• 전력전자학회논문지
• /
• 제18권4호
• /
• pp.387-396
• /
• 2013

This paper investigates the droop control of parallel inverters for an islanded mode of microgrid. Frequency and voltage droop control is one of power control and load demand sharing methods. However, although the active power is properly shared, the reactive power sharing is inaccurate with conventional method due to the unequal line impedances and the power coupling of active - reactive power. In order to solve this problem, an improved droop method with virtual inductor concept and a voltage and current controller properly designed have been considered and analyzed through the PSiM simulation. The performance of improved droop method is analyzed in not only low-voltage line but also medium voltage line.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.57-64
• /
• 2013

The functional characteristic of LISN circuit, which is used for measurements of conductive noise in mains power line, is basically related to frequency characteristics of passive elements like inductors used in the circuit as well as the frequency response of inductors is highly related to the resins used in the varnishing process. The significant problem in determination of an inductor's frequency characteristic is the intrinsic resistance, inductance and parasitic capacitance. In this triplet, the parasitic capacitance is the major limiting factor of inductor's frequency range. This capacitance depends on inductor design parameters and materials filling the spaces of coil like resin and its coherency after curing process. In this paper, two similar inductors were designed and built. The first inductor was not varnished while the second one was varnished with VPI technology. VPI, or Vacuum, Pressure, Impregnation technology is one of the most reliable methods performing good insulating conditions for electrical circuits and windings based on resins. The measured results show that implying varnishing technology does not significantly affect the frequency response. However, due to mechanical solidity aspects and improved environmental protection, it is better to varnish the inductors.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.78-85
• /
• 2015

This paper presents a new structure of single-stage flyback power factor correction (PFC) converter with a controllable coupled negative magnetic feedback (NMF) winding. NMF winding is used to reduce the bulk capacitor voltage at high line voltages and light loads. However, it would cause line current distortion at zero crossing condition. In the proposed circuit, a series winding is used with NMF inductor to eliminate the NMF inductor at low line voltages. As a result, the dead angle of the input current, near zero voltage crossing, is eliminated and the power factor is increased. The presented experimental results of the proposed PFC converter confirm the integrity of the new idea and the theoretical analysis.

• 전력전자학회논문지
• /
• 제16권3호
• /
• pp.250-257
• /
• 2011

본 논문은 병렬 삼상 부스트 컨버터에서 Interleaved PWM에 의해 발생하는 고 주파수 순환전류를 효과적으로 저감시키기 위해서, AC 입력단에 연결되는 삼상 결합 인덕터의 특성을 분석하였다. 제시된 삼상 결합 인덕터 분석은 삼상 결합 인덕터의 구조와 전압 방정식의 해석을 통하여 이루어졌다. 그리고 이것을 바탕으로 기존의 저 주파수 평균화 모델에 삼상 결합 인덕터를 추가하여, 고 주파수 순환전류와 저 주파수 순환전류를 동시에 저감시킬 수 있는 새로운 형태의 평균화 모델을 제안하였다. 새로운 평균화 모델의 영상성분을 이용하면, 삼상 결합 인덕터와 라인 인덕터의 순환전류에 대한 총 인덕턴스를 각각 구해 비교 할 수 있다. 시뮬레이션과 실험결과를 토대로 병렬 삼상 부스트 컨버터에서 사용되는 삼상 결합 인덕터의 유용성을 검증하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 춘계학술대회 학술발표 논문집
• /
• pp.187-190
• /
• 2000

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and synchronizations of a power line are investigated. Since the synchronization of the power line system is impossible by coupled synchronization, theory having both the drive-response and the coupled synchronization is proposed. As a result, the chaos synchronization has delay characteristics in the power line transmission system caused by the line parameters L and C.

• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.826-831
• /
• 2009

In this paper, a high power RF amplifier module using AlN substrate of high thermal conductivity has been proposed. This RF amplifier module has the advantage of compact size and effective heat dissipation for the packaging of high power chip. To fabricate the thru-hole and scribing line on AlN substrate, the key parameters of $CO_2$ laser were experimented. And then, microstrip lines and spiral planar inductors were fabricated on an AlN substrate using the thin-film process. The fabricated microstrip lines on the AlN substrate has an attenuation value of 0.1 dB/mm up to 10 GHz. The fabricated spiral planar inductor has a high quality factor, a maximum of about 62 at 1 GHz for a 5.65 nH inductor. Packaging of a RF power amplifier was implemented on an AlN substrate with thru-hole. From the measured results, the gain is 24 dB from 13 to 15 GHz and the output power is 33.65 dBm(2.3 W).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.883-886
• /
• 2004

The current harmonic detector consists of the load current detector and the notch filter. It obtains the harmonic current from the output of the load current detector using the Notch filter. The GIC in the notch filter is used instead of inductor to minimize the magnitude and phase characteristics variation caused by using twin-T notch filter and passive elements(inductor).

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권1호
• /
• pp.56-58
• /
• 2002

A closed form expression for the quality factor of the spiral inductor, methodologically, is presented as a function of the inductance ($L_{ind}$), metal-line width (W), spacing (S), inner and the diameter ($D_i$). For a given inductance, the dependences of quality factor on W, S, and $D_i$ are analyzed, and suggested the design optimization guidelines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2404-2406
• /
• 2000

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and synchronizations of a T or ${\pi}$ type power line are investigated. Since the synchronization of the power line system is impossible by coupled synchronization, theory having both the drive-response and the coupled synchronization is proposed. As a result, the chaos synchronization has delay characteristics in the power line transmission system caused by the line parameters L and C

• 한국ITS학회 논문지
• /
• 제7권2호
• /
• pp.50-55
• /
• 2008

본 논문에서는 단락점과 접지면 사이에 집중형 소자인 인덕터를 이용하여 안테나의 입력 임피던스와 공진주파수 모두를 선택 가능한 다중 대역 내장형 안테나를 제안하였다. 제안된 안테나의 구조는 PIFA (Planar Inverted F Antenna)구조와 반파장 로디드 라인 구조의 합성으로 전체적으로 두 개의 단락점과 하나의 급전점을 가지며 그 중 하나의 단락점을 공유한다. 설계된 안테나의 동작 주파수 대역은 PIFA 구조에서 GSM ($880\;{\sim}\;960MHz$), GPS ($1575{\pm}10MHz$)이며 반파장 로디드 라인 구조에서의 인덕터의 값을 2.2nH, 3.3nH, 4.7nH로 변화시킴에 따라 제안된 안테나는 DCS ($1710{\sim}1880MHz$), US-PCS ($1850{\sim}1990MHz$), 그리고 W-CDMA ($1920{\sim}2170MHz$) 대역에서 동작한다. 공유된 단락점에서의 인덕터 값을 1.2nH, 3.9nH, 6.8nH로 변화시킴으로서 안테나의 입력 임피던스를 변화시켰으며 집중형 소자의 추가로 생기는 안테나의 이득 변화를 최소화하기 위해 사용되는 인덕터의 값을 최대 6.8nH로 제한하였다. 제안된 안테나의 최대 이득은 GSM 대역에서 1.60dBi, GPS 대역에서 -1.16dBi DCS/US-PCS/W-CDMA 대역에서 1.41dBi로 측정되었다.