• Transactions of Materials Processing
• /
• v.15 no.6 s.87
• /
• pp.459-466
• /
• 2006

Trimming line design plays an important role in obtaining accurate edge profile after flanging. Compared to the traditional section-based method, simulation-based method can produce more accurate trimming line by considering deformation mechanics. Recently, the use of a finite element inverse method is proposed to obtain optimal trimming line. By analyzing flanging inversely from the final mesh after flanging, trimming line can be obtained from initial mesh on the drawing die surface. Initial guess generation fer finite element inverse method is obtained by developing the final mesh onto drawing tool mesh. Incremental development method is adopted to handle irregular mesh with various size and undercut. In this study, improved incremental development algorithm to handle complex shape is suggested. When developing the final mesh layer by layer, the algorithm which can define the development sequence and the position of developing nodes is thoroughly described. Flanging of front fender is analyzed to demonstrate the effectiveness of the present method. By using section-based trimming line and simulation-based trimming line, incremental finite element simulations are carried out. In comparison with experiment, it is clearly shown that the present method yields more accurate edge profile than section-based method.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.36-36
• /
• 2003

In the present study, growth performances of the offspring from selected brood line were compared to those of the offspring from non-selected brood line of red sea bream. Offspring groups were mass produced separately from two brood lines, selected and non-selected Korean strain. Selected brood line have been selected by fish size for four generations (upper 5∼30% per generation) and non-selected brood line is the second generation of wild population at south sea in Korea. There's no significant difference in body length between offspring from selected and non-selected brood line during early growing stage (until 96-days old). However, offspring from selected brood line had superior body weight growth than offspring from non-selected brood line. At sea cages rearing trials with communal stocking, Offspring from selected brood line showed significantly better performance in body weight, body length, weight gain, specific growth rate and feed consumption (but not in feed conversion ratio) than offspring from non-selected brood line. At 24 months old, offspring from selected brood line grew faster 1.10 times in body length and 1.41 times in body weight than offspring from non selected brood line. The response to selection when compared to a non-selected line is on average of 10% in weight per generation at 24 months old.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.59-68
• /
• 2015

PURPOSES : This study suggests the application of glow line marking technology for reducing traffic accidents at nighttime. METHODS : In this study, using a statistical analysis, we analyzed the characteristics of traffic accidents occurring at nighttime. Next, the strength, weakness, opportunity, and threat (SWOT) factors were derived based on a current-status analysis of glow line marking technology and road environments. An SO strategy, ST strategy, WO strategy, and WT strategy were established in accordance with the four SWOT factors. RESULTS : This study suggests that the following strategies should be promoted to apply glow line marking technology to a road environment: 1) an activation strategy for the technological development of glow line markings for a new paradigm in reducing traffic accidents, 2) a benefit enhancement strategy applying glow line marking technology in places where nighttime traffic accidents frequently occur, 3) a strategy for the expansion of glow line marking by replacing streetlights, and 4) a strategy for enhancing road applications through the development of various line marking methods in consideration of both performance and costs. CONCLUSIONS : The application of glow line markings in a road environment can contribute to a reduction of traffic accidents at nighttime, and aid energy savings from the replacement of streetlights.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.892-900
• /
• 1998

This study was done to analyze the surface development of upper arm for planning sleeve armhole line. The major conclusions of this study are: 1. The surface development by arm movements made the expansion and contraction of upper arm surface changes easily visible. Armhole lines of 90$^{\circ}$and 135$^{\circ}$~180$^{\circ}$movements deviated from those of standard posture. 2. According to regression analysis, armhole lines on the upper arm were adapted to sleeve patten, following the axillary circumference line changed to biceps line. Sleeve cap length ranged from armhole/4+2.5cm to armhole/4$\pm$0.5cm. 3. Compared to Rim's pattern method, ascending and descending amounts of armhole lines were represented as fixed values.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.376-384
• /
• 1999

In this paper, we introduce the on-line test plan of high speed rail development, which will be carried out at the test section of Seoul-Pusan high speed line from May to October, 2002. The test items are decided focused on the verification of the perofrmace and acquirement of the technical data of the high speed rail system development. The running time and distance of the train are calculated for several limited maximum speed cases. The detailed test scenario shall be developed according to the process of development and design of the system.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.891-899
• /
• 2009

We need education program and contents that satisfy on-off line's education maximize an initiative spirit development in an absence of UI design for infants and elementary students. For the multiplicity of inflection of these initiative spirit development education program, we need development of contents and teaching materials(Cre-kids) that can educate both in on-line and in off-line. Cre-kids are divided of four areas that are increased fluency, flexibility, originality and delicacy. Four areas are ideas of language, visual, making and computer. Through each area, we can develop children's systematic modeling idea ability. And we divide of fluency, flexibility, originality and delicacy each four areas and evaluate each aspect and mark for index. That is CDQ(Creativity Design Quotient). Through the evaluation result, we will be able to study about a modeling initiative spirit index.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.6
• /
• pp.377-382
• /
• 2013

A convergence software development methodology based on product line engineering provides an architecture model for application development and it also provides workflow as a behavior specification of control component development to develop transaction centric application. To effect a change on software development based on product line engineering it has to be supported by a tool. But almost workflow modeling tools dose not support product line engineering concept. So we need new workflow modeling tool to support the convergence software development methodology. In this paper, we introduce a toolset for workflow modeling that consists of eclipse plug-in applications and open source tool and describe the relationships of tools through example.

• Journal of Software Engineering Society
• /
• v.29 no.2
• /
• pp.1-6
• /
• 2020

Software product line development is a development paradigm that efficiently develops a product family by avoiding redundant development based on separation of the common part and the variable part of the product family. In software product line development, the source code that is used to produce a product family is called a product line code base, and when the product line code base is changed and the products of the product family are affected by the change, the activity of testing the affected products is called a product line regression testing. For product line regression testing, instead of conducting regression testing individually on each product of the product family, a more efficient regression testing would be possible if unnecessary testing that are irrelevant to the change can be avoided. This paper introduces SRTS, which is an automated method to efficiently perform software product line regression testing. SRTS divides the product line code base and test cases based on commonality and variability. Then SRTS identifies and selects the test cases affected by the change. Finally, it reduces unnecessary testing by rerunning only the selected test cases.

• The Journal of Society for e-Business Studies
• /
• v.22 no.2
• /
• pp.39-60
• /
• 2017

Software product line engineering is widely recognized as an effective way for systematic software reuse, and many studies have been conducted to convert existing software development practices and processes into software product line. In order to convert existing software development into product line, a lot of investments are required such as dedicated development units, appropriate process selection and adaptation, and tool support. In particular, small businesses need business cases and specific practices for applying software product line engineering before its full-scale adoption. In this paper, we present a practical case of applying software product line engineering to the development of web system families and a process of systematically building and reusing software assets. To do this, we analyzed a number of web development projects and presented the experiences and various considerations of small software companies adopting software product line.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.205-205
• /
• 2022

Sorghum (Sorghum bicolor L.) is a major cereal grain crop of the world and It can be cultivated under high temperature and dry condition with high adaptability to the adverse environment. It is usually eaten with rice in korea and most of domestic sorghum cultivars have been developed by pure line selection and cross breeding. In prior studies, Hybrid cultivar (F1 seed) was known to improve 30-40% in yield and resist to disease and pest than pure line varieties due to hybrid vigor. Therefore, study on the hybrid sorghum is continuously necessary. In korea, hybrid sorghum cultivar have been developed, so we need to find methods seed production technology for supply and commercialization of hybrid seed cultivar. Female inbred line(A-line) and male inbred line(R-line) are needed for hybrid seed production. This study was carried out to investigate growth characteristics and yield of hybrid sorghum according to the seedling period and planting rate between female inbred line(YSA1) and male inbred line (Sodamchal, Miryang 19). When the flowering period of two inbred groups in the process of hybrid seed production is coincides, hybrid seed production is increase. The female inbred line and male inbred lines were cultivated at Daegu in 2021. Two inbred lines were sown at intervals of 3 days and 7days and were evaluated flowering period. As a result, the flowering period of the female inbred line and male inbred lines were matched at the 7days interval. To find out optimal planting rate, two inbred lines were cultivated under different plating rate (4:2, 5:2, 6:2). Yield of YSA1/Sodamchal(F1) was the highest 130(kg/10a) in the 4:2 ratio and yield of YSA1/Miryang 19 was the highest quantity of 139(kg/10a) in the 6:2 ratio. The results of this study could be helpful for hybrid Sorghum seeds production.