• 한국철도학회논문집
• /
• 제8권5호
• /
• pp.483-489
• /
• 2005

Railway wheel/rail contact conditions have influences on dynamic behavior of the rolling stock. If there are incompatibility problems between the wheel and rail, damages like wheel wear, wheel spalling, rail wear, etc are occurred. Especially wheel and rail profiles are important factors of vehicle curving performance, so compatibility studies between wheel and rail profiles have to be carried out preferentially. In this study, we have studied the compatibility between wheel and rail profiles of KNR conventional line to analyze the dynamic performances of the rolling-stock. Thus we showed the results relating to wheel/rail geometric contact, vehicle running performances as the change of wheel/rail combination.

• 천문학회보
• /
• 제35권1호
• /
• pp.91.2-91.2
• /
• 2010

We present far-ultraviolet (FUV) observations of comet C/2001 Q4 (NEAT) obtained with Far-ultraviolet Imaging Spectrograph (FIMS, also called SPEAR) around perihelion between 8 and 15 May 2004. Several important emission lines, including S I (1425, 1474 ${\AA}$), C I (1561, 1657 ${\AA}$), CO (1087.9, 1340-1680 ${\AA}$) were detected. Especially, the spectral features of CO are its electronic transitions belongings to the A-X, C-X systems. We also obtained radial profile of S I, C I, H I $Ly{\beta}$ with line fitting from central coma. The production rate of several spectral lines calculated from observed FUV photon flux. FUV spectral images of S I, C I, H I $Ly{\beta}$ emission lines were obtained.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.473-477
• /
• 2003

In this paper, a integrated structure of a two-element microstrip patch antenna with two feeds for GPS/PCS dual-band operation is proposed. The radiating element for PCS operation is a novel broad band low-profile cylindrical monopole top-loaded with a shorted meander patch, which gives linearly polarized conical radiation pattern and size reduction of patch due to meander line. The radiating element for GPS operation is a novel square-ring microstrip patch with truncated corners and slits. which provide circularly polarized broadside radiation patterns and size reduction due to slots. using dielectric substrate in GPS antenna of proposed antenna provide to improve isolation between two feeds and reduce size of patch. The proposed antenna achieves the bandwidth and polarization requirements of GPS and PCS systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.27-28
• /
• 2008

For stable and sustainable energy supply, distributed generator (DG) has become an essential and indispensable element from environmental and energy security perspectives. However, installation of DG in distribution systems may cause negative affects on feeders because power outputs of DG could be changed irregularly. One of major negative affects is variation in voltage profile. In general, voltage regulation devices such as under load tap changer (ULTC) at distribution substation and step voltage regulator (SVR) along feeder in distribution system are used to maintain customers' receiving voltage within a predetermined range. These regulators are controlled by line drop compensation (LDC) method which calls for two parameters; the equivalent impedance and the load center voltage. Therefore, consideration of DG outputs in the LDC parameter design procedure may give large impact on the installable DG capacity. This paper proposes a method that estimates maximum Installable DG capacity considering LDC parameters of ULTC and SVR. The proposed algorithm is tested with model network.

• Journal of Mechanical Science and Technology
• /
• 제20권8호
• /
• pp.1159-1168
• /
• 2006

In this paper, a new revolute mobile robot arm with five degree of freedom (d.o.f) was developed for autonomous moving robots. As a control system for the robot arm, a distributed control system composed of the main controller and five motor controllers for arm joints was developed. The main controller and the motor controllers w ε re developed using the ARM microprocessor and the TMS320c2407 microprocessor, respectively. A new trajectory tracking algorithm for the motor controllers was devised employing pre-generated off-line trajectory data. Also, a 3-D simulator based on the openGL software to simulate the motion of the robot arm was developed. To validate the performance of the robot system, experiments to track a specified trajectory were performed.

• 드라이브 ㆍ 컨트롤
• /
• 제10권3호
• /
• pp.7-13
• /
• 2013

Hydraulic vane pumps are widely used in various hydraulic systems because of its compactness and light weight. It is well known that the vanes and cam ring are separated by very thin liquid films which result in the EHL state. Contrary to the case of cylindrical roller bearings, the inlet and side boundary pressures are much higher than the atmospheric pressure. In this paper, a numerical solution of the EHL of finite line contacts between the cam ring and vane tip with profiled ends is presented. Using a finite difference method with non-uniform grids and the Newton-Raphson method, converged solutions are obtained for moderate load and material parameters. The EHL pressure distribution and film shape are considerably affected by pump delivery pressure and the side boundary condition applied. Both the maximum pressure and the minimum film thickness always occurred near the edge regions. The present results can be used in the design of optimum vane profile in hydraulic vane pump.

• 한국산학기술학회논문지
• /
• 제12권10호
• /
• pp.4626-4631
• /
• 2011

본 논문에서는 RFID 기술을 이용한 유비쿼터스형 쇼핑몰을 설계하고 환경분석 데이터를 분석한 결과를 토대로 고객서비스를 제공하기 위한 방법으로 오프라인 쇼핑몰에서 실시간으로 고객의 위치를 파악하는 위치분석 시스템 설계와 개인화된 정보를 적시에 제공해 줄 수 있는 지능형 에이전트 시스템을 제안한다.

• 한국농공학회지
• /
• 제43권5호
• /
• pp.63-69
• /
• 2001

The main purpose of this study is to seek desalinization effect of subsurface drainage system with rice hull packing in Dae-Ho Reclaimed Land. After 4 years installed sub-surface drainage system, distribution of drained water electric conductivity (ECw) was 4.43~12.78 ds/m. The soil profile showed partial development of the soil structure and compaction of subsoils with increased bulk density. The bulk density of the subsoil was 1.42~1.66 g/cm$^3$, which might limit root growth. The soil color changed near the drainage pipe line. Distribution of soil extract solution ECe and SAR as subsurface drainage pipe position and drainage canal distance showed desalinization effect of subsurface drainage system with rice hull packing as widening effective zone of subsurface drainage pipe.

• 자원환경지질
• /
• 제18권4호
• /
• pp.301-308
• /
• 1985

I.P exploration is conducted mainly at the alluvium covered granodiorite stock of the Red Hill area at the Dongjeom coal mine, employing Canadian Mcphar equipments of variable frequencies-domain method along a total of 8.5 survey line. Mineralization zone is found by LP anomalies along the I.P the profile of frequency mode. Comparing with the past drilling data, the cause of each anomly is furthermore identified as copper bearing mineralized zones. As alteration and mineralization cover all over the Red-Hill altered grandiorite, copper bearing sulfide veinlets and strings filled out the fractured and altered zones.

• 한국레이저가공학회지
• /
• 제18권3호
• /
• pp.6-8
• /
• 2015

Finishing process includes deburring, polishing and edge radiusing. It improves the surface profile of specimen and eliminates the alien substance on surface. Deburring is the elimination process for debris of edges. Polishing lubricates surfaces by rubbing or chemical treatment. There are two types for electron finishing. The one is using pulse beam. The other is using the convergent and scanning electron beam. Pulse type device appropriates the large area process. But it does not control the beam dosage. Scanning type device has advantages for dosage control and edge deburring. We design the convergence and scan type. It has magnetic lenses for convergence and scan device for scanning beam. Magnetic lenses consist of convergent and objective lens. The lenses are designed by the specification(beam size and working distance). In this paper, we evaluate the convergence performance by pattern process. Also, we analysis the results and important factors for process. The important factors for process are beam size, pressure, stage speed and vacuum. These results will be utilized into systematizing pattern shape and the factors.