• 제어로봇시스템학회논문지
• /
• 제3권4호
• /
• pp.406-414
• /
• 1997

A real-time inspection system is developed using line scan cameras. Several improved algorithms are proposed for real-time detection of defects in this automated inspection system. The major improved algorithms include the preprocessing, the threshold decision, and the clustering algorithms. The preprocessing algorithms are for exact binarization and the threshold decision algorithm is for fast detection of defects in 1-D binary images. The clustering algorithm is also developed for fast classifying of the defects. The system is applied to PCBs(Printed Circuit Boards) inspection. The typical defects in PCBs are pits, dent, wrinkle, scratch, and black spots. The results show that most defects are detected and classified successfully.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.59-60
• /
• 2012

• 자원리싸이클링
• /
• 제17권6호
• /
• pp.43-49
• /
• 2008

본 연구에서는 라인스캔 카메라를 이용한 색도인식 스크랩 선별시스템을 설계 제작하고 제작한 시스템을 이용하여 철스크랩에 혼합되어 있는 Cu 스크랩을 자동으로 분리하는 연구를 수행하였다. 스크랩 자동선별 시스템은 크게 측정부, 이송부 그리고 이젝터로 구분되며 라인스캔 카메라, 광원 및 frame grabber로 구성된 측정부에서 스크랩 표면의 색도를 이메지 프로쎄싱 알고리즘에 의해 인식함으로써. 임의로 지정한 특정한 표면색상의 스크랩만에 에어노즐을 작동케 하여 선별하도록 되어 있다. 본 연구에서는 선별처리의 고속화에 대응하기 위하여 주파수 가변 광원시스템을 제작하여 선별시스템에 적용하였으며, 최적실험조건으로 스크랩 이송속도 25 m/min.에서 철스크랩중에 포함되어 있는 Cu스크랩을 90%이상 인식하여 약 80%의 선별효율을 얻었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.518-518
• /
• 2008

현재 전차선 높이 및 편위 측정을 위한 측정시스템은 원천기술 자체를 독일, 일본, 프랑스, 이탈리아에서 제품개발 이전에 기술 특허를 출원하여 선점이 되어있어 국내 전차선에 적합하고 정밀도가 높은 기술 개발과 더불어 측정을 위한 원천기술의 자체개발이 필요하다. [1, 2] 따라서, 독자적이고 독립적인 원천기술을 개발하고 객관적 검증을 위해 기초시험과 이미지프로세싱 기법을 이용한 선형화로 원천, 측정기술 확보와 동시에 실질적 기술 검증이 필요하다. 이를 위해 Line Scan Camera 및 시스템 구성 후 시험을 위해 카메라고정과 모의시험을 위해 지그를 제작하였으며 측정된 데이터를 저장하고 Line Scan Camera를 동작하기 위한 프로그램을 개발하여 이를 구현하고자 하였다.

• 융복합기술연구소 논문집
• /
• 제6권1호
• /
• pp.23-26
• /
• 2016

DC motor shafts have several defects such as double cut, deep scratch on surface, and defects in diameter and length. The deep scratches are due to collision among the other shafts. So the scratches are long and thin but their orientations are random. If the smallest enclosing box, i.e. oriented bounding box for a detective point group is found, then the size of the corresponding defect can be modeled as its diagonal length. This paper proposes an suface inspection algorithm for the DC motor shaft using the oriented bounding box. To evaluate the proposed algorithm, a test bed is made with a line scan CCD camera (4096 pixels/line) and two rollers mechanism to rotate the shaft. The experimental result on a pre-processed image with contrast streching algorithm, shows that the proposed algorithm sucessfully finds 150 surface defects and its computation time (0.291 msec) is enough fast for the requirement (4 seconds).

• 제어로봇시스템학회논문지
• /
• 제15권8호
• /
• pp.761-771
• /
• 2009

Detecting defects on FPD (Flat Panel Display) color filter before the full panel is made is important to reduce the manufacturing cost. Among many types of defects, the low contrast blemish such as Suzi Mura is difficult to detect using standard CCD cameras. Even skilled inspectors in the inspection line can hardly identify such defects using bare eyes. To overcome this difficulty, point spectrometer has been used to analyze the spectrum to differentiate such defects from normal color filters. However, scanning ever increasing-size color filters by a point spectrometer takes too long time to be used in real production line. We propose a system using a spectral camera which can be viewed as a line scan camera composed of an array of point spectrometers. Three types of lighting system that exhibit different illumination spectrums are devised together with a calibration method of the proposed spectral camera system. To visualize the defect areas, various processing algorithms to identify and to enhance the small differences in spectrum between defective and normal areas are developed. Experiments shows 85% successful visualization. of real samples using the proposed system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.551-552
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.235-236
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.485-486
• /
• 2009

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.51-54
• /
• 2007

The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Cofired Ceramic (LTCC) technology can be defined as a way to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and / or resistive pastes on. These single green-sheets have to be laminated together and fired in one step all. Main functionality of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used for developing the algorithm. In order to measure the entire film area using several scanning steps, the overlapping method is used. In the process of development of the algorithm based on the image processing and analysis, strong background technology and know-how have been accumulated.