• Journal of Advanced Marine Engineering and Technology
• /
• 제12권4호
• /
• pp.32-45
• /
• 1988

The scanning moire method, in which the master grating is replaced by the scanning line of television camera and in which the moire pattern is obtained by thining out some scanning line, is discussed by the sampling theory. It is determined also by the sampling theory that relationship between the fringe pattern. The programs that analyze the strain by the scanning moire method have been developed. For the simulation model in which we are able to calculate analytically the distribution of strains, the scanning moire method is discussed. It is shown that the small strains and the large strains are analyzed from the same picture by the thinning out technique and that the accuracy of analysis is improved by change of the phase in the thinning out technique.

• 한국광학회지
• /
• 제18권4호
• /
• pp.274-279
• /
• 2007

광간섭 단층촬영(OCT)용으로 원통형 압전소자(PZT)와 단일모드 광섬유를 이용한 광경로 지연기를 제작하여 정현파로 구동하고 특성을 분석하였다. 제작한 OCT 시스템은 검침단과 기준단을 대칭 구동하는 이중 광경로 지연방식을 사용하였다. 정현파 구동을 통한 PZT 광경로 지연 방식은 삼각파 구동과 비교하여 입력파형의 첨두 부분에서의 비선형현상을 제거하여 높은 반복성을 나타냄을 보였고, 삼각파 구동으로는 불가능했던 부분을 영상화 할 수 있었다.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1280-1287
• /
• 2002

The old technique of sandblasting which has been used for decoration of glass surface has recently been developed into a powder blasting technique for brittle materials such as glass, silicon and ceramics, capable of producing micro structures larger than $100{\mu}$ m. This paper describes the performance of powder blasting technique in micro-line grooving of glass and the effect of the number of nozzle scanning on the depth and width of line groove. Experimental results showed that increasing the no. of nozzle scanning resulted in the increase of depth and width in grooves. Increase of width which may cause several problems in the precision machining results from wear of mask film. Therefore, well-controlled masking process is the most important factor for micro machining of glass with accuracy.

• 한국가시화정보학회지
• /
• 제11권2호
• /
• pp.41-45
• /
• 2013

Two-photon microscopy (TPM) is minimally-invasive 3D fluorescence microscopy based on nonlinear excitation, and TPM can visualize cellular structures based on auto-fluorescence. Line-scanning TPM is one of high-speed TPM methods without sacrificing the image resolution by using spatial and temporal focusing. In this paper, we developed line-scanning TPM based on spatial and temporal focusing for auto-fluorescence imaging by exciting the tryptophan. Laser source for this system was an optical parametric oscillator (OPO) and it made near 570 nm femtosecond pulse laser. It had 200fs pulse width and 1.72 nm bandwidth, so that the achievable depth resolution was 2.41um and field of view (FOV) is 10.8um. From the characterization, our system has 3.0 um depth resolution and 12.3 um FOV. We visualized fixed leukocyte cell sample and compared with point scanning system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.99.1-99
• /
• 2002

In this paper, a computer-vision based pipe-inspection algorithm is developed. The algorithm uses the modified Hough transformation and a line-scanning approach to identify the edge line and radius of the pipe image, from which the eccentricity and dimension of the pipe-end is calculated. Line and circle detection was performed using Laplacian operator with input image which are acquired from the front and side cameras. In order to minimize the memory usage and the processing time, a clustering method with the modified Hough transformation for line detection. The dimension of inner and outer radius of pipe is calculated by proposed line-scanning method. The method scans several lines along t...

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.946-950
• /
• 2003

In this paper, a computer-vision based pipe shape inspection algorithm is developed. The algorithm uses the modified Hough transformation and a line-scanning approach to identify the edge line and radius of the pipe image, from which the eccentricity and dimension of the pipe-end is calculated. Line and circle detection was performed using Laplace operator with input image, which are acquired from the front and side cameras. In order to minimize the memory usage and the processing time, a clustering method with the modified Hough transformation for line detection. The dimension of inner and outer radius of pipe is calculated by proposed line-scanning method. The method scans several lines along the X and Y axes, calculating the eccentricity of inner and outer circle. by which pipes with wrong end-shape can be classified removed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.521-525
• /
• 2002

In this paper, a computer-vision based pipe-inspection algorithm is developed. The algorithm uses the modified Hough transformation and a line-scanning approach to identify the edge line and radius of the pipe image, from which the eccentricity and dimension of the pipe-end is calculated. Line and circle detection was performed using Laplace operator with input image, which are acquired from the front and side cameras. In order to minimize the memory usage and the processing time, a clustering method with the modified Hough transformation for line detection. The dimension of inner and outer radius of pipe is calculated by proposed line-scanning method. The method scans several lines along the X and Y axes, calculating the eccentricity of inner and outer circle, by which pipes with wrong end-shape can be classified removed.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.1016-1023
• /
• 2022

In proton therapy, a highly conformal proton dose can be delivered to the tumor by means of the steep distal dose penumbra at the end of the beam range. The proton beam range, however, is highly sensitive to range uncertainty, which makes accurately locating the proton range in the patient difficult. In-vivo range verification is a method to manage range uncertainty, one of the promising techniques being prompt gamma imaging (PGI). In earlier studies, we proposed gamma electron vertex imaging (GEVI), and constructed a proof-of-principle system. The system successfully demonstrated the GEVI imaging principle for therapeutic proton pencil beams without scanning, but showed some limitations under clinical conditions, particularly for pencil beam scanning proton therapy. In the present study, we upgraded the GEVI system in several aspects and tested the performance improvements such as for range-shift verification in the context of line scanning proton treatment. Specifically, the system showed better performance in obtaining accurate prompt gamma (PG) distributions in the clinical environment. Furthermore, high shift-detection sensitivity and accuracy were shown under various range-shift conditions using line scanning proton beams.

• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.459-467
• /
• 2016

Using a line scan camera and a Galvano mirror, we constructed a high-speed line-scanning microscope that can generate 2D images ($8000{\times}8000pixels$) without any moving parts. The line scanner consists of a Galvano mirror and a cylindrical lens, which creates a line focus that sweeps over the sample. The measured resolutions in the x (perpendicular to line focus) and y (parallel to line focus) directions are both $2{\mu}m$, with a 2X scan lens and a 3X relay lens. This optical system is useful for measuring defects, such as spalling, chipping, delamination, etc., on the surface of carbon fiber reinforced plastic (CFRP) holes after machining in conjunction with adjustments in the angle of LED lighting. Defects on the inner wall of holes are measured by line confocal laser scanning. This confocal method will be useful for analyzing defects after CFRP machining and for fast 3D image reconstruction.

• 한국ITS학회 논문지
• /
• 제11권4호
• /
• pp.95-103
• /
• 2012

본 논문에서는 송전선로 중장비 접촉사고 방지를 위한 감시 시스템을 구현하였다. 시스템의 설계는 레이저 스캔기술을 적용하여 설계하였다. 설계한 시스템의 세부적 기능을 분석하였다. 감시 시스템을 구현하여 감시파라미터인 검출율과 오류율을 측정하였으며 기존 감시시스템과 비교하였다. 측정결과 기존대비 검출율은 95.8%에서 100%로 향상되었고, 오류율은 2.1%에서 0%로 개선된 결과를 보였다. 연구한 시스템은 접촉사고에 가능성이 있는 위해 개소의 중장비를 감지하고 현장작업자와 관리자에게 정보를 제공하여 사고를 예방해 주는 시스템이므로 송전선로 접촉사고 방지를 위한 감시시스템에 유용하다.