• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.578-588
• /
• 1998

In this paper, we analyzed the propagation characteristics of polarization diversity in the view of diversity gain, cross correlation coefficient and average received signal strength, and compared it with those of space diversity. From the results, we could confirm that in the care of line of sight(LOS), space diversity gain is bigger than polarization diversity gain by 2 dB and the diversity gain of mobile transmitting with 90 degree is bigger than that of mobile transmitting with 45 degree by 1 dB. However, in the area of non-line of sight(NLOS), the diversity gains were all most the same in two diversity schemes and in specular cases, polarization diversity showed better performances. Also it was verified that under the NLOS conditions, diversity gain of mobile transmitting with 45 degree was at least 1 dB bigger than that of mobile transmitting with 90 degree.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.140-146
• /
• 2018

Recently, VLC(Visible Light Communication) fusing with LED(Light Emitting Diode) used in indoor lighting and wireless communication technology has attracted attention. However, the VLC can communicate only within the coverage to measure the optical signal and the communication disconnection phenomenon is occur in the NLoS(Non-Line-of-Sight) area. In this paper, we propose VLC relay module to extend the coverage of VLC and improve the communication disconnection phenomenon in NLoS area. The proposed VLC relay module transmits the packet received from the transmitter to the VLC relay module and receiver. The experiment was carried out by installing one VLC transmitter and three VLC relay modules, communication coverage expansion and the improvement of communication disconnection phenomenon in the NLoS were confirmed by the increase of the VLC relay module. Also, we confirmed that the optical signal measurement performance is improved 2.4 times by using the dual sampling method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.591-593
• /
• 2019

LPWA has a small amount of data that can be transmitted at one time, but it can collect a very wide range of information, so it is suitable for gathering information of apartment meter or collecting data intermittently sent from industrial site. However, most of the application studies on LPWA are limited to outdoor, especially LOS environment, so it is difficult to collect information for application to apartment and industrial sites. In this paper, we have measured the communication coverage within the building, which is a NLOS environment, so that LPWA communication can be applied to apartments and industrial sites. For the experiment, LoRa module was created using sx1276, Class A was applied, and the spread factor was changed for each layer. As a result, in case of spreading factor 7 that shows increasing error and losses from the 7 floor, but the in case of spreading factor 12, the data could be seamlessly received even on the 9th floor without error and losses.

• Current Optics and Photonics
• /
• v.2 no.3
• /
• pp.241-249
• /
• 2018

We report a midinfrared dual-field-of-view (FOV) optical system design for an airborne electro-optical targeting system. To achieve miniaturization and weight reduction of the system, it has a common aperture and fore-optics for three different spectral wavelength bands: an electro-optic (EO) band ($0.6{\sim}0.9{\mu}m$), a midinfrared (IR) band ($3.6{\sim}4.9{\mu}m$), and a designation laser wavelength ($1.064{\mu}m$). It is free to steer the line of sight by rotating the pitch and roll axes. Our design co-aligns the roll axis, and the line of sight therefore has a fixed entrance pupil position for all optical paths, unlike previously reported dual-FOV designs, which dispenses with image coregistration that is otherwise required. The fore-optics is essentially an achromatized, collimated beam reducer for all bands. Following the fore-optics, the bands are split into the dual-FOV IR path and the EO/laser path by a beam splitter. The subsequent dual-FOV IR path design consists of a zoom lens group and a relay lens group. The IR path with the fore-optics provides two stepwise FOVs ($1.50^{\circ}{\times}1.20^{\circ}$ to $5.40^{\circ}{\times}4.32^{\circ}$), due to the insertion of two Si lenses into the zoom lens group. The IR optical system is designed in such a way that the location and f-number (f/5.3) of the cold stop internally provided by the IR detector are maintained when changing the zoom. The design also satisfies several important performance requirements, including an on-axis modulation transfer function (MTF) that exceeds 10% at the Nyquist frequency of the IR detector pitch, with distortion of less than 2%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1058-1064
• /
• 2006

In this paper, the channel capacity of a specified wireless indoor multiple-input multiple-output(MIMO) channel is estimated by analyzing spatial characteristics of this channel using the three-dimensional ray tracing method, and a technique for deriving an optimized separation of multi-antenna elements is proposed. At first, the ray paths, the path losses, and the time-delay profile are computed using the three-dimensional ray tracing method in an indoor corridor environment, which has the line of sight(LOS) and non-line of sight(NLOS) regions. The ray tracing method is verified by a comparison between the computation results and the measurements which are obtained with dipole antennas, an amplifier and a network analyzer. Then, an MIMO system is positioned in the indoor channel environment and the ray paths and path losses are computed for four antenna-position combinations and various values of the antenna separation to obtain the channel capacity for the MIMO system. An optimum antenna-separation is derived by averaging the channel capacities of 100 receiver positions with four different antenna combinations.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.357-362
• /
• 2021

UWB(ultra wide band) communication systems employ short pulses to transmit information which spreads the signal energy over a very wide frequency spectrum. Received signal-to-noise power ratio of UWB signals is an important factor in determining the accuracy of a positioning system. As the signal to noise power ratio gets higher, positioning errors decrease since noise becomes less effective. Calculation of signal to noise power ratio as a function of communication distance provides important guidelines for the system design. And the performance of a positioning system also depends heavily on the channel model. As a result of the analysis, it was found that the performance of the received signal to noise power ratio according to the communication distance was better in the LOS channel environment than in the Non LOS(line of sight) channel environment. And as the symbol interval of the preamble signal increases at a specific communication distance, the channel capacity of the UWB system increases.

• Atmosphere
• /
• v.32 no.1
• /
• pp.27-37
• /
• 2022

The Korean Integrated Model (KIM) forecast system was extended to assimilate Horizontal Line-Of-Sight (HLOS) wind observations from the Atmospheric Laser Doppler Instrument (ALADIN) on board the Atmospheric Dynamic Mission (ADM)-Aeolus satellite. Quality control procedures were developed to assess the HLOS wind data quality, and observation operators added to the KIM three-dimensional variational data assimilation system to support the new observed variables. In a global cycling experiment, assimilation of ALADIN observations led to reductions in average root-mean-square error of 2.1% and 1.3% for the zonal and meridional wind analyses when compared against European Centre for Medium-Range Weather Forecasts (ECMWF) Integrated Forecast System (IFS) analyses. Even though the observable variable is wind, the assimilation of ALADIN observation had an overall positive impact on the analyses of other variables, such as temperature and specific humidity. As a result, the KIM 72-hour wind forecast fields were improved in the Southern Hemisphere poleward of 30 degrees.

• The Journal of Society for e-Business Studies
• /
• v.17 no.3
• /
• pp.1-14
• /
• 2012

As the techniques of electronic and information are advancing, the computing power of a smart phone is becoming more powerful and the storage capacity of a smart phone is becoming larger. As the result, various new useful services are becoming available on smart phones. The context-aware service and mobile augmented reality have recently been the most popular research topics. For those newly developed services, identifying the object in the picture taken by the camera on the phone performs an extremely important role. So, many researches of identifying pictures have been published and most of them are based on the time consuming image recognition techniques. On the contrary, this paper introduces a very fast and effective method of identifying the objects on the photo making use of the sensor data obtained from the smart phone and electronic maps. Our method estimates the line of sight of the camera with the location and orientation information provided by the smart phone. Then it finds any element of the map which intersects the line of sight. By investigating those intersecting elements, our method identifies the objects on the photo.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.725-730
• /
• 2010

Preparing the conversion to the digital broadcasting system, we are deciding broadcasting network plan and interference protection area, using the measured receiving electric field level from the digital broadcasting station. However, the essential researches are needed about a receiving electric field level, because a digital TV (DTV) broadcasting receiver has been improved and an actual receiving environment should be considered. In this paper, the measured data were classified with domestic terrain of line of sight (LOS) and those of non-LOS, and effective receiving electric field level was proposed based on the LOS data. It is known that receiving electric field-level of 48 ㏈uV/m or more should be required for receiving rate of 90% and 50 ㏈uV/m for that of 95%, on the basis of the information of domestic terrain LOS.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.6
• /
• pp.20-26
• /
• 2008

Today, there are many high speed data access systems that provide the truly "anytime and anywhere" services. Especially, HSDPA (High Speed Data Packet Access), one of the main third generation mobile communication systems, provides 14.4Mbps maximum data throughput. However, HSDPA will fail to provide high data throughput in hostile multipath fading environments due to lack of LOS (Line of Sight). HAPS (High Altitude Platform Station) is one of the solutions to this problem. HAPS system not only provides Los, but it can also provide high data rate services to the conventional terrestrial systems. This paper proposes HAPS-HSDPA system model and compares performance of HSDPA and HAPS-HSDPA.