• 대한전기학회논문지:전력기술부문A
• /
• 제52권7호
• /
• pp.421-428
• /
• 2003

After the cable is installed, many geometric factors, such as bowing types of the cable and the length difference of the cable between each minor section will cause the impedance unbalance between cables. The impedance unbalance will increase or decrease the sheath circulating currents, which are critical to human safety and sustaining the capabilities of electric power. Accordingly, in this paper, a new method is also proposed to reduce the sheath circulating currents and an reduction equipment according to the theory of the new method is developed. The reduction equipment is tested when the cable is on service. The test results show that it can reduce the sheath circulating currents by up to 97.8［%］. This confirms the validation of the new method and the reduction equipment, and assures the safe operation of the transmission cables. In order to illustrate the safe operation of the cable with new current reduction equipment at transient state due to lightning and single line-to-ground fault, extensive simulations have been made. Then the protection scheme of sheath circulating currents reduction equipment is proposed by adopting the new device of RDP(Reduction Device Protector).

• International Journal of Control, Automation, and Systems
• /
• 제6권4호
• /
• pp.506-514
• /
• 2008

This paper presents an intelligent model; named as free model, approach for a closed-loop system identification using input and output data and its application to design a power system stabilizer (PSS). The free model concept is introduced as an alternative intelligent system technique to design a controller for such dynamic system, which is complex, difficult to know, or unknown, with input and output data only, and it does not require the detail knowledge of mathematical model for the system. In the free model, the data used has incremental forms using backward difference operators. The parameters of the free model can be obtained by simultaneous perturbation stochastic approximation (SPSA) method. A linear transformation is introduced to convert the free model into a linear model so that a conventional linear controller design method can be applied. In this paper, the feasibility of the proposed method is demonstrated in a one-machine infinite bus power system. The linear quadratic regulator (LQR) method is applied to the free model to design a PSS for the system, and compared with the conventional PSS. The proposed SPSA-based LQR controller is robust in different loading conditions and system failures such as the outage of a major transmission line or a three phase to ground fault which causes the change of the system structure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1307-1316
• /
• 2009

In this case, powerfulness quorum of destruction side which we have expected are supposed general limit value for rock floor when retaining of earth on the section of rock floor in the urban area. For digging in the urban area, there are a lot of dislocations to be disadvantage for safety of digging ants. The displacement of the pondside didn't converged with the phase of the excavation. Also, the speed of displacement got higher than the percentages of risk in the construction. So, we put into operation Face mapping for checking special quality of dislocations which appear on the digging ants. This results were used to decide a destruction in the case of the final excavation by analyzing with other results. It was possible to know the unstable distribution of a fault line in Face Mapping and to get powerful lens of a surface of discontinuity by tests indoors and outdoors. The results were also used to make a solution. Therefore, It's a successful example using the Partial TopDown for stable digging. And it is important that Face Mapping have to be practiced for solving the uncertainty of ground organization when digging design in the urban city.

• 지구물리
• /
• 제2권1호
• /
• pp.45-56
• /
• 1999

경북 포항시 일월동 지역에서 482 m 길이의 동서 방향의 측선에 대한 탄성파 굴절법 및 반사법탐사를 실시하였다. 자료수집에서 지오폰 간격과 오프셋은 각각 2 m로 설정하였으며, 발파는 끝점 발파 배열 방법을 이용하여 한 발파점마다 24채널을 기록하였다. 발파 간격은 2 m로 하여 측선의 전구간에서 탄성파 자료를 취득하였다. 굴절법탐사 자료의 해석은 수평다층구조 이론을 적용하여 실시하였으며, 반사파 자료 처리는 트레이스 편집, 이득조절, 공심점 분류, 수직경로시차 보정, 뮤트 과정을 거친 후 동일 오프셋 모음을 취하여 단일중첩 탄성파 단면을 작성하고 필터링을 거친 후 해석에 이용하였다. 굴절법탐사 자료 해석결과 조사 측선 구간의 천부지반은 크게 2층으로 구분되는데, 상부층은 267∼566 m/s 의 P파 속도 분포를 보여 대체로 미고결 퇴적층이며, 하부층은 1096∼3108 m/s 의 P파 속도 분포를 보여 풍화암∼경암의 암반으로 구성되었음을 알 수 있다. 상부 미고결층은 수평적으로 큰 변화를 보이고 있는 바, 측선의 동측 구간에는 평균 400 m/s 의 P파 속도를 보이는 미고결 사암층이 3∼5 m 두께로 발달되어 있으며, 측선의 서측 구간은 평균 340 m/s 의 P파 속도를 갖는 매립토층이 8∼10 m 두께로 발달된 것으로 해석된다. 반사파 단면도에서 조사구간에 3개의 고각의 단층대가 분포하며, 이들 단층대를 경계로 기반암이 나누어져 있으며 단층대 사이의 구간은 비교적 안정된 지반으로 해석된다. 대형 건물의 위치는 단층대를 피하여 안정된 지반 구간에 위치해야 함을 고려할 때, 그 기초를 3∼10 m 깊이 하부에 위치하는 기반암 내에 설치되도록 설계되어야 할 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.219-221
• /
• 1999

HVDC(High Voltage Direct Current) transmission system was constructed between Cheju island and mainland Haenam and has been operating commercially since 1998. But research activities in this area are not so much. That is caused by the facts that HVDC is large scale system and it is not so easy to implement and to test. Though such simulation tools as RTDS(Real Time Digital Simulator) and EMTDC can be useful, these have limitations for actual control and protective system design. Therefore scaled-down HVDC model was developed for the purpose of researches at operating technique, control and protection methods. The design of this model was based on real Cheju-Haenam HVDC system. And additionally faults simulator such as ground fault, short-circuit and change of impedance in transmission line is equipped for analysis of these faults. Control system of the model was implemented fully digitally. So it is very easy for the researchers to develope control and protection algorithm and to test the performance.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.55-59
• /
• 2018

Currently, the development of industry makes needs larger electric supply. Providers must consider the efficiency about losses and reliability of the system. In this case, DC power system can save electrical energy; long-distance transmission line losses. Relevance to switch technology with a voltage-source converter (VSC) in AC-DC conversion system have been researched. But, protection device of DC-link against fault current is still needed to study much. VSC DC power system is vulnerable to DC-cable short-circuit and ground faults, because DC-link has a huge size of capacitor filter which releases extremely large current during DC faults. Furthermore, DC has a fatal flaw that current zero crossing is nonexistence. To interrupt the DC, several methods which make a zero crossing is used; parallel connecting self-excited series LC circuit with main switch, LC circuit with power electronic device called hybrid DC circuit breaker. Meanwhile, self-excited oscillator needs a huge size capacitor that produces big oscillation current which makes zero crossing. This capacitor has a quite effective on the price of DCCB. In this paper, hybrid self-excited type superconducting DCCB which are using AC circuit breaker system is studied by simulation tool PSCAD/EMTDC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 학술대회 논문집 전문대학교육위원
• /
• pp.185-190
• /
• 2006

Frequency and phasor are the most important quantities in power system operation because they can reflect the whole power system situation. Frequency reflects the dynamic energy balance between load and generating power, while operators use phasor to constitute the state of system and, moreover, phasor based line relays are currently used in most power systems. So frequency and phasor are regarded as indices for the operating power systems in practice. The proposed technique is suitable for estimation near-nominal, nomina), and off-nominal frequencies. It is useful in designing microprocessor-based relays and meters that need to measure power system frequency. Performance test results, using signals from EMTP source and Excel program, indicate that the proposed technique can provide accurate estimates within 16ms. Maximum estimation errors observed during testing are of the order of 0.006Hz for nominal, near-nominal, and off-nominal frequencies. The proposed technique provides accurate estimates in presence of noise and harmonics and in case ground fault. The rate change of the phase angle is used for estimation. To confirm the validity of the proposed algorithm, the simulation studies carried out on a typical 154[KV] double T/L system by using EMTP software. Some test results are presented in the paper.

• 한국화재소방학회논문지
• /
• 제34권3호
• /
• pp.43-48
• /
• 2020

본 연구에서는 누전경보 기능이 내장된 누전경보차단기(JER-E2S, ETECKOREA Co., Korea)를 개발하고, 그 특성을 분석하였다. 개발된 누전경보차단기는 단상 220 V 전용으로 정격전류는 32 A, 20 A, 20 A(화장실용), 16 A 등이다. JER-E2S는 기존 누전차단기(ELB)의 특성을 모두 만족하고 있으며, 13 ± 2 mA의 저항성누설전류(Igr)인 화재전류가 전선로에 흐르면 실시간 검출하여 LED 램프로 위험 상태를 점멸할 수 있는 제품이다. 개발된 누전경보차단기는 LED 램프 및 통신기기 등에서 필연적으로 발생되는 용량성누설전류(Igc)에 대한 내성이 있어서 안정적인 전기 공급이 가능하다. 또한, 누전경보차단기는 순간지락 정전보호 기능이 있어서 작은 물방울 및 나뭇잎 등의 순간지락에 따른 차단기의 오동작 없이 전원 공급이 가능하다. 그리고 개발된 누전경보차단기의 대기전력은 0.1 W 이하로 기존 ELB에 비해 절전 성능이 3~8배 우수한 특성을 나타냈으며, 일반 120 ㎡의 아파트 1 세대에 10개 정도의 누전경보차단기가 설치되었을 때 1 개월에 2~5 kWh의 전기를 절감할 수 있다. 개발된 누전경보차단기는 기존 누전차단기의 특성을 만족할 뿐만 아니라 전기화재 예방기능 및 오동작 방지기능이 있어서 전원 품질이 우수하고, 전기화재 예방에 혁신적으로 기여할 수 있는 제품이다.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.271-278
• /
• 2006

This paper scrutinized the damping effects of installing the prototype PSSs by a transient analysis for eight buses of faults in the South Korean power system. The PSSs used have the co-PSS blocks for IEEEST model with a single input and the co+power PSS blocks for PSS2A model with dual inputs. The simulation tool was a TSAT(Transient Security Assessment Tool) developed by Powertech Labs Inc. The voltages of the transmission line for simulations were 765kV and 345kV, and the faults for eight cases were sequenced by considering the open state and the close state of the lines. In the simulations, the three-phase line to ground (L-G) fault generated different points for each region. The simulations were compared to the cases of no PSS, partial IEEEST and PSS2A, absolute IEEEST, and absolute PSS2A to show that the power system oscillation can be effectively damped by PSS modules. Simulations were conducted to confirm the effectiveness for the KEPCO (Korea Electric Power Corporation) power system.

• 지질공학
• /
• 제3권3호
• /
• pp.279-293
• /
• 1993

최근, 우리나라에서는 지반변형에 기인된 인공구조물의 대형 붕괴사고가 빈번했으며, 뿐만 아니라 산사태, 단층의 활동성 여부에 대한 논란 등 자연적 지반변형도 중요한 문제로 대두되고 있다. 본 연구에서는 천부지반의 한 기준면의 2 - 축 틸트변화를 6개월간 연속관측하고 그 자료를 처리 분석함으로써 천부지반의 변형으로 부터 야기될 수 있는 재해의 사전 예방기술을 마련할 목적으로 수행되었다. 연구소 부지내, 산사면에 설치한 2 - 축 틸트 센서를 이용하여 0.0001 arc.sec의 정밀도로 매 10분 마다 측정된 관측자료는 센서위치로 부터 200m 유선연결된 연구실 내 PC에 interface를 통하여 실시간으로 기록 저장된다. 관측한 계수형 2 - 축 틸트자료는 공학적 활용을 염두에 두고 관련 기상자료들과 함께 처리 분석되었다. 6개월 간의 2 - 축 틸트 관측기간 중, 순(net) 틸트는 서쪽으로 10.06arc.sec, 남쪽으로 73.88arc.sec를 나타냄으로써 $S7.75^{\circ}W$ 방향으로 74.56arc.sec 기울어, 시간 당 평균 0.02arc.sec의 틸팅을 하였다. 관측위치에서의 지반이 이와 같이 빠르고 큰 틸팅을 하였음에도 불구하고 동-서 및 남-북성분의 틸트가 모두 일정한 값에 수렴해 가는 추세에 있으므로 본 위치는 공학적으로 안전한 것으로 판단하였다. 본 연구를 통하여 지표 경사방향 및 pore pressure 증가방향으로 분류되는 대, 소의 변형 event들과 강우와의 관련성을 확인하였으며, 대기 온도변화의 영향에 의한 2-축 틸트 일변화는 온도변화에 평균 4.3시간 지연되어 나타나는 사실과, 대기압 변화와 변형과의 상관관계의 가능성 등도 제시하였다.