• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.2
• /
• pp.187-193
• /
• 2014

As a result of the cost of grains, the replacement of grains by co-products (i.e. DDGS) in feedlot diets is a common practice. This change produces diets that contain a lower amount of starch and greater amount of fibre. Hypothetically, combining feed grade urea (U) with slow release urea (Optigen) in this type of diet should elicit a better synchrony between starch (high-rate of digestion) and fibre (low-rate of digestion) promoting a better microbial protein synthesis and ruminal digestion with increasing the digestible energy of the diet. Four cannulated Holstein steers ($213{\pm}4$ kg) were used in a $4{\times}4$ Latin square design to examine the combination of Optigen and U in a finishing diet containing different starch:acid detergent fibre ratios (S:F) on the characteristics of digestive function. Three S:F ratios (3.0, 4.5, and 6.0) were tested using a combination of U (0.80%) and Optigen (1.0%). Additionally, a treatment of 4.5 S:F ratio with urea (0.80% in ration) as the sole source of non-protein nitrogen was used to compare the effect of urea combination at same S:F ratio. The S:F ratio of the diet was manipulated by replacing the corn grain by dried distillers grain with solubles and roughage. Urea combination did not affect ruminal pH. The S:F ratio did not affect ruminal pH at 0 and 2 h post-feeding but, at 4 and 6 h, the ruminal pH decreased as the S:F ratio increased (linear, p<0.05). Ruminal digestion of OM, starch and feed N were not affected by urea combination or S:F ratio. The urea combination did not affect ADF ruminal digestion. ADF ruminal digestion decreased linearly (p = 0.02) as the S:F ratio increased. Compared to the urea treatment (p<0.05) and within the urea combination treatment (quadratic, p<0.01), the flow of microbial nitrogen (MN) to the small intestine and ruminal microbial efficiency were greater for the urea combination at a S:F ratio of 4.5. Irrespective of the S:F ratio, the urea combination improved (2.8%, p = 0.02) postruminal N digestion. As S:F ratio increased, OM digestion increased, but ADF total tract digestion decreased. The combination of urea at 4.5 S:F improved (2%, p = 0.04) the digestible energy (DE) more than expected. Combining urea and Optigen resulted in positive effects on the MN flow and DE of the diet, but apparently these advantages are observed only when there is a certain proportion of starch:ADF in the diet.

• The Korean Journal of Rheology
• /
• v.10 no.4
• /
• pp.195-201
• /
• 1998

We have studied the rheological and electrical properties of two types of electrorheological (ER) fluids based on semi-conductive polymers (poly(p-phenylene) and polyaniline). These semi-conductive polymer-based suspensions showed a dramatic increase in viscosity on the application of the static electric field due to the large value of conductivity ratio between particle and medium. The dynamic yield stresses of these ER suspensions exhibited a quadratic dependence on electric field strength at low electric fields and a linear one for high fields. They showed a maximum and then decreased with increasing bulk conductivity of particles. These yield stress behaviors under the static electric field were found to be closely related to the dielectric properties, which is in accord with Maxwell-Wagner interfacial polarization induced by the conductivity effects. In order to achieve better understanding of interfacial polarization effect on ER response and to improve the stability of ER suspension, different kinds of surfactants were employed for controlling the ER activity as well as for enhancing the colloidal stability of suspensions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1578-1586
• /
• 2010

This study estimated the effect of fermented persimmon (Diospros kaki L.) extract (FPE) supplement on feed intake, digestibility, nitrogen (N) balance, and rumen fermentation characteristics in sheep. Five male sheep (Corriedale${\times}$Polwarth) with average body weight of $48.6{\pm}1.3\;kg$ were housed in metabolism crates and assigned to a 5${\times}$5 Latin square design with five consecutive 20-d periods which consisted of 14-d adaptation and 6-d data collection. The sheep were fed ad libitum a diet containing concentrate and rice straw (3:7). The five treatments were FPE supplemented at 0 (Control), 5, 10, 20, and 30 g/kg of concentrate. Intakes of dry matter (DM, p<0.01), organic matter (OM, p<0.01), neutral detergent fiber (NDF, p<0.05), acid detergent fiber (ADF, p<0.05), and nitrogen-free extract (NFE, p<0.01) increased quadratically with increasing intake of FPE supplement and maximized (p<0.05) at 10 g/kg FPE. The digestibilities of DM (p<0.05), OM (p<0.05), crude protein (p<0.01), and NFE (p<0.01) increased quadratically with increasing amount of FPE supplement, and sheep fed 5 and 10 g/kg diets had greater (p<0.05) DM, OM, and NFE digestibilites than the Control treatment. By increasing FPE supplement concentration, N intake (p<0.01) and fecal N (p<0.05) increased linearly, whereas retained N (p<0.05) and retained N ratio (p<0.05) increased quadratically. The retained N was maximized (p<0.05) in sheep fed 5 and 10 g/kg diets. The mean rumen pH was not affected by FPE supplement, but there was a quadratic increase (p<0.05) of mean rumen ammonia N concentration and a linear increase (p<0.01) in mean rumen total volatile fatty acid (VFA) and acetate concentrations. The mean concentration of rumen propionate in sheep fed all FPE supplemented diets was greater (p<0.05) than the Control, but the mean ratios of rumen acetate to propionate in sheep fed 5 and 10 g/kg diets were lower (p<0.05) than that of Control sheep. In conclusion, FPE supplemented at 5-10 g/kg of concentrate improved feed intake, the digestibilites of OM and NFE, N metabolism, and rumen fermentation indices of sheep.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.182-189
• /
• 2005

This research was conducted to determine physical properties of four root media, peatmoss + vermiculite (1:1, v/v; PV), peatmoss + composted rice hall (1:1, PR), peatmoss + composted saw-dust (1:1 : PS) and peatmoss + composted pine bark (1:1 PB), as influenced by incorporation rate of Stock-sorb C (STSB). Each root medium containing STSB was packed in 22 cm diameter plastic pot and the physical properties were determined at 5 weeks after packing. As incorporation rate of STSB were elevated, total porosity increased in PV, PS and PB media with statistical differences at $5{\%}$ level. Those also resulted in increase of container capacity in PS and PB media, but statistical differences were not observed in PV and PR media. Elevated incorporation rate of STSB in PV, PS and PB media resulted in increase of air space with statistical differences. Trends in air space of the three root media showed a linear as well as quadratic responses to STSB contents of media. As incorporation rate of STSB increased, more water was retained in four root media at the soil moisture tension of 4.90 kPa, 9.81 kPa, 29.4 kPa and 1.5 MPa. The amount of water retained in PS medium was the highest at the moisture tension at 29.4 kPa and 1.5 MPa followed by PB, PR and PV medium. These results indicated that elevation of incorporation rate of STSB to various root media increased moisture retention capacity, but did not increase the available water holding capacity.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.190-195
• /
• 2005

This research was conducted to investigate the changes in soil chemical properties of root media as influenced by incorporation rate of a polyacryl amide hydrogel, Stocksorb C. The pH at 5 weeks after treatment in four root media such as peatmoss + vermiculite (1:1, v/v; PV), peatmoss + composted rice hull (1:1; PR), peatmoss + composted saw dust (1:1; PD) and peatmoss + composted pine bark (1:1; PB) containing STSB were in the range from 7.04 to 7.30, which was too high. Elevated incorporation rate of STSB resulted in increase of EC in soil solution of four root media with linear and quadratic response. The concentrations of $NH_4^+-N,\;NO_3^--N,\;PO_4-P^{3-},\;K^+,\;Ca^{2+}and\;Mg^{2+}$ in four kinds of root media increased as incorporation rates of STSB were elevated. But the $NO_3^-$-N concentrations in PS media were lower than those in other there root media tested. The Fe concentrations in PV, PR and PS media increased as incorporation rates of STSB were elevated, but those in PB medium did not show significant different. The concentrations of $Fe^{2+},\;Mn^{2+},\;Zn^{2+}and\;Cu^{2+}$ in PS media were higher than those in other three root media.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.1
• /
• pp.22-28
• /
• 2013

The objectives of this study were to develop porridge with medicinal herbs and chicken breast meat and to find out the optimum mixing ratio. Several herb extracts such as Acanthopanacis senticosus, Rehmannia glutinosa, Disocorea japonica, and Poria cocos Wolf were used in the ratio of 2, 1, 1, and 1, respectively. The optimum processing condition for herbal chicken porridge was determined by a design expert program. Seventeen experimental points were selected, and herb extracts (82~101 g), chicken breast meat (30~50 g), and glutinous rice (40~60 g) were chosen as the independent variables. The measured responses were preference of taste, DPPH radical scavenging, SOD-like activity, and cost. The optimum formulation of herbal chicken porridge using the numerical analysis was set at herbal extracts (101 g), chicken breast meat (38.66 g), and glutinous rice (41.34 g) with a 0.714 desirability value. DPPH radical scavenging effect, preference of taste and the cost showed a linear model, whereas SOD-like activity showed a quadratic model indicating a higher interaction among the mixture. As a result of proximate composition of optimized herbal chicken porridge, the contents of moisture, carbohydrate, crude protein, crude lipid, and ash contents were 76.4, 9.0, 1.4, 0.5, and 1.6%, the calories of the porridge was 46.1 kcal/100 g.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.4
• /
• pp.556-563
• /
• 2019

Objective: This experiment was conducted to investigate the effect of reducing dietary metabolic energy (ME) and crude protein (CP) levels on growth performance, blood profiles, and nutrient digestibility in weaning pigs. Methods: A total of 240 crossbred pigs ($Duroc{\times}[Landrace{\times}Yorkshire]$) with an average body weight of $8.67{\pm}1.13kg$ were used for a 6-week feeding trial. Experimental pigs were allotted to a $2{\times}3$ factorial arrangement using a randomized complete block design. The first factor was two levels of dietary ME density (low ME level, 13.40 MJ/kg or high ME level, 13.82 MJ/kg) and the second factor was three dietary CP levels based on subdivision of early and late weaning phases (low CP level, 19.7%/16.9%; middle CP level, 21.7%/18.9%; or high CP level, 23.7%/20.9%). Results: Over the entire experimental period, there were no significant difference in body weight among groups, but a decrease in diet energy level was associated with an increase in average daily feed intake (p = 0.02) and decrease in gain-feed ratio (G:F) ratio (p<0.01). Decreased CP levels in the diet were associated with a linear increase in average daily gain (p<0.05) and quadratic increase in G:F ratio (p<0.05). In the early weaning period, blood urea nitrogen concentration tended to increase when ME in the diet decreased and decrease when CP level in the diet decreased (p = 0.09, p<0.01, respectively). Total protein concentration tended to increase when CP level was reduced (p = 0.08). In the late weaning period, blood urea nitrogen concentration decreased linearly as CP level decreased (p<0.01). The CP and crude fat digestibility decreased when ME was decreased by 0.42 MJ/kg (p = 0.05, p = 0.01, respectively). The CP digestibility increased linearly as CP level decreased (p = 0.01). Conclusion: A weaning pig diet containing high ME level (13.82 MJ/kg) and low CP level (19.7%/16.9%) can improve pig growth performance and nutrient digestibility.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.9
• /
• pp.917-925
• /
• 2006

The aim of our research was to apply experimental design methodology in the optimization of photocatalytic degradation of azo dye(Reactive orange 16). The reactions were mathematically described as a function of parameters amount of $TiO_2(x_1)$, and dye concentration($x_2$) being modeled by the use of the Box-Behnken method. The results show that the responses of color removal(%)($Y_1$) in photocatalysis of dyes were significantly affected by the synergistic effect of linear term of $TiO_2(x_1)$ and dye concentration($x_2$). Significant factors and synergistic effects for the $COD_{Cr}$, removal(%)($Y_2$) were the linear term of $TiO_2(x_1)$ and dye concentration($x_2$). However, the quadratic term of $TiO_2(x_1^2)$ and dye concentration($x_2^2$) had an antagonistic effect on $Y_1$ and $Y_2$ responses. Canonical analysis indicates that the stationary point was a saddle point for $Y_1$ and $Y_2$, respectively. The estimated ridge of maximum responses and optimal conditions for $Y_1:(X_1,\;X_2)$=(1.11 g/L, 51.2 mg/L) and $Y_2:(X_1,\;X_2)$=(1.42 g/L, 72.83 mg/L) using canonical analysis was 93% and 73%, respectively.