• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.267-270
• /
• 2010

In filtering of urban lidar data, low outliers or opening underground areas may cause errors that some ground points are labelled as non-ground objects. To solve such a problem, this paper proposes an automated method which consists of RANSAC algorithm, one-dimensional labeling, and morphology filter. All processes are conducted along the lidar scan line profile for efficient computation. Lidar data over Dajeon, Korea is used and the final results are evaluated visually. It is shown that the proposed method is quite promising in urban dem generation.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.35-44
• /
• 2004

In this study, one dimensional aerodynamic and structural study of a partial admission turbo pump turbine was performed. A turbine consists of a nozzle, rotor, outlet guide vanes. The aerodynamic characteristics of each component was derived from the governing equation and validated from the CFD calculations. One-dimensional basic design such as velocity triangles was conducted from the mean line analysis and modified from the 2-D and 3-D CFD analysis. The blade profile was determined by the CFD optimization. The thermal stress analysis and structural analysis are needed to be studied in the next design stage.

• The Journal of the Korean dental association
• /
• v.16 no.4 s.107
• /
• pp.279-282
• /
• 1978

A girl aged 16 years and I month, had a severe Angle's class III malocclusion, characterized by a retarded and constricted maxilla, anterior and posterior crossbite. This patient underwent extraction of two lower Ist premolar. After extraction, author placed multibanded system in lower dental arch to change the long axis of anterior teeth and delivered removable appliance with Coffin spring in the upper dental arch to expand dental arch. After 13 months, anterior & posterior crossbite was corrected and this patient's profile was improved. Superimposition of pretreatment and posttreatment cephalograms upon the SN line registered at S showed backward downward rotation of the mandible and retrusion of lower lip.

• The Journal of the Korean dental association
• /
• v.16 no.4 s.107
• /
• pp.273-278
• /
• 1978

A girl aged 16 years and I month, had a severe Angle's class III malocclusion, characterized by a retarded and constricted maxilla, anterior and posterior crossbite. This patient underwent extraction of two lower Ist premolar. After extraction, author placed multibanded system in lower dental arch to change the long axis of anterior teeth and delivered removable appliance with Coffin spring in the upper dental arch to expand dental arch. After 13 months, anterior & posterior crossbite was corrected and this patient's profile was improved. Superimposition of pretreatment and posttreatment cephalograms upon the SN line registered at S showed backward downward rotation of the mandible and retrusion of lower lip.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2253-2255
• /
• 1999

Plasma source ion implantation (PSII) is a non-line-of-sight technique for surface modification of materials which is effective for non-planar targets. Properties such as hardness, corrosion resistance, wear resistance and friction can be improved without affecting the bulk properties of the material. Type 304 austenitic stainless steel was treated by nitrogen plasma ion implantation at a target bias of -50kV. Surface properties, including microhardness and ion depth profile, were studied.

• Journal of ILASS-Korea
• /
• v.7 no.2
• /
• pp.1-6
• /
• 2002

It is necessary to develope a high frequency diode laser sensor system based on the absorption spectroscopy for the measurement of temperature of the spray flame. DFB diode laser operating near $2.0{\mu}m$ was used to scan over selected $H_2O$ transitions near $1.9{\mu}m\;and\;2.2{\mu}m$, respectively. The measurement sensitivity at wide range of sweep frequency was evaluated using multi-pass cell containing $CO_2$ gas. This diode laser absorption sensor with high temporal resolution up to 10kHz was applied to measure the gas temperature in the spray flame region of liquid-gas 2-phase counter flow flame. The successful demonstration of time series temperature measurement in the spray flame gives us motivation of trying to establish non-intrusive temperature measurement method in the practical spray flame.

• Journal of The Korean Astronomical Society
• /
• v.23 no.1
• /
• pp.31-42
• /
• 1990

Fine structures of a quiescent prominence are studied by analyzing high resolution H alpha filtergrams and H alpha line spectra observed at the Hida Observatory of Kyoto University. We have found two kinds of downward motions in the prominence. One of them is a movement with a constant acceleration below the solar gravity(${\simeq}1/4g_s$) and the other with an uniform velocity(${\simeq}16Km/s$). The average life time and the size of prominence knots are estimated to be about 7 minutes and 4000Km, respectively. Spatial and brightness distribution of knots are also presented in this paper. With the analytical solutions derived from magnetostatic equilibrium in the prominence, we have examined the filamentary structure based on the Kippenhahn-Schluter model. Sag angles of the magnetic fields supporting the prominence matter are predicted from the observed density profile.

• Journal of the Korean Geophysical Society
• /
• v.6 no.4
• /
• pp.269-276
• /
• 2003

Sub-bottom profile were conducted in Chungju Regulation Lake by use of ground penetrating radar(GPR). The survey area covers approximately 1,000,000 $m^2$ and total survey line length is about 5km and more. GPR surveys with GPS system were made across and transverse direction of the lake. From the survey results of GPR, it could be possible to distinguish the gravel and/or sand dominant bed from silt and/or clay material dominant bed.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1115-1120
• /
• 2005

characteristic of wear between wheel and rail is important factor of judgement to maintenance. KHST is optimized on an exclusive rail, UIC60. but also KHST is running on the variety existing line as well as KS50N, KS60 et,c. Hail profile of KS50N is dissimilar to DIC60. So we can predict that characteristic of wear is embodied also different. In this paper. we deduced the force and point of contact position between wheel and rail through multi-dynamics analysis and predicted wear of wheel and rail through contact problem analysis. we used simplified theory of kallker on contact problem, and Predicted the wear phenomenon of wheel using archard wear equation about each condition.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2002.11a
• /
• pp.130-136
• /
• 2002

Device makers want to make higher density chips as devices shrink, especially WSix poly stack down is one of the key issues. However, EPD (End Point Detection) time delay was happened in DPS+ poly chamber which is a barrier to achieve device shrink because EPD time delay killed test pattern and next generation device. To investigate the EPD time delay, a test was done with patterned wafers. This experimental was carried out combined with OES(Optical Emission Spectroscopy) and SEM (Scanning Electron Microscopy). OES was used to find corrected wavelength in WSix stack down gate etching. SEM was used to confirm WSix gate profile and gate oxide damage. Through the experiment, a new wavelength (252nm) line of plasma is selected for DPS+ chamber to call correct EPD in WSix stack down gate etching for current device and next generation device.