• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.295-298
• /
• 2001

This paper presents mechanical properties and weatherability of FRP pole used for a distribution line about high strength and good insulation properties. The experiment strength obtained in cantilever beam test are comparable to ES standards. The environmental factors, such as elevated temperatures, high humidity, and corrosive fluids, and ultraviolet(UV) rays, influence on the performance of Polymeric matrix composite.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.892-898
• /
• 2013

A field emission projection microscope was constructed to investigate the atomic and chemical-bonding structure of molecules using electron in-line holography. Fringes of carbon nanotube images were found to be interferograms equivalent to those created by the electron biprism in conventional electron microscopy. By exploiting carbon nanotubes as the filament of the electron biprism, we measured the transverse coherence length of the electron beam from tungsten field emitters. The measurements revealed that a partially coherent electron-beam was emitted from a finite area.

• 복식문화연구
• /
• 제19권2호
• /
• pp.346-359
• /
• 2011

The purpose of this study was to examine students' reasons and standards for purchasing their casual upper garments through online shoppin. A questionnaire composed of 26 items in five-point Likert type (14 items for measuring reasons, and 12 items for measuring standards for their purchase) was administered. The subjects were 422 male and female students attending middle schools, high schools and colleges located in the metropolitan region of Daegu. For a statistical analysis, a $3{\times}2$ two way ANOVA design (3 levels of schools: middle school, high school and college and 2 sexes: male and female) was involved, and Turkey's HFD multiple comparisons were made. The results showed that the reasons for students' purchasing casual upper garments through online shopping malls were as follows: quality, availability of discount coupons and points, other benefits such as special promotions, gifts, the easy return of goods and refunds, and also no trial of wearing shirts even at off-line stores. Significant differences in purchasing reasons through online shopping were found among middle schoo, high school and college students. There were also significant differences between male and female students mostly found in three variations of purchasing reasons: ease of availability of garments in contemporary fashion, convenient shopping without any restriction on time, and the decision to purchase with help from consumers' recommendations. Significant differences among middle school, high school and college students were found in the following standards for the students' decision to purchase their casual upper garments through online shopping: affordability, color, design, style, payment safety, and ease of maintenance (cleaning and ironing). Differences between male and female students were found to be significant in the following categories: affordability, fashionable, brand name, free delivery, product quality, coordination with other clothes, and consumers' recommendations on the products concerned.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.99-102
• /
• 2009

We report our development of the fabrication process of sub-micron scale $Al-AlO_x-Al$ tunnel junction by using electron-beam lithography and double-angle shadow evaporation technique. We used double-layer resist to construct a suspended bridge structure, and double-angle electron-beam evaporation to form a sub-micron scale overlapped junction. We adopted an e-beam insensitive resist as a bottom sacrificing layer. Tunnel barrier was formed by oxidation of the bottom aluminum layer between the bottom and top electrode deposition, which was done in a separate load-lock chamber. The junction resistance is designed and controlled to be 50 $\Omega$ to match the impedance of the transmission line. The junctions will be used in the broadband shot noise thermometry experiment, which will serve as a link between the electrical unit and the thermodynamic unit.

• 비파괴검사학회지
• /
• 제28권2호
• /
• pp.125-130
• /
• 2008

레이저 용접부의 국소 잔류응력을 측정하기 위한 비파괴 기법으로 구형압입시험이 제안되었다. 용접상태 절단휠의 구형압입시험으로 얻어진 겉보기 항복강도와 절단횔 용접부에 대한 응력완화 열처리 이후 동등한 위치에서 구한 고유 항복강도를 정량적으로 비교하였다. 고유항복강도가 탄성한도 내의 잔류응력에 의해서 변화하지 않는다고 고려하면 용융선으로부터 거리에 따른 두 항복강도의 차이가 용접잔류응력의 분포로 나타난다. 레이저 용접된 다이아몬드 절단휠의 구형압입시험으로부터 약 10 mm 폭에 걸친 잔류응력의 분포를 확인하였으며, 잔류응력은 쌩크와 절단팁 내에서 각각 최대 압축 및 인장 잔류응력치를 나타내었다.

• International Journal of Vascular Biomedical Engineering
• /
• 제4권2호
• /
• pp.25-30
• /
• 2006

We intended to measure the IT, MT, and the IMT of carotid artery separately and tried to analyze the clinical significance. Two hundred and fifty consecutive patients (125 males, 125 females) underwent carotid artery scanning using high-resolution ultrasound. The images were off-line analyzed using B-mode ultrasound image processing, devised in our research. We measured the IT, MT, and IMT semi-automatically at the far wall of designated 1cm length of the right common carotid and calculated the average values over the 200 points. The IT (p < 0.05), MT (p < 0.05) as well as IMT (p < 0.01) of patients with atherosclerotic disease were significantly thicker than that of the patients without atherosclerotic disease. Patients with hypertension showed significantly thicker IT (p < 0.05), MT (p < 0.01), and IMT (p < 0.01) than that of the patients without hypertension. However, only IT was thicker in patients with smoking (p < 0.05) than that of the patients without smoking. Smoking was associated only with intima while hypertension was associated with the all three layer's thickness. This result suggests the atherosclerotic process can be different by cardiovascular risk factors.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권2호
• /
• pp.18-22
• /
• 2008

The pitch and orthogonality of two-dimensional (2-D) gratings were measured using a metrological atomic force microscope (MAFM), and the measurement uncertainty was analyzed. Gratings are typical standard devices for the calibration of precision microscopes, Since the magnification and orthogonality in two perpendicular axes of microscopes can be calibrated simultaneously using 2-D gratings, it is important to certify the pitch and orthogonality of such gratings accurately for nanometrology. In the measurement of 2-D gratings, the MAFM can be used effectively for its nanometric resolution and uncertainty, but a new measurement scheme is required to overcome limitations such as thermal drift and slow scan speed. Two types of 2-D gratings with nominal pitches of 300 and 1000 nm were measured using line scans to determine the pitch measurement in each direction. The expanded uncertainties (k = 2) of the measured pitch values were less than 0.2 and 0.4 nm for each specimen, and the measured orthogonality values were less than $0.09^{\circ}$ and $0.05^{\circ}$, respectively. The experimental results measured using the MAFM and optical diffractometer agreed closely within the expanded uncertainty of the MAFM. We also propose an additional scheme for measuring 2-D gratings to increase the accuracy of calculated peak positions, which will be the subject of future study.

• 비파괴검사학회지
• /
• 제30권1호
• /
• pp.1-5
• /
• 2010

음향방출법은 압력용기 구조에서 존재하는 결함이나 누출을 탐지하거나 모니터링하는데 유용한 도구로 부상하였다. 본 연구에서는 브레그 격자에 근거한 음향방출센서 시스템이 개발되었다. 다양한 길이의 센싱부를 포함하는 다양한 형태의 광섬유 브레그 격자센서가 제작되었고 PZT 펄서와 연필심 파괴를 이용하여 시험되었다. 두 가지 형태의 센서부착법이 사용되었다. 첫째는 광섬유 브레그 격자센서가 접착제를 이용하여 표면에 완전히 부착되는 방법이고 둘째는 센서의 한쪽 부분만 표면에 부분적으로 고정하고 다른 쪽은 외팔보와 같이 작동하도록 하는 방법이다. 이렇게 함으로써 센싱부의 길이에 비례하는 고유진동수를 갖는 광섬유 브레그 격자센서를 구성할 수 있다. 본 연구에 사용된 센서 시스템의 최종 목적은 원자력발전소 상부 관통관의 균열이나 누출을 탐지하는 온라인 모니터링 시스템에 사용하는 것이다.

• 한국재난정보학회 논문집
• /
• 제20권1호
• /
• pp.1-12
• /
• 2024

연구목적:본 연구는 최근 들어 적용이 확대되고 있는 Shield 및 TBM터널의 유지관리계측 관리 기준을 설정하여 터널 유지관리계측 관리기술을 향상시키고자 한다. 연구방법: 국내 Shield 및 TBM터널인 서울지하철 7호선, 9호선, 분당선, 국외의 프랑스, 일본, 영국의 채널터널 자료와 국내외의 터널 모형실험 사례를 종합적으로 분석하여 상호 비교를 실시한다. 연구결과: Shield 및 TBM 터널의 유지관리계측 단면 중 단면설계나 단면해석 등의 수치해석 결과에 의한 설계 예상치가 없는 경우의 유지관리계측 관리기준을 설정한다. 결론: 계측 관리기준 적용 시 각각의 계측항목 뿐만 아니라 전체 항목의 변화추이와 상관관계, 그리고 터널의 변상 등을 종합적으로 고려하여 안전성 여부를 판정하여야 한다.

• 전기전자학회논문지
• /
• 제16권1호
• /
• pp.1-6
• /
• 2012

적절한 송전용량으로 전력공급을 안정하게 유지하기 위하여 노후 가공송전선의 열용량이나 수명 평가가 더욱 중요한 관심사가 되었다. 부하정격과 이도/이격거리 모두는 송전용량을 결정하는 중요한 요소들이다. 국내의 2회선 송전선로에 대한 열용량 및 도체수명을 평가하기 위하여, 전기설비기술기준은 물론 이도 및 지상고에 대한 설계기준들이 검토된다. 상정사고를 가정하여 도체온도와 이도를 계산하고 부하용량을 증대시키기 위한 방안이 모색되었다. 본 논문에서는 노후 도체에 대한 열용량과 한계이도를 적절히 평가함으로써, 기존 전력계통의 신뢰성을 보장하기 위한 개선 방안이 제시되었다.