• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.859-870
• /
• 2000

In this paper, an efficient H/W implementation technique for guard interval in OFDM(Orthogonal Frequency Division Multiplexing) systems is proposed and applied to ASIC chip design of an OFDM-based 25 Mbps wireless ATM modem. In OFDM systems, a cyclic prefix, longer than the largest multipath delay spread, is usually inserted to maintain the orthogonality of subchannels, by making the linear convolution of the channel ok like circular convolution inherent to the discreate Fourier domain, as well as to prevent the ISI(Intersymbol Interference) within the OFDM block. However, the OFDM system using the cyclic prefix requires an additional H/W in transmitter in order to store the original samples and to append the cyclic prefix to the beginning of each block. In this paper, a new approach using a cyclic prefix, even with a significantly lower H/W complexity. Finally, the performance of the proposed approach is demonstrated by applying it to ASIC chip design of an OFDM-based 25 Mbps wireless ATM modem.

• Journal of Korea Society of Industrial Information Systems
• /
• v.1 no.1
• /
• pp.29-62
• /
• 1996

In this paper, the problem of determining cyclic schedules for a material handling hoist in the printed-circuit-board(PCB) electroplating line is considered. The objective of this research is to determine an optimal simple-cycle schedule of the hoist which in turn maximizes the line throughput rate. Previous approaches to the cyclic hoist scheduling problem are all mathematical programming-based approaches to develop cyclic schedules(Mixed Integer Programming, Linear Programming based Branch and Bound, Branch and Bound Search Method and so on). In this paper, a genetic algorithm-based approach for a single hoist scheduling in the PCB electroplating line is described. Through some experiments for the well known example data and randomly generated data, the proposed algorithm is shown to be more efficient than the previous mathematical programming-based algorithm.

• Journal of Korean Association for Spatial Structures
• /
• v.24 no.1
• /
• pp.73-80
• /
• 2024

Non-uniform reinforced concrete brace facade systems are newly considered to improve seismic performance of reinforced concrete frame buildings under lateral load. For normal and high strength concrete of 30MPa, 80MPa, and 120MPa, the cross-sections of reinforced concrete brace facade systems were designed as different size with same amount of reinforcements. The strengthened frame systems were analyzed by a non-linear two-dimensional finite element technique which was considering material non-linearities of concrete and reinforcing bars under monotonic and cyclic loadings. From the study of non-linear analysis of the systems, therefore, it was provided that the proposed braced facade systems were reliable to improve laterally load-carrying capacity and minimize damages of concrete members through comparisons of load-displacement curves, crack patterns, and stress distributions of reinforcing bars predicted by current non-linear finite element analysis of frame specimens.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.467-470
• /
• 2013

We propose a blind feedforward phase noise mitigation method in the time-domain for a coherent optical orthogonal frequency division multiplexing (CO-OFDM) systems. By exploiting the redundancy of the cyclic prefix (CP), the proposed scheme acquires the overall phase noise difference information during an OFDM block and attempts to mitigate the phase noise in the time domain using a linear approximation. The proposed algorithm mitigates common phase error (CPE) and inter-carrier-interference (ICI) due to phase noise simultaneously, improving the system performance, especially when decision-directed equalizers are used. The simulation results demonstrate the effectiveness of the proposed feedforward phase noise mitigation approach in time domain.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.179-184
• /
• 2006

An intuitive understanding of the dynamic pattern generation in asymmetric networks may be considered an essential component in developing models for the dynamic information processing. It has been reported that the neural network with cyclic connections generates multiple limit cycles. The dynamics of discrete time network with cyclic connections has been investigated intensively. However, the dynamics of a cyclic connection neural network in continuous-time has not been well-known due to the considerable complexity involved in its calculation. In this paper, the dynamic behavior of a continuous-time cyclic connection neural network, in which each neuron is connected only to its nearest neurons with binary synaptic weights of ${\pm}1$, has been investigated. Furthermore, the dynamics and stability of the network have been analyzed using a piece-wise linear approximation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.11
• /
• pp.840-845
• /
• 2014

Vibration profiles consist of two kinds of pattern, random and harmonic, at general engineering problems and the detailed vibration test mode of a target system is decided by the spectral condition that is exposed under operation. In moving mobility, random responses come generally from road source; whereas the harmonic responses are triggered from rotating machinery parts, such as combustion engine or drive shaft. Different spectral input may accumulate different damage in frequency domain since the accumulated fatigue damage dependent on the pattern of input spectrum in high cyclic loading condition. To evaluate the sensitivity of spectral damage according to different loading conditions, a linear elastic system is introduced to conduct a uniaxial vibration testing. Measured data, acceleration and strain, is analyzed using energy isocline function and then, the calculated fatigue damage is compared by different loading cases, random and harmonic.

• ETRI Journal
• /
• v.32 no.4
• /
• pp.588-595
• /
• 2010

This paper proposes encoding and decoding for nonlinear product codes and investigates the performance of nonlinear product codes. The proposed nonlinear product codes are constructed as N-dimensional product codes where the constituent codes are nonlinear binary codes derived from the linear codes over higher order alphabets, for example, Preparata or Kerdock codes. The performance and the complexity of the proposed construction are evaluated using the well-known nonlinear Nordstrom-Robinson code, which is presented in the generalized array code format with a low complexity trellis. The proposed construction shows the additional coding gain, reduced error floor, and lower implementation complexity. The (64, 24, 12) nonlinear binary product code has an effective gain of about 2.5 dB and 1 dB gain at a BER of $10^{-6}$ when compared to the (64, 15, 16) linear product code and the (64, 24, 10) linear product code, respectively. The (256, 64, 36) nonlinear binary product code composed of two Nordstrom-Robinson codes has an effective gain of about 0.7 dB at a BER of $10^{-5}$ when compared to the (256, 64, 25) linear product code composed of two (16, 8, 5) quasi-cyclic codes.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.489-496
• /
• 2000

Several culture systems including batch, two-stage CSTR, semi-fed batch, and two-stage cyclic fed-batch were investigated for the efficient production of the Fab fraction of PDC-E2 specific human monoclonal antibody using high cell density recombinant E. coli. A two-phase batch system and a two-stage continuous system were examined to overcome plasmid instability problems, by separating the growth and the production stages. The cell density and productivity of the two-stage continuous culture was better than that of the two-phase batch fermentation. In the two-stage continuous culture system with DO-stat, the cell growth and the productivity were superior to those of the system without the DO control. Also, almost total plasmid stability was maintained in the two-stage continuous culture system. Modified M9 medium was selected as an optimum feeding medium for the fed-batch process, and the optimum C/N ratio determined to be 2:3. The optimum feeding rate was $0.6g/\ell/hr$ for a constant feeding strategy in semi-fed batch system. When the feeding medium was fed by pulsing, it was observed that more frequent pulsing resulted in improved cell growth. The linear feeding method was the most efficient of the various feeding methods tested. Finally, high cell density culture using a two-stage cyclic fed batch system with pH-stat was tried because the linear feeding method showed limitations in terms of obtaining high cell densities, and a cell density of $54 g/\ell$ was achieved. It was concluded that the two-stage cyclic fed batch system was the most efficient system for high cell density culture of the systems tested. However, productivity improvements were lower than expected due to the extremely high accumulations of acetate, although the low levels of residual glucose were maintained.

• The Korean Journal of Physiology
• /
• v.26 no.1
• /
• pp.15-25
• /
• 1992

In order to elucidate the properties of the background current whole cell patch clamp studies were performed in rabbit ventricular cells. Ramp pulses of ${\pm}80\;mV$ from holding potential of 40 mV(or 20 mV) at the speed of 0.8 V/sec were given every 30 sec(or 10 sec) and current-voltage diagrams(I-V curve) were obtained. For the activation of the background current isoprenaline, adenosine 3',5'-cyclic monophosphate(dBcAMP), guanosine 3',5'-cyclic monophosphate(cGMP), and $N^6$-2'-o-dibutyryladenosine 3',5'-cyclic monophosphate(dBcAMP) were applied after all known current systems were blocked with 2mM Ba, 1 mM Cd ,5 mM Ni, 10 ${\mu}M$ diltiazem, 10 ${\mu}m$ ouabain, and 20 mM tetraethylammonium(TEA). The conductance of background current in control was $0.65{\pm}0.69$ nS at 0 mV, its I-V curves was almost linear and reversed near 50 mV. When there was no taurine in pipette solution, isoprenaline hardly activated the background current but when taurine existed in pipette solution, isoprenaline activated the larger background current. Cyclic AMP or cyclic GMP alone had little effect on the activation of the background current, while cGMP potentiated cGMP effect. When the background current was activated with cGMP and cAMP, isoprenaline could not further increased the background current. The background current activated by isoprenaline depended on extracellular $Cl^-$ concentration and its reversal potential was shifted according to chloride equilibrium potential. The change of extracellular $Na+$ concentration had little effect on reversal potential of the background current activated by isoprenaline.

• Computers and Concrete
• /
• v.23 no.2
• /
• pp.81-95
• /
• 2019

The unexpected seismic interaction of dry-assembled precast concrete frame structures typical of the European heritage with their precast cladding panels brought to extensive failures of the panels during recent earthquakes due to the inadequateness of their connection systems. Following this recognition, an experimental campaign of cyclic and pseudo-dynamic tests has been performed at ELSA laboratory of the Joint Research Centre of the European Commission on a full-scale prototype of precast structure with vertical and horizontal cladding panels within the framework of the Safecladding project. The panels were connected to the frame structure by means of innovative arrangements of fastening systems including isostatic, integrated and dissipative. Many of the investigated configurations involved a strong frame-cladding interaction, modifying the structural behaviour of the frame turning it into highly non-linear since small deformation. In such cases, properly modelling the connections becomes fundamental in the framework of a design by non-linear dynamic analysis. This paper presents the peculiarities of the numerical models of precast frame structures equipped with the various cladding connection systems which have been set to predict and simulate the experimental results from pseudo-dynamic tests. The comparison allows to validate the structural models and to derive recommendations for a proper modelling of the different types of existing and innovative cladding connection systems.