• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.803-808
• /
• 2000

This paper presents development of a different substance monitoring system base reliable detection between the conveyer belt and hopper used for materials transport line of steel company. Conventional detection method of a piece of iron separation system is losed the confidence, because of the place with bad surroundings of measurement so much that materials production line are completely exposed to dust, moisture and vibration. For the solution of this problem, we developed a different substance detection system using the acoustic emittion sensor and one chip microprocessor which is available for bad surroundings and inexpensive. The reliability of the system was estimated by experiment.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.424-430
• /
• 2008

A new active vibration measurement system in electric power transmission line is presented, using in the nondestructive test. With a permanent magnet and a couple of coils, the system exerts impact force to a test object and in turn picks up the vibration of the object. The natural frequency with the amplitude obtained from the system are used as a basis for the detection of defects in the object. The system is controlled by an electronic device designed to facilitate the fully automated testing process with consistent repeatability and reliability which are essential to the nondestructive test. The system is expected to be applied to the wide area of defect detection including the classification of mechanical parts in production and inspection processes.

• Journal of Digital Convergence
• /
• v.11 no.2
• /
• pp.115-125
• /
• 2013

Unexpected consumer dissatisfaction emerges through rapid growth and expansion of on-line shopping channel. This research focused on the fashion online retail channels' negative aspect caused by service failure which possibly disappointed consumers. We also tried to seek for appropriate service recovery types based on frequently offered recovery types on-line. Data from college students were analyzed. Results indicate that fitting problem, insufficient information, product defect, inventory problem and slow delivery were the main service failure types in apparel e-shopping. Regression analysis identified that among these types, insufficient information, product defect, and slow delivery had significant influence on channel satisfaction after post recovery effort. Results also confirmed significant relationships between channel satisfaction and channel switching. Consumers perceived benefit level causes overall channel satisfaction level to rise while perceived risk leads to lower level of channel satisfaction. Choosing desirable service recovery activities in each service failure situations is necessary in order to raise consumer's channel satisfaction in online apparel shopping.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.23-23
• /
• 2011

Chemical-Mechanical Planarization (CMP) 공정이란 화학적 반응 및 기계적인 힘이 복합적으로 작용하여 표면을 평탄화하는 공정이다. 이러한 CMP 공정은 반도체 산업에서 회로의 고집적화와 다층구조를 형성하기 위하여 도입되었으며 반도체 제조를 위한 필수공정으로 그 중요성이 강조되고 있다. 특히 최근에는 Inter-Level Dielectric (ILD)의 형성과 Shallow Trench Isolation (STI) 공정에서실리콘 산화막을 평탄화하기 위한 CMP 공정에 대해 연구가 활발히 이루어지고 있다. 그러나 CMP 공정 후 scratch, pitting corrosion, contamination 등의 Defect가 발생하는 문제점이 존재한다. 이 중에서도 scratch는 기계적, 열적 스트레스에 의해 생성된 패드의 잔해, 슬러리의 잔유물, 응집된 입자 등에 의해 표면에 형성된다. 반도체 공정에서는 다양한 종류의 실리콘 산화막이 사용되고 gks이러한 실리콘 산화막들은 종류에 따라 경도가 다르다. 따라서 실리콘 산화막의 경도에 따른 CMP 공정 및 이로 인한 Scratch 발생에 관한 연구가 필요하다고 할 수 있다. 본 연구에서는 scratch 형성의 거동을 알아보기 위하여 boronphoshposilicate glass (BPSG), plasma enhanced chemical vapor deposition (PECVD) tetraethylorthosilicate (TEOS), high density plasma (HDP) oxide의 3가지 실리콘 산화막의 기계적 성질 및 이에 따른 CMP 공정에 대한 평가를 실시하였다. CMP 공정 후 효율적인 scratch 평가를 위해 브러시를 이용하여 1차 세정을 실시하였으며 습식세정방법(SC-1, DHF)으로 마무리 하였다. Scratch 개수는 Particle counter (Surfscan6200, KLA Tencor, USA)로 측정하였고, 광학현미경을 이용하여 형태를 관찰하였다. Scratch 평가를 위한 CMP 공정은 실험에 사용된 3가지 종류의 실리콘 산화막들의 경도가 서로 다르기 때문에 동등한 실험조건 설정을 위해 동일한 연마량이 관찰되는 조건에서 실시하였다. 실험결과 scratch 종류는 그 형태에 따라 chatter/line/rolling type의 3가지로 분류되었다 BPSG가 다른 종류의 실리콘 산화막에 비해 많은 수에 scratch가 관찰되었으며 line type이 많은 비율을 차지한다는 것을 확인하였다. 또한 CMP 공정에서 압력이 증가함에 따라 chatter type scratch의 길이는 짧아지고 폭이 넓어지는 것을 확인하였다. 본 연구를 통해 실리콘 산화막의 경도에 따른 scratch 형성 원리를 파악하였다.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1752-1759
• /
• 2007

In the new Seoul-Busan high speed railroad construction specially city center passage roadbed establishment is recommended the staibility for the existing subway tunnel segments of Busan subway line No. 1 and No.2. regarding the appearance condition, a quality condition and the durability of the objective facility site exact inspection, and it evaluates the numerical analysis which uses MIDAS GTS it leads and there is the objective of the place where the stability of the objective facility and this tunnel it investigates. To immediacy of the on-the-spot inspection result whole facility it is a condition where the reinforcement which is simple not to be hindrance is necessary, 2nd Line case it is a condition which transfer is good but the general defect and the damage which occur from the tunnel of NATM type were confirmed part. While roadbed establishment constructing that the continuous maintenance is necessary, it is judged. The result of 1st, 2nd Line maximum sinkage, unequal sinkage and the lining stress of numerical analysis are within permission and the damage degree is appearing with the fact that the degree it will can disregard it is slight. But it enforces necessary Pre-grouting in order to minimize an actual tunnel face conduct and when the tunnel is excavated it is judged with the fact that necessary to minimize the outflow possibility.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.45-51
• /
• 2012

Multilayer co-extrusion blown film construction is a popular technique for producing plastic films for various packaging industries. Automated detection of defective films can improve the quality of film production process. In this paper, we propose a film inspection system that can detect and classify film defects robustly. In our system, first, film images are acquired through a high speed line-scan camera under an appropriate lighting system. In order to detect and classify film defects, an inspection algorithm is developed. The algorithm divides the typical film defects into two groups: intensity-based and texture-based. Intensity-based defects are classified based on geometric features. Whereas, to classify texture-based defects, a texture analysis technique based on local binary pattern (LBP) is adopted. Experimental results revealed that our film inspection system is effective in detecting and classifying defects for the multilayer co-extrusion blown film construction line.

• Journal of Institute of Convergence Technology
• /
• v.6 no.1
• /
• pp.23-26
• /
• 2016

DC motor shafts have several defects such as double cut, deep scratch on surface, and defects in diameter and length. The deep scratches are due to collision among the other shafts. So the scratches are long and thin but their orientations are random. If the smallest enclosing box, i.e. oriented bounding box for a detective point group is found, then the size of the corresponding defect can be modeled as its diagonal length. This paper proposes an suface inspection algorithm for the DC motor shaft using the oriented bounding box. To evaluate the proposed algorithm, a test bed is made with a line scan CCD camera (4096 pixels/line) and two rollers mechanism to rotate the shaft. The experimental result on a pre-processed image with contrast streching algorithm, shows that the proposed algorithm sucessfully finds 150 surface defects and its computation time (0.291 msec) is enough fast for the requirement (4 seconds).

• Archives of Craniofacial Surgery
• /
• v.20 no.4
• /
• pp.255-259
• /
• 2019

Craniofacial cleft is a rare disease, and has multiple variations with a wide spectrum of severity. Among several classification systems of craniofacial clefts, the Tessier classification is the most widely used because of its simplicity and treatment-oriented approach. We report the case of a Tessier number 3 cleft with wide soft tissue and skeletal defect that resulted in direct communication among the orbital, maxillary sinus, nasal, and oral cavities. We performed soft tissue reconstruction using the straight-line advanced release technique that was devised for unilateral cleft lip repair. The extension of the lateral mucosal and medial mucosal flaps, the turn over flap from the outward turning lower eyelid, and wide dissection around the orbicularis oris muscle enabled successful soft tissue reconstruction without complications. Through this case, we have proved that the straight-line advanced release technique can be applied to severe craniofacial cleft repair as well as unilateral cleft lip repair.

• Korean Journal of Legislative Studies
• /
• v.25 no.2
• /
• pp.69-101
• /
• 2019

The purpose of this study is to verify that voting behavior of congressmen can vary depending on the different candidate selection methods of political parties. Specifically, this paper examines whether congressmen elected through a primary tend to deviate from the party line vote in the floor voting, compared to those who did not. As a result, it was founded that congressmen who went through competition of the primary are more likely to defect from the party line vote than who did not. This empirical evidence suggests that if the introduction of the open primary system is further expanded in the future, it may lead to weakening of party cohesion and reinforcing lawmakers' autonomy.

• Archives of Craniofacial Surgery
• /
• v.21 no.1
• /
• pp.35-40
• /
• 2020

Background: Extensive eyelid defects are extremely challenging to reconstruct. Although numerous procedures for reconstructing periorbital defects have been proposed, no method is universally used. However, the Tenzel flap is the most commonly used technique to reconstruct eyelid defects affecting one-third to two-thirds of the eyelid. Methods: Recognizing the usefulness of the Tenzel method, we adapted it to reconstruct larger defects around the eyes. Seven patients underwent reconstruction with a modified Tenzel flap with an extended concept after wide excision of a malignant skin lesion. The main difference from the conventional method is that the modified Tenzel flap includes the medial portion of the lower lid defect. The design of a modified Tenzel flap begins as a semicircle at the lateral canthal area, in the same way as a classical Tenzel flap, and extends medially along the subciliary line to cover the defect on the medial lower eyelid. The follow-up time ranged from 3 to 28 months. Results: All flaps survived and healed well, with minimal scarring and natural palpebral outlines. Conclusion: Compared to traditional procedures, the modified Tenzel flap has several advantages, including a one-stage operation, a less noticeable scar, and effective prevention of complications such as lower eyelid ectropion.