• IE interfaces
• /
• v.12 no.3
• /
• pp.437-447
• /
• 1999

Modeling and system development for the fabrication process in the semiconductor manufacturing is presented in this paper. Maximization of wafer production can be achieved by the wafer flow balance under high utilization of bottleneck machines. Relatively simpler model is developed for the fabrication line by considering main characteristics of logistics. Simulation system is developed to evaluate the line performance such as balance rate, utilization, WIP amount and wafer production. Scheduling rules and input rules are suggested, and tested on the simulation system. We have shown that there exists good combination of scheduling and input rules.

• IE interfaces
• /
• v.17 no.3
• /
• pp.282-293
• /
• 2004

Line Balancing is the problem to assign tasks to stations while satisfying some managerial viewpoints. Most researches about the Mixed-Model Line Balancing problems are focused on the minimizing the total processing time or the number of workstations. Independently, some research reports consider the balance issues of the physical workloads on the assembly line. In this paper, we are presenting a new mathematical model to accomplish the line balance considering both the processing time and the workloads at the same time. To this, end, we propose an zero-one integer program problem, and we use the Chebyshev Goal Programming approach as the solution method. Some computational test runs are performed to compare the pay-offs between the processing time and the workloads. And, the test results show us that the reliable balanced work schedules can be obtained through the proposed model.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.120-130
• /
• 2014

The purpose of this study was to evaluate the effects of line dance activity on the balance factors during static standing to reveal the exercise intervention for fall prevention. A 15-week line dance programme was applied to 16 elderly females who aged more than 65 years in the community. Balance ability during static standing was evaluated by the range of center of pressure(cop), the velocity of cop, and sway area that calculated on the basis of ground reaction force data, forces, and moments. The range and velocity of cop in the anterio-posterior were significantly reduced after line dance(p<.01, p<.05, respectively), but change in those of cop in the medio-lateral was not found. It was demonstrated that 16-week line dance activities allow more effective in anterio-posterior stability and sway area of static standing. It was suggested that the effect of fall prevention exercise should be studied more associate with fall from vestibular and sensory system as future study.

• Nuclear Engineering and Technology
• /
• v.37 no.2
• /
• pp.167-176
• /
• 2005

We developed the PERUPS system to aid the on-line performance analysis for the turbine cycle of the YongGwang 3 and 4 nuclear power plants. Procedure of measurement validation is included in the performance calculation to obtain heat balance. Precision of on-line performance calculation is increased via practical modifications of standard calculation algorithms based on the PTC (Performance Test Code). The proposed system also provides useful Web-based aids for performance analysis, including performance data management, a graphic viewer for heat balance and turbine expansion lines, and synthesized reports of performance.

• PNF and Movement
• /
• v.11 no.2
• /
• pp.21-29
• /
• 2013

Purpose : The study was to evaluate the weight distribution, balance and gait function of stroke patients wearing lateral wedged insole to the shoe of the affected side. Methods : 27 patients with stroke (15 men, 12 women) participated in this study. Participants performed weight distribution, dynamic balance and gait ability with or without wedged insole on affected side in a random order. The balancia was used to evaluate the weight distribution. Deviation from the center line was analyzed by Dartfish during sit to stand to evaluate dynamic balance. The functional walk ability evaluated by 10 m walking velocity. Results : The asymmetry index of weight bearing improved significantly with wedged insole of affected side(p<.05). During sit to stand, center of gravity significantly moved from non-affected side to more mid line of body(p<.05). Improvement were shown in walking speed after wearing the wedged insole(p<.05). Conclusion : Wedged insole applied on affected side have a beneficial effect on weight distribution, dynamic balance and walking speed with stroke.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.109-118
• /
• 2013

The purpose of this study was to determine the effects of line dance programme on the balance ability during walking to reveal the exercise intervention for fall prevention. A 12-week line dance programme was applied to 18 elderly females who aged more than 65 years in the community. Balance ability during walking was evaluated by the range of center of pressure(cop), the velocity of cop, and free torque that calculated on the basis of ground reaction force data. The range and velocity of cop in the anterio-posterior were significantly reduced after performing(p<.01, p<.05, respectively), but change in those of cop in the medio-lateral and free torque were not found. It was demonstrates that 12-week line dance programme allows more effective in anterio-posterior stability of walking. It was suggested that the effect of fall prevention exercise should be studied more associate with fall frequency as future study.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.107-114
• /
• 2016

The efficiency of the purchasing and procurement logistics is important in automotive industry. The rationalization of production system is directly impact on productivity and quality. For this reason importance of logistics is high. Despite we are continuously making effort, our country are still below the level than developed country on logistics efficiency. Rising labor costs is an important factor in increasing logistics costs. So workforce reduction in logistics department is a large part. We deal with A-company inbound logistics, especially procurement logistics in automotive logistics as research object. So in this study we do research on work load balance about workers. We do research on 1,475 kinds of components in procurement process. We applied work load balance algorithm on chassis, final, sequence, trim warehouses workers. According to number of workers and average M/H, algorithm is applied in two ways. After applied work load balance algorithm we reduced numbers of workers from 28 to 20 and improved worker load balance rate from 47.1% to 93.7%.

• Wind and Structures
• /
• v.6 no.4
• /
• pp.307-324
• /
• 2003

The paper presents results of studies concerning wind-induced aeolian vibration and fatigue of a 110 kV covered conductor overhead line. Self-damping measurement techniques are discussed: power method is found to be the most reliable technique. A method for compensating tension variations during the self-damping test is presented. Generally used empirical self-damping power models are enhanced and the different models are compared with each other. The Energy Balance Analysis (EBR) is used to calculate the aeolian vibration amplitudes, which thereafter are converted to bending stress for the calculation of conductor lifetime estimate. The results of EBA are compared with field measurements, Results indicate that adequate lifetime estimates are produced by EBA as well as field measurements. Generally the EBA gives more conservative lifetime expectancy. This is believed to result from the additional damping existing in true suspension structures not taken into account by EBA. Finally, the correctness of the line design is verified using Cigre's safe design tension approach.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.952-959
• /
• 2012

This study looks into the changes in collar patterns in tailored jackets with different numbers of buttons. The study discusses the pattern design method of tailored colors in 4 different styles, such as the effect of the number of buttons of tailored jackets on collar width and length, lapel width and length, and angle of lapel and overall balance in design. Through the first dress experiment, patterns were adjusted and corrected. The second dress experiment was conducted with the modified experimental clothes. The results of comparison and analysis are as follows. The 1 button tailored jacket was most preferred for its beautiful expression and overall balance of upper color and lapel when its lapel width was 7.5 cm. The second most preferred one was the 2 button tailored jacket with lapel width of 8 cm, and the 3 button jacket showed relatively good balance when its lapel width was 7.5 cm. The 4 button tailored jacket showed a bad balance in collar and button. Also, its overall silhouette was disappointing and thus was less preferred than others. For smaller number of buttons, the angle of lapel's break line increased, thus displaying a more refined and slim silhouette. On the other hand, the angle of lapel's break line decreased for greater number of buttons, thus displaying a dull and fat image. As a result, the jacket with many buttons was less preferred.

• PNF and Movement
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2019

Purpose: This study investigates the effects of task-oriented training for a left trunk flexion pattern using real-time ultrasound imaging in a stroke patient with unilateral neglect symptoms. Methods: This study used the ABA experimental design, which is a single-subject research method among individual case research methods. For the ABA experimental design, changes in the degree of unilateral neglect, balance ability, and the thickness of the lateral abdominal muscle were visually analyzed during the baseline process, in the intervention period, and after the intervention. The experiments were performed 24 times in total for 8 times in each of the 3 periods. The unilateral neglect was measured using the Albert test, balance ability was measured using the Berg balance test, and the thickness of the lateral abdominal muscle was measured using ultrasound imaging. The subject was a 50-year-old male patient with unilateral neglect caused by right cerebral hemorrhage. He performed task-oriented training for a voluntary left trunk flexion pattern using real-time ultrasound imaging during the intervention period. Results: The result of comparing the data collected during the intervention period with the data point average of the baseline process showed that balance ability improved and the tendency line was above the baseline. The tendency line of unilateral neglect was below the baseline and showed a decreasing tendency. The thickness of the lateral abdominal muscle showed an increasing trend and the tendency line was above the baseline. Conclusion: The results of this study suggest that the task-oriented training for left trunk flexion pattern using real-time ultrasound imaging has a beneficial effect on balance ability, the degree of unilateral neglect, and the strength of the lateral abdominal muscle in unilateral neglect patients.