• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.267-275
• /
• 2015

Port Logistics Industry plays a crucial role in trade creating added value, and contributes greatly in economic growth of a nation. Multitude of studies have been conducted to develop this industry as a means of intensifying national competitiveness. In line with this trend, this study aims to examine the effect of the Port Logistics Industry on the regional economy focusing on Ulsan, and also compare the industry among five port cities by using Korean Standard Industrial Classification (KSIC) Rev. 9 and 2010 Economy Census. The results of this study demonstrate that the Port Logistics Industry has significant regional employment rate and economic importance, showing the high number of workers (11.7%) and sales (13.1%) in 2010. According to the comparison among five port cities between 2007 and 2011, the increase of annual average in the number of companies of Gwangyang (5.72%) and Ulsan (4.23%) is higher than the national average (1.74%), and Ulsan (23.82%) and Pyeongtaek (25.74%) show high increase of annual average in the number of workers.

• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.167-181
• /
• 2020

Analysis of variance (ANOVA) and multiple comparison analysis were performed for shear strengths categorized by breccia content of 5 wt.% (Case-I), 10 wt.%, (Case-II) and 15 wt.% (Case-III) in fault cores. The relationship between breccia contetnt and shear strength was quantitatively classified by calculating the mean and standard deviation of shear strength for each population in each case and then the grouping the breccia contents that had a statistically similar effect on the dispersion of shear strength. As a result, shear strength was clearly classified into group 1 (breccia content of 0-15 wt.%) and group 2 and 3 (breccia coantent of 15-30 wt.% and 30 wt.% or more) in Case-III. Shear strength of the standard line at breccia content of 15 wt.% were determined to be 43.6 kPa, 77.6 kPa, and 118.6 kPa at each normal stress (54 kPa, 108 kPa, and 162 kPa), respectively. In addition, the distribution range of cohesions is 0-43.6 kPa at breccia content of 15 wt.% or less, and 0-70.0 kPa at 15 wt.% or more. Distribution range of friction angles is 0-45.7 ° at breccia content of 15 wt.% or less, and 16.7-57.5 ° at 15 wt.% or more.

• Science of Emotion and Sensibility
• /
• v.12 no.4
• /
• pp.433-442
• /
• 2009

People are tending to buy products through the Internet rather than purchasing them from the store. Some of the consumers give their feedback on line such as reviews, replies, comments, and blogs after they purchased the products. People are also likely to get some information through the Internet. Therefore, companies and public institutes have been facing this situation where they need to collect and analyze reviews or public opinions for them because many consumers are interested in other's opinions when they are about to make a purchase. However, most of the people's reviews on web site are too numerous, short and redundant. Under these circumstances, the emotion scanning system of text documents on the web is rising to the surface. Extracting writer's opinions or subjective ideas from text exists labeled words like GI(General Inquirer) and LKB(Lexical Knowledge base of near synonym difference) in English, however Korean language is not provided yet. In this paper, we labeled positive, negative, and neutral attribute at 4 POS(part of speech) which are noun, adjective, verb, and adverb in Korean dictionary. We extract construction patterns of emotional words and relationships among words in sentences from a large training set, and learned them. Based on this knowledge, comments and reviews regarding products are classified into two classes polarities with positive and negative using SO-PMI, which found the optimal condition from a combination of 4 POS. Lastly, in the design of the system, a flexible user interface is designed to add or edit the emotional words, the construction patterns related to emotions, and relationships among the words.

• Journal of Animal Science and Technology
• /
• v.54 no.5
• /
• pp.375-379
• /
• 2012

This study was carried out to define the "Wolla" coat color using 376 Jeju registered horses (white patched 142, solid coat color 234). Three major factors related to the white patches i.e ECA3-inversion for Tobiano, EDNRB 2 bp nucleotide substitution for frame Overo, and the KIT intron 16 single nucleotide polymorphism (SNP) for Sabino types of coat color were analyzed. It was found that out of 142 Jeju horses with white patches that have the genotype for ECA3-inversion (To) 140 horses were +/To heterozygous and 2 horses were To/To homozygous all Jeju horses with white patches had ECA3-inversion allele. However, there was no frame Overo or Sabino allele type in EDNRB and KIT intron 16 SNP in Jeju horses with white patches. As for 234 Jeju horses with a solid coat color, there was no ECA3-inversion allele related to the white patches. Thus, it could be considered that Wolla coat color with white patches in Jeju horses might have come from the Tobiano line in the genetic classification by coat color.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.413-428
• /
• 2013

Purpose: The purpose of this study was to evaluate students and optometrist opinion of the usefulness of different subjects of optometry curriculum.This date will then be used as base-line data during a process of curriculum development Methods: 292 of ophthalmic optic's students and 123 of optometrists were surveyed in the usefulness of curriculum (five-point scale) followed by statistical analysis of the results. Results: Optometrists gave a higher average score for curriculum usefulness (3.89) than the students (3.71). The subject which showed the highest usefulness for the student was optometry (4.55) but clinical practice was the highest for the optometrist (4.48). There was significant differences (p<.05) on optics, ophthalmology, basic science, optometrist related subject and foreign language but optometry and contact lenses showed high usefulness in common without significant difference. The usefulness of subject for the student showed significant difference according to gender, grade, age, and desired working place and has demonstrated significant difference depend on gender, age, scholarship, total working experience as an optometrist, workplace, and position for optometrists as well. Conclusions: It is necessary to continue research for the development of standard and bench-marked curriculum for ophthalmic optics and also the curriculum, which reflecting the usefulness and needs obtained from ophthalmic optics' students and optometrists need to be developed.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.108-113
• /
• 2006

Urban conditions, such as existing underground facilities and ambient noise due to cultural activity, restrict the general application of conventional geophysical techniques. At a tunnelling site in an urban area along an existing railroad, we used the refraction microtremor (REMI) technique (Louie, 2001) as an alternative way to get geotechnical information. The REMI method uses ambient noise recorded by standard refraction equipment and a linear geophone array to derive a shear-wave velocity profile. In the inversion procedure, the Rayleigh wave dispersion curve is picked from a wavefield transformation, and iteratively modelled to get the S-wave velocity structure. The REMI survey was carried out along the line of the planned railway tunnel. At this site vibrations from trains and cars provided strong seismic sources that allowed REMI to be very effective. The objective of the survey was to evaluate the rock mass rating (RMR), using shear-wave velocity information from REMI. First, the relation between uniaxial compressive strength, which is a component of the RMR, and shear-wave velocity from laboratory tests was studied to learn whether shear-wave velocity and RMR are closely related. Then Suspension PS (SPS) logging was performed in selected boreholes along the profile, in order to draw out the quantitative relation between the shear-wave velocity from SPS logging and the RMR determined from inspection of core from the same boreholes. In these tests, shear-wave velocity showed fairly good correlation with RMR. A good relation between shear-wave velocity from REMI and RMR could be obtained, so it is possible to estimate the RMR of the entire profile for use in design of the underground tunnel.

• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.36-50
• /
• 2015

The purpose of this study is to assign emission source profiles of volatile organic compounds (VOCs) and particulate matters (PMs) for chemical speciation, and to correct the temporal allocation factor and the chemical speciation of source profiles according to the source classification code within the sparse matrix operator kernel emission system (SMOKE) in the Seoul metropolitan area. The chemical speciation from the source profiles of VOCs such as gasoline, diesel vapor, coating, dry cleaning and LPG include 12 and 34 species for the carbon bond IV (CBIV) chemical mechanism and the statewide air pollution research center 99 (SAPRC99) chemical mechanism, respectively. Also, the chemical speciation of PM2.5 such as soil, road dust, gasoline and diesel vehicles, industrial source, municipal incinerator, coal fired, power plant, biomass burning and marine was allocated to 5 species of fine PM, organic carbon, elementary carbon, $NO_3{^-}$, and $SO_4{^2-}$. In addition, temporal profiles for point and line sources were obtained by using the stack telemetry system (TMS) and hourly traffic flows in the Seoul metropolitan area for 2007. In particular, the temporal allocation factor for the ozone modeling at point sources was estimated based on $NO_X$ emission inventories of the stack TMS data.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.4
• /
• pp.193-205
• /
• 2003

There has been so many research activities about robot soccer system in the many research fields, for example, intelligent control, communication, computer technology, sensor technology, image processing, mechatronics. Especially researchers research strategy for attacking in the field of strategy, and develop intelligent strategy. Then, soccer robots cannot defense completely and efficiently by using simple defense strategy. Therefore, intention extraction of attacker is needed for efficient defense. In this thesis, intention extractor of soccer robots is designed and developed based on FMMNN(Fuzzy Min-Max Neural networks ). First, intention for soccer robot system is defined, and intention extraction for soccer robot system is explained.. Next, FMMNN based intention extractor for soccer robot system is determined. FMMNN is one of the pattern classification method and have several advantages: on-line adaptation, short training time, soft decision. Therefore, FMMNN is suitable for soccer robot system having dynamic environment. Observer extracts attack intention of opponents by using this intention exactor, and this intention extractor is also used for analyzing strategy of opponent team. The capability of developed intention extractor is verified by simulation of 3 vs. 3 robot succor simulator. It was confirmed that the rates of intention extraction each experiment increase.

• Journal of the Korean Society of Costume
• /
• v.52 no.2
• /
• pp.103-113
• /
• 2002

Heungdukwang'(興德王) costume ordinance(834A.D.) is a very important written historical record because it reveals Tongil Shills's(統一新羅) costume. But among the clothing pieces that appeared in Heundukwang'(興德王) costume ordinance, classification of Naeoe(內衣) and Danoe(短衣) is not clear. This study focuses on the categorization of Naeoe(內衣) and Danoe(短衣). Upper garments included among costume ordinance were Pyooe(表衣), Naeoe(內衣) and Danoe(短衣), Pyooe(表衣) and aeoe(內衣) were unisex, while Danoe(短衣) was worn only by women excluding the lower class. Pyooe(表衣) is applicable to Po(袍), Naeoe(內衣) is aplicable to Yu(유). Shilla'(新羅) upper garments appearing in visual records are as follows: -With the exception of Pyooe(表衣), the length of men's upper garments were between hip and knee length. These upper garments featured V-neck and round neck styles with the left side of the garments folded over the right side. -Again excluding Pyooe(表衣), women's upper garments were similar to men's upper garments having V-neck and round necklines. We know this to be true from the relics found during the excavations of Hwangsungdong and Yonggangdong, as well as from the women in the stone reliefs of Sangju. Although we know the shape of necklines. the length of upper garments remained a mystery because women of that tome tucked in their upper garments into the skirts and/or wore an over garment. However a clay doll found around Bulguksa(佛國寺) wearing a knee length garment with V-neck. The upper garment was opened in the front and was worn over another garment with same length and round neckline. At that time, The upper garments found in China and Japan. were not much different than those found in Shilla (新羅). They also included garments that were waist length, had peach-shaped necklines, or were worn over head. Shilla's(新羅) traditional upper garment was between hip and knee length, but with the introduction and influence of Chinese costume. upper garments with a length coming down to the high waist line began to appear. In addition to Chinese influence, because Shilla's(新羅) women wore the upper garment first and then the lower garment, a long upper garment was not necessary. These shorter upper garments came to be known as 'Danoe(短衣)'When we perceive clothing. we look at silhouette first and then the details. Silhouette is much determined by length and neckline or the front of the garment determines the details, So we need to attention to the basis of ancient dress classifications. These classifications were according to first length [Po(袍), Yu(유)] and then neckline [Danryoung(團領), Jingryoung(首領)]. As a result. Naeoe(內衣) and Danoe(短衣) are classified by the length. The length (內衣) was between hip and knee length while Daneoe(短衣) was waist length. Danoe(短衣) was worn by putting the bottom of it inside skirt naeoe(內衣) was worn over a skirt or plant. But both had V-neck and round neck styles, and styles with the left side of the garments folded over the right side.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.4
• /
• pp.89-102
• /
• 2004

The generated blasting pressure wave initiated under decoupled-charge condition is a function of peak blasting pressure, rise time, and wave-shape function. The peak blasting pressure and the rise time are also the function of explosive and rock properties. The probabilistic distributions of explosive and rock properties are derived from the results of their property tests. Since the probabilistic distributions of explosive and rock properties displayed a normal distribution, the peak blasting pressure and the rise time can also be regarded as a normal distribution. Parameter analysis and uncertainty analysis were performed to identify the most influential parameter that affects the peak blasting pressure and the rise time. Even though the explosive properties were found to be the most influential parameters on the peak blasting pressure and the rise time from the parameter analyses, the result of uncertainty analysis showed that rock properties constituted major uncertainties in estimating the peak blasting pressure and the rise time rather than explosive properties. Damage and overbreak of the remaining rock around the excavation line induced by blasting were evaluated by dynamic numerical analysis. A user-subroutine to estimate the rock damage was coded based on the continuum damage mechanics. This subroutine was linked to a commercial program called 'ABAQUS/Explicit'. The results of dynamic numerical analysis showed that the rock damages generated by the initiation of stopping hole were larger than those from the initiation of contour hole. Several methods to minimize those damages were proposed such as relocation of stopping hole, detailed subdivision of rock classification, and so on. It was found that fracture probability criteria and fractured zones could be distinctively identified by applying fuzzy-random probability.