• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.1016-1023
• /
• 2009

In this paper, a tracking bias compensation method is proposed for future global navigation satellite systems (GNSSs). It is observed that the correlation function of a GNSS signal has many peaks and remains almost unchanged in the advanced offset region as a result of the multipath signals arriving at the receiver later than a line-of-sight signal. Based on these observations, we use the slopes in the advanced offset region to compensate for the code tracking bias, and obtain the maximum code tracking bias, which is essential to implement the proposed scheme, in static multipath environments. Finally, it is demonstrated that the proposed compensation method is very effective for the GNSS signal tracking in terms of the code tracking biases and their running averages.

• Fire Science and Engineering
• /
• v.31 no.4
• /
• pp.20-25
• /
• 2017

In the present study, the temperature distribution of droplet diffusion flames was predicted from the measurements of radiative emissions of soot particles formed. In order to predict the temperature distributions, the radiative emissions from soot particles filtered at both 700 nm and 900 nm were measured using CCD cameras and local emission distributions within the flame deconvoluted with Abel transformation were plugged into a two color method. The experimental results obtained from the present study demonstrate that the two color method as tool for temperature measurements is feasible but can introduce approximately 2% maturement errors in a deconvolution process depending on intervals for the line of sight. The estimated error in temperature measurements was found to be within 18 K at 2000 K.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.786-791
• /
• 2021

In this paper, in order to minimize limitations such as signal interference and positioning errors in existing indoor positioning systems, a smart LED-based positioning system for excellent line-of-sight radio environments and precise location tracking is proposed to improve accuracy. An IEEE 802.4 Zigbee module is mounted on the SMPS board of a smart LED; RSSI and LQI signals are received from a moving tag, and the system is configured to transmit the measured data to the positioning server through a gateway. For the experiment, the necessary hardware, such as the gateway and the smart LED module, were separately designed, and the experiment was conducted after configuring the system in an external field office. The positioning error was within 70cm as a result of performing complex calculations in the positioning server after transmitting a vector value of the moving object obtained from the direction sensor, together with a signal from the moving object received by the smart LED. The result is a significantly improved positioning error, compared to an existing short-range wireless communications-based system, and shows the level at which commercial products can be implemented.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.410-416
• /
• 2023

Unlike geostationary satellite communication systems, low-earth orbit(LEO) satellite communication systems move at relatively high speeds, and the angle with the ground device is not fixed and varies over a wide range. The propagation channel condition between satellites and ground nodes cannot be assumed line of sight(LOS) anymore. This paper analyzes the low-orbit multi-path fading satellite channel model that can occur in LEO satellite communication systems and Doppler frequency transition caused by high-speed maneuvering of LEO satellites and presents effective equalization techniques for OFDM and SC-FDE transmission methods suitable for multi-path frequency selective fading satellite channel models. In addition, this paper compares and analyzes the performance of OFDM and SC-FDE transmission methods in multipath fading LEO satellite channel environment using the proposed equalization techniques through simulations. Simulation results showed that SC-FDE outpeformed OFDM.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.1
• /
• pp.93-100
• /
• 2012

A telemetry signal occurs the line-of-sight problem by the effect of geography in flight test. A fixed relay system or a mobile relay system is used to solve that problem in general but we propose an airborne telemetry relay system using aircraft in this paper. An airborne telemetry relay system receives the telemetry signal of the test vehicle and then retransmits it to the ground system. The receiving antenna which is a phased array antenna can be tilted to ${\pm}30^{\circ}$ beam direction by beam-forming and track the rapidly moving test vehicle in effect. The relay pod which is mounted to an aircraft consists of the front antenna and the side antenna. It receives S-band signal and then down-converts the frequency to L-band signal. As a result, that can remove the frequency interference on an aircraft while retransmitting.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.101-106
• /
• 2002

In a bank-to-turn(BTT) missile, if a 2-gimbaled seeker was stabilized using a 2-axis rate gyro mounted along its primary axis, the change of line of sight(LOS) measured by the seeker would be induced by rolling effects due to bank-to-turn(BTT) steering as well as an actual change. It is observed that the body-coupled effects in a homing loop of BTT missile are mainly concerned with the spurious target maneuver and the coupling due to the rate gyro misalignments. In this paper, we formulate a simple linear BTT homing loop model with seeker model including each body-coupling. With the model, we analyze the effects of the couplings on the homing loop stability, and propose a direct linear compensator for the coupling to recover the stability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3C
• /
• pp.255-263
• /
• 2010

In this paper, we present an efficient cooperative transmission scheme for high speed 60GHz WPAN system. In 60GHz, the cooperative transmission with relay is effective scheme because signals are exceedingly attenuated according to the distance and the transmission is impossible when there is no LOS between transmitter and receiver. Moreover, the reliability of signal in destination can be improved by receiving data from a relay as well as a transmitter. However, the overall data rate is reduced because transmission time is more required for relay. To solve this problem, we propose a cooperative transmission scheme with RS-CC serial concatenated codes. In the proposed cooperative transmission scheme, the relay can reduce the transmission data size because the only parity bits of systematic RS code are transmitted after encoding by CC. But the computational complexity is increased at the relay and the destination.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.365-373
• /
• 2023

Unmanned aerial vehicles are widely used in various fields, and real-time path replanning is a critical factor in enhancing the safety and efficiency of these devices. In this paper, we propose a real-time path replanning technique based on RRT* and LOSPO. The proposed technique first generates an initial path using the RRT* algorithm and then optimizes the path using LOSPO. Additionally, the optimized path can be converted into a trajectory that considers actual time and the dynamic limits of the aircraft. In this process, environmental changes and collision risks are detected in real-time, and the path is replanned as needed to maintain safe operation. This method has been verified through simulation-based experiments. The results of this paper make a significant contribution to the research on real-time path replanning for UAVs, and by applying this technique to various situations, the safety and efficiency of UAVs can be improved.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.323-328
• /
• 2007

Communication systems beyond 3G should provide more than 100 Mbps for wireless access. In addition to smart antennas, wireless multi-hop networks are proposed to increase the cell size and throughput. For example, Zigbee technology is expected to provide low cost and low power connectivity and can be implemented in wireless mesh networks larger than is possible with Bluetooth. Also, home embedded system using wireless mesh network is one of the key market areas for Zigbee applications. If the line-of-sight path is shadowed by home obstacles, a direct connection between the access point (AP) and the node is not possible at high frequencies. Therefore, by using multi-hop relay scheme the end node can be reached to AP. In this paper, the relaying of data between the AP and the end node is investigated and the throughput and PER(Packet Error Rate) are evaluated in multi-hop wireless mesh networks by using DSSS/BPSK system.

• Journal of Korea Multimedia Society
• /
• v.9 no.2
• /
• pp.172-188
• /
• 2006

Sensor localization is one of the fundamental problems in wireless sensor networks. Previous localization algorithms can be classified into two categories, the GGB (Global Geometry-Based) approaches and the LGB (Local Geometry-Based). In the GGB approaches, there are a fixed set of reference nodes of which the coordinates are pre-determined. Other nodes determine their positions based on the distances from the fixed reference nodes. In the LGB approaches, meanwhile, the reference node set is not fixed, but grows up dynamically. Most GGB algorithms assume that the nodes are deployed in a convex shape area. They fail if either nodes are in a concave shape area or there are obstacles that block the communications between nodes. Meanwhile, the LGB approach is vulnerable to the errors in the distance estimations. In this paper, we propose new localization algorithms to cope with those two limits. The key technique employed in our algorithms is to determine, in a fully distributed fashion, if a node is in the line-of-sight from another. Based on the technique, we present two localization algorithms, one for anchor-based, another for anchor-free localization, and compare them with the previous algorithms.