• 천문학논총
• /
• 제30권2호
• /
• pp.233-234
• /
• 2015

We present results of a new high-resolution spectroscopic study of the RS CVn-type binary system EI Eridani (HD26337). We used high S/N ratio LSD profiles to measure a new RV orbit of the primary component and new orbital parameters. We found evidence of strong spectral line profile variations at time intervals indicating the existence of short-lived (few days) spots on the surface of the primary component. We measured a projected rotation velocity of star of 53.2 km/s.

• 한국광학회지
• /
• 제2권2호
• /
• pp.96-102
• /
• 1991

Monitoring the surface profile real time on the manufacturing line of planar products has been accomplished by employing the scattering of a laser light. The laser beam was focused onto the surface and the direction of the reflected beam was utilized to obtain the slope of the surface facet. By taking data fast enough, it was possible to obtain the microscopic surface structure. The mean roughness thus obtained agreed well with the ones found with the mechanical stylus instrument. There was discrepancy between the two results as to the number of peaks per com. A simple model based on the deconvolution of the raw data was found adequate to improve the agreement to an acceptable level.

• 대한전기학회논문지
• /
• 제32권6호
• /
• pp.191-198
• /
• 1983

This paper describes the aplication of different model which can be used for short-term load prediction. The model is based on Bohlin's approach to first develop a load profile model representing the nominal load component and the Box-Jenkins approach is used to predict residuals. An on-line algorithm using Kalman Filter and Time Series is implemented for and hour-ahead prediction. In the Kalman Filter system equation and measurement equation were fixed and parameters of Time Series were varied week after week. A set of data for Korea Electric Power Corporation from April to June 1981 was used for the evaluation of the model. As the result of this simulation 1.2% rms error was acquired.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.86-87
• /
• 2007

The dispersive method of white-light interferometry is proper for in-line 3-D inspection of dielectric thin-film thickness to be used in the semiconductor and flat-panel display industry. This research is the measurement application of CMP patterned wafer. The results describe 3-D and 2-D profile of the step height during polishing time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.273-275
• /
• 1998

This paper presents a method of determining the minimum amount of reactive power capacity installation and minimizing transmission line losses. It deals with maintaining voltage profile within an acceptable range with respect to the increase in load demand. Our approach provides three-different stages to power system planner. First stage considers existing capacitors. Second stage considers expanding the size of the installed capacitors. Third stage considers existing capacitors and newly installed capacitors whose locations are irrelevant to the locations of existing ones. Validity and effectiveness of the proposed algorithm are confirmed by results on modified New England 30 bus test system.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.145-152
• /
• 2004

This paper proposed efficient manufacturing system using the OMM (on-machine measurement) system. The OMM system is software based 3D modeler for inspection on machine and it is interfaced tool machine with RS232C. The software is composed of two inspection modules that one is touch probe operating module and the other is laser displacement sensor operating module. The module for touch probe has need of inspection feature that extracted it from CAD data. Touch probe moves to workpiece by three operating modes as follows: manual, general and automatic mode. The operating module of laser displacement sensor is used inspection for profile and very small hole. An Advantage of this inspection method is to be able to execute on-line inspection during machining or after it. The efficiency of proposed system which can predict and definite the machining errors of each process is verified, so the developed system is applied to inspect the mold-base(cavity, core).

• 융복합기술연구소 논문집
• /
• 제3권2호
• /
• pp.17-21
• /
• 2013

Hot cross wedge rolling process as an incremental forming has many advantages such as the material usage, the short process time, the automatic equipment line and the low forming load. However, it occurs some defects such as the surface groove, the axis warping and the Mannesmann hole. In this paper, the defect of the Mannesmann hole was carried out. Finite element analysis was utilized to reveal the stress distribution, the rotation of the specimen and the change of section profile. Cross wedge rolling experiment was also conducted on the generation of the Mannesmann hole. It was demonstrated according to the spreading angle with respect to the various types of material. In the view point of metal flow, the smaller forming angle and the larger spreading angle increase opportunities of the defect hole generations.

• Natural Product Sciences
• /
• 제28권2호
• /
• pp.62-67
• /
• 2022

Column chromatographic fractionation of the methanol and ethyl acetate extracts of the stem-bark of Anacardium occidentale led to the isolation of five compounds (1-5). Their structures were determined by spectroscopic means by comparing spectral data to be β-sitosterol (1), 2,4-dihydroxy acetophenone (2), 1-monolinolein (3), ethyl oleate (4) and β-sitosterol-3-O-β-D-glucopyranoside (5). These compounds were evaluated for cytotoxicity against human cancer cell lines: A549, SCOV3 and rat normal cell line NRK49f. Compounds 2-5 were for the first time isolated from A. occidentale.

• 한국항만학회지
• /
• 제10권1호
• /
• pp.25-36
• /
• 1996

Generally, it is pointed out that a nonlinear analysis is needed to estimate accurately the water surface fluctuation and dynamic responses of a floating structure in case of large wave reflection. In this study, a frequency-domain method is applied and newly developed to analyze the nonlinear characteristics of the air-chamber floating breakwater. The air-chamber floating breakwater in this study can control well the wave transformation, motions of the structure and its natural frequency by adjusting the air depth in the chamber. Experiments are carried out to verify the numerical results. It is appeared that the mean water level is setup in the anti-node and setdown in the node, while the nonlinearity in wave profile is larger in the node than in the anti-node. Because of vertical mooring system, the sway, especially the time-independent nonlinear component, plays predominant role in the motion. On the other hand, the time-dependent component, as well as the time-independent one to the tensile force of mooring line contributes greatly, and the time averaged value presents tensional force oriented to the onshore side due drift force.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.148-156
• /
• 1996

Automatic product system is gradually increasing according to development of industrial society. On-line measurement makes a important role in view of economic and effective side in industrial product system. Syncronization system is developed to measure screw thread which is rotating. In-process measuring of rotating body have a lot of difficuties even thoufht using various method containing high speed camera. So, now we suggest one of the new method which is not so expansive. In this study, digital value was produced through the image processing algorithm from acquired orignal image. As a result, we have a good agreement between measuring values calculated from image conture and measuring values acquired from profile project by means of experiment, respectively.