• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권10호
• /
• pp.491-500
• /
• 2003

Most of the loads in industrial power distribution systems are balanced and connected to three wires power systems. However, in the user power distribution systems, most of the loads are single & three phase and unbalanced, generating a large amount of non-characteristic harmonics. With the advent of power electronics and proliferation of non-linear loads in industrial power applications, power harmonics and their effects on power quality are a topic of concern. Harmonics by the unbalance voltage and non-linear loads, cause the increase of machine loss and heating. In order to allow current harmonic compensation, a filter must be installed. This paper describes the performance of passive filter under the voltage unbalance and non-linear load.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.304-312
• /
• 2022

Digital images of cultural relics captured using line scan cameras present limitations due to uneven intensity and low contrast. To address this issue, this report proposes a colour linear array image enhancement method that can maintain a constant colour. First, the colour linear array image is converted from the red-green-blue (RGB) colour space into the hue-saturation-intensity colour space, and the three components of hue, saturation, and intensity are separated. Subsequently, the hue and saturation components are held constant while the intensity component is processed using the established intensity compensation model to eliminate the uneven intensity of the image. On this basis, the contrast of the intensity component is enhanced using an improved local contrast enhancement method. Finally, the processed image is converted into the RGB colour space. The experimental results indicate that the proposed method can significantly improve the visual effect of colour linear array images. Moreover, the objective quality evaluation parameters are improved compared to those determined using existing methods.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.161-162
• /
• 2012

• 대한방사선과학회:학술대회논문집
• /
• 대한방사선과학회 1999년도 추계학술대회
• /
• pp.74.1-74.1
• /
• 1999

• 제어로봇시스템학회논문지
• /
• 제19권4호
• /
• pp.285-289
• /
• 2013

In switching from the track-seeking or track-jumping control mode to track-following control mode in hard disk drives or optical disk drives, initial values of the feedback controller are tuned to improve the transient response. In general, all the initial values of the controller have been compensated for this purpose. In this paper, by partially compensating initial values of digital controllers, we achieve a good performance of the transient response. In the proposed method for IVC (Intial Value Compensation), LMIs (Linear Matrix Inequalities) are used, which includes conditions for improving the performance of the transient response such as reducing a tracking error and control efforts. We obtain optimal initial values of the controller by solving an optimization problem with constraints represented by only one LMI. Although initial values of the controller are partially compensated, we can show that not only a sufficient performance of the transient response is obtained but also control efforts are diminished. The feasibility of the method is verified by simulation studies.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.27-33
• /
• 2012

This paper presents the effect of temperature on the impedance-based damage monitoring of steel-bolt connections using wireless impedance sensor nodes. In order to achieve the objective, the following approaches are implemented. First, a temperature-compensated damage monitoring scheme that includes a temperature compensation model and damage detection method is described. The temperature compensation model is designed by analyzing the linear regressions between the temperatures and impedance signatures. The correlation coefficient of the impedance signatures is selected as the damage index to monitor the damage occurrence in the target structures. Second, a wireless impedance sensor node is described for the design of the hardware components and embedded software. Finally, the performance of the temperature-compensated impedance-based damage monitoring scheme is evaluated for detecting a loose bolt in the steel-bolt connections on a lab-scale steel girder under various temperatures.

• 전자공학회논문지S
• /
• 제36S권11호
• /
• pp.128-139
• /
• 1999

본 논문은 6-스텝까지 인버터의 선형제어영역을 넓히기 위한 공간전압 변조방법의 선형화 기법에 대해 제안하였다. 이 방법은 인버터에서 발생시키고자 하는 전압을 연속모드에서는 보상각을 얻기 위해서 6스텝 모드를 포함하는 불연속모드에서는 불연속 스위칭이 이루어지도록 하는 유지각을 얻기 위해서 퓨리에 급수를 이용하고 있다. 이 각들의 근사화 수식들을 과변조 영역에서 기본파 전압을 보상하기 위해 사용하였다. 따라서, PWM 인버터 출력전압의 최대 활용과 선형 제어를 이룰 수 있다.

• 대한전자공학회논문지SP
• /
• 제42권4호
• /
• pp.153-158
• /
• 2005

본 논문에서는 software defined radio(SDR) 등의 디지털 RF/IF(Intermediate Frequency)에 사용되는 CIC 필터의 처짐 현상을 위한 보상 필터를 제안한다. 제안된 보상 필터는 근사적 선형 위상 특성을 가지며, interpolator/decimator의 기저 대역에서 가장 낮은 레이트로 동작하는 2차의 필터이므로 저연산량을 요구하므로 비용 효율적이다. 또한 처짐 현상을 보상하면서도 저지대역에서는 성능 열화가 거의 발생하지 않는다 예제를 통한 설계 및 성능 분석 결과, 제안된 보상 방법을 적용한 통신 시스템에 있어서 성능 향상을 보였고, 기존의 보상 방법과 비교하여 성능 및 메모리 사용량, 연산량에서 우수함을 보였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1418-1425
• /
• 2014

In ultrasonic medical imaging, spatial compounding of images is a technique where ultrasonic beam is steered to examine patient tissues in multiple angles. In the conventional ultrasonic diagnostic imaging, the steering of the ultrasonic beam is achieved electronically using the phased array transducer elements. In this paper, a spatial compounding approach is presented where the ultrasonic probe element is rotated mechanically and the beam steering is achieved mechanically. In the spatial compounding, target position is computed using the value of the rotation axis and the transducer array angular position. However, in the process of the rotation mechanism construction and the control system there arises the inevitable uncertainties in these values. These geometric parameter errors result in the target position error, and the consequence is a blurry compounded image. In order to reduce these target position errors, we present a spatial compounding scheme where error correcting transformation matrices are computed and applied to the raw images before spatial compounding to reduce the blurriness in the compounded image. The proposed scheme is illustrated using phantom and live scan images of human knee, and it is shown that the blurriness is effectively reduced.

• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.208-215
• /
• 2007

The significant drawback of the permanent magnet linear synchronous motor (PMLSM) is force ripples, which are generated by the distortion of the stator flux linkage distributions, cogging forces caused by the interaction of the permanent magnet and the iron core and the end effects. This will deteriorate the performance of the drive system in high precision applications. The PMLSM and its parasitic effects are analyzed and modeled using the complex state-variable approach. To minimize the force ripple and realize the high precision control, the components of force ripples are extracted first and then compensated by injecting the instantaneous current to counteract the force ripples. And this method of the PMLSM system is realized by the field oriented control method. In order to verify the validity of this proposed method, the system simulations are carried out and the results are analyzed. The effectiveness of the proposed force ripples reduction method can be seen according to the comparison between the compensation and non-compensation cases.