume theory for density relaxation phenomena and a photoviscoelasticity and so on. Part I presents physical modeling a nd typical numerical analysis results of residual stresses and birefringence in the injection molded center-gated disk. Thermal residual stress was found to be extensional near the center, compressive near the surface and tend to become toward tensional at the surface. A double-hump profile was obtained across the thickness in birefringence distribution: nonzero birefringence is found to be thermally induced, the outer peak is due to the shear flow and subsequent stress relaxation during the filling stage a nd the inner peak is due to the additional shear flow and stress relaxation during the packing stage. Predicted birefringence including both the flow -induced and thermally-induced one becomes quite similar to the experimental one.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권9호
• /
• pp.1292-1302
• /
• 2017

Objective: This experiment was conducted to investigate the influence of rapeseed meal (RSM) supplementation in weaning pig diet on growth performance, blood profile, carcass characteristics and economic analysis on weaning to finishing pigs. Methods: A total of 120 cross bred ([Yorkshire${\times}$Landrace]${\times}$Duroc) weaning pigs were allotted to 5 treatments in a randomized complete block design. Each treatment had 4 replications with 6 pigs per pen. Five different levels of RSM (0%, 2%, 4%, 6%, and 8%) were used as dietary treatments. Results: Overall, no treatment showed significant differences in growth performance with increased dietary RSM levels. The concentration of blood urea nitrogen (BUN) decreased as dietary RSM levels increased in 6 weeks (linear response, p<0.01). Total cholesterol, high density lipoprotein cholesterol, low density lipoprotein cholesterol, triiodothyronine, and thyroxine showed no significant differences, neither were there any significant differences in the immune response (IgG and IgA). As the dietary RSM levels of weaning pig diet were increased, no differences were found among dietary treatments upon performing proximate analyses of the pork after finishing. The influence of RSM supplementation on nutrient digestibility and nitrogen retention were not affected by dietary RSM levels either. With increased dietary RSM levels in the weaning pig diet, no differences among dietary treatments were found after performing proximate analyses of the pork's physiochemical properties. In addition, there were no significant differences observed in pork colors, pH levels, and economic benefits. Conclusion: Consequently, this experiment demonstrated that weaning pig's diet containing RSM influenced BUN concentration, but there were no detrimental effects on the growth performance of weaning pigs with up to 8% RSM in the diet.

• Radiation Oncology Journal
• /
• 제21권2호
• /
• pp.167-173
• /
• 2003

목적: 선형가속기를 이용한 정위방사선치료 시 GafChromic 필름을 이용하여 조사되는 선량 및 분포를 측정하고 치료 계획에서 계산된 선량분포와의 일치 여부를 평가하고자 하였다. 대상 및 방법: 두부 모형의 아크릴 팬텀을 제작하였는데, 팬텀 중심과 또 다른 두 지점에서 전리함을 삽입하거나, 임의 단면에서 필름을 삽입하여 절대선량 및 상대선량분포를 측정할 수 있도록 하였다. GafChromic 필름(MD-55-2, Nuclear Associate, USA)을 폴리스티렌 고체 팬텀 깊이 5 cm에 삽입하여 6 MV 광자선, 0$\~$l12 Gy 선량으로 조사하고, Digitizer를 이용하여 흑화도(Optical density: OD)를 측정하였다. 본원에서 개발한 정위방사선 치료계획시스템 'Linapel'을 이용하여 두부 모형의 아크릴 팬텀의 중심점(Isocenter of Target)을 대상으로, 각각의 빔에 300 cGy 선량이 조사되도록 5 arc 빔 치료계획을 시행하였다. 필름선량측정시스템(RIT113 프로그램)을 이용하여 5 arc 빔 전체가 조사된 GafChromic 필름의 상대선량분포를 측정하고 치료계획에서 계산된 선량분포와 비교하였다. 결과: MD-55-2 GafChromic필름에 대한 흑화도는 조사된 선량에 대하여 선형성을 가지고 있음을 확인하였다. 깊이 변화에 대한 선량 값의 변화와 빔의 횡축에 대한 빔 측면상(profile)도 GafChromic 필름을 이용하여 측정할 수 있었다. 치료계획시스템 'Linapel'을 이용한 치료계획의 선량 계산 값과 측정에서 얻은 절대선량 값을 비교하면 오차범위가 $\pm$3$\%$ 이내에 있음을 확인하였다. GafChromic 필름의 실제 조사된 상대선량분포도를 치료 계획에서 결정된 선량분포도와 비교하면 50$\~$90$\%$에 대하여 $\pm$1 mm의 차이를 가지고 있음을 확인할 수 있었다. 결론: 본 연구를 통하여 GafChromic 필름은 절대선량과 상대선량분포를 측정할 수 있다는 것을 확인시켜 줌으로써, 선형가속기를 이용하는 정위방사선치료에서 치료 전에 선량측정을 위한 방법으로 믿을 만한 정보를 제공할 수 있는 방법으로 생각된다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.82-82
• /
• 2003

It is well known that electromagnetic (EM) waves are mode converted to electrostatic (ES) waves in inhomogeneous plasmas. We examine this issue in a three-dimensional multi-fluid numerical model. First, we derive a set of coupled linear wave equations when a one-dimensional inhomogeneous density profile is assumed in a cold and collisionless plasma. The massive ions are considered as fixed because we are interested in high frequency waves in plasmas. It is shown that the EM mode satisfies the 0th order modified Bessel equation near the resonant region where the frequency matches the local electron plasma frequency. It is expected that the EM waves are coupled and damped to the ES waves owing to the logarithmic singular behavior at such resonances. Second, we numerically test the same case in a 3-D multi-fluid model. An impulsive input is assumed to excite EM waves in the inhomogeneous 3-D box model. The wave spectra of electric and magnetic fields are presented and compared with the analytical results. Our results suggest that the EM energy is irreversibly converted into the ES energy wherever the resonant condition is satisfied. Finally we discuss how the mode conversion appears in both electric and magnetic fields by analyzing time histories of each component. We also compare our results with MHD wave coupling. It is numerically confirmed in this study that the coupling of EM and ES waves is similar to that of compressional and transverse MHD waves.