• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.201-203
• /
• 2006

This paper describes a new LOS(Line-of-Sight) estimator for BTT missiles. The dynamic models of LOS rate and a seeker are derived. Based on these dynamic models, we design a nonlinear estimator, which takes into account roll motion of BTT missiles and sensor noises. Simulation results show that the LOS rate estimates of the proposed estimator are more accurate than those of the conventional estimator.

• 대한산업공학회지
• /
• 제29권3호
• /
• pp.197-205
• /
• 2003

Many people get plenty of information from World Wide Web, and the study of the factors that affect on reading task on web browser is presenting important issue. But domestic studies on legibility of Korean on web environment were relatively poor and the study about suitable text layout for skimming wasn't carried out also. At this point, this study was performed to investigate the effects of two types of reading, three levels of line length, and three levels of interlinear spacing on comprehension and reading rate when subjects read the materials on web browser. Reading speed, error rate, subjective preference and SACL(Stress and Arousal Checklist) evaluation were measured to evaluate the effects. Eighteen volunteer subjects participated in eighteen web document sessions with two different reading types, three different line lengths, and three different interlinear spacings. Statistical results from objective and subjective evaluations indicate that 50 characters per line of line length and 100 percents of interlinear spacing improved reading rate, overall error rates were reduced when reading normally, and SACL measures were increased at fast reading type. Consequently, in order to design text layout to retrieve information in WWW environment effectively, just applying guidelines of traditional printed material is not proper. Therefore, it is effective to consider reading type, line length, and interlinear spacing. Implications of these results and suggestions for the further study are also addressed.

• 한국가정과학회지
• /
• 제7권3호
• /
• pp.35-48
• /
• 2004

In this study, by determining lower limb movements which cause significant changes in body surface lines, body parts with the greatest maximum expansion and contraction rate respectively were illustrated in descending order. Using unmarried female university students aged 18 - 24 as subjects, a total of 32 body surface categories (15 body surface lines and 17 body surface segment lines) were measured in one static and 9 movement poses. In particular, expansion and contraction levels and rates were measured and used in the analysis. The analysis first involved the calculation of the average measurement per body part in body surface line in static pose as well as of the average expansion and contraction levels and rates in 9 lower limb movements. Two-way MANOVA and multiple comparison analysis (Tukey) were conducted on movements and individual somatotypes regarding measurement per body part and expansion and contraction rates. Movements which cause measurements of body surface lines differed significantly in body surface line in static pose versus in movement were then identified. Among average expansion and contraction rates in such movements, maximum average expansion and contraction levels, maximum average expansion and contraction rate, and classes of expansion and contraction rate were determined per body part. The results of this study are as follows. First, 5 lower limb movements; F2, F5, F6, F7, F8, which caused significant changes in body surface lines were determined and illustrated in table 4. Second, the levels, rates, and classes of expansion and contraction rate per body part are illustrated in Tables 5 and 6. Body parts with the greatest maximum expansion rate were, in descending order: upper segment of center back leg line, upper segment of inner leg line, middle segment of center front leg line, posterior crotch length, anterior knee girth, anterior thigh girth, center back leg line, girth at crotch height, anterior midway thigh girth, hip girth, anterior crotch length, knee girth, waist girth, inner leg line, thigh girth, and crotch length. Those with the greatest maximum contraction rate were, in descending order: anterior crotch length, upper segment of center front leg line, lower segment of center back leg line, center front leg line, and posterior thigh girth. The maximum expansion rates and maximum contraction rates, which ranged from 2.05 to $35.95\%$ and from -0.20 to $-30.16\%$ respectively, were classified per body part into 4 ABCD classes. The body part with maximum expansion was the upper segment of the center back leg line at vertical body surface line, expanding by $35.95\%$ or 16.03cm in F5 flexion movement. In contrast, the body part with maximum contraction was the anterior crotch length at vertical body surface line, contracting by $-30.16\%$ or -10.54cm in F5 flexion movement. Both, however, were the body parts to expand or contract the most among all horizontal and vertical body surface lines.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.38-44
• /
• 2005

Many mid-sized companies in Korean automotive industry have attempted to solve the lack of human power, to control the quality of components, to improve the production rate, and to innovate the manufacturing line. The goals of this study are to analyze the production rate of an automotive component manufacturing line using simulation software, to construct a Flexible Automation Subassembly (FAS) system and to suggest an optimized layout design using FAS line. In this research, the simulation model for manufacturing line was developed and used the realistic data of a medium sized company in Korean automotive industry. To complete this research, a simulation software 'ARENA' was used. This research analyzed the work distribution strategy and cycle time element for production flow and proposed an optimized layout to resolve line balancing problem which would bring the improved production rate.

• 한국의상디자인학회지
• /
• 제8권1호
• /
• pp.69-79
• /
• 2006

The purpose of this study is to find the proper width of fabric which can bring high efficiency on productivity. We focus on the marking method by comparing and analyzing the marking efficiency of A-line skirt. This study employs 4 criteria to mark the A-line skirt, which are cutting method, angle, width, and direction, respectively. There can be 2 different cutting methods(fold pattern and add seam pattern at the front and back center line), and 2 different angles(warp angle and bias angle). Also, width of the fabric can be classified into 2 groups(110cm, 150cm), and marking direction can be grouped into 2(one direction marker and one direction per each size marker). These 4 criteria make 16($2^*2^*2^*2$) cases for this study. Main findings are follows. First, the skirt with folded at the center line had higher efficiency rate than the skirt with add seam at the center line. Second, the skirt with the 150cm width has higher efficiency rate than that of 110cm. Third, fixing the warp angle has higher efficiency rate than that of fixing the bias angle at the front and back center line. Finally, one direction per each size marker has much higher efficiency than the one direction marker.

• 항공우주기술
• /
• 제6권2호
• /
• pp.73-78
• /
• 2007

현재 개발되고 있는 위성용 전자광학시스템의 설계 파라미터를 적용하여 알려진 식에 의해 위성의 운용고도와 자세변화에 따른 전자광학시스템의 GSD 및 라인레이트 변화관계를 살펴보았다. 그리고 고도변화에 따른 적용 가능한 라인레이트와 위성의 지상 스캔율의 차이에 의해 발생할 수 있는 성능변화 요소로서의 MTF에 대한 영향을 검토하였다. 즉 현재 개발이 진행되고 있는 카메라 전자부의 설계 파라미터를 적용하여 조정 가능한 라인레이트의 한계를 알아보고 이에 의한 성능감소 변화를 검토함으로써 현재 개발 진행되는 전자광학시스템의 카메라전자부의 설계요소에 대한 분석을 수행하였다.

• 한국통신학회논문지
• /
• 제23권6호
• /
• pp.1562-1574
• /
• 1998

본 논문에서는 ATM(Asynchronous Transfer Mode) 교환기 시스템에 T1, E1 및 부분적으로 E1급 속도의 중 저속 HDSL(High-rate digital subscriber line) 정합 기능을 개발하고, 근단누화(NEXT), 임펄스. 선로 잡음(power line noise) 및 접지 임피던스(longitudinal) 잡음 같은 주요 전송 손실이 존재하는 0.4 mm 및 0.5 mm의 기존 전화가입자 선로(UTP, Unshielded twisted pair)를 사용하는 CSA(Carrier serving areas) 선로 모델을 이용하여 $10^{-7}$의 BER(Bit error rates)의 전송 성능을 만족하기 위한 가입자 서비스 전송 거리 성능을 평가하였다. HDSL은 DSI, ISDN 기본 속도 접속 및 DLC 피더에 사용될 것이며 광 케이블과 인터페이스될 것이다. 또한, HDSL 시잔 전망을 제시한다.

• Journal of Welding and Joining
• /
• 제19권4호
• /
• pp.429-436
• /
• 2001

The effect of welding condition on the microstructures of the weld metal in A7N01 welded by $CO_2$ laser was investigated. The number of ripples was increased with decreasing power and increasing welding speed. In the bead without ripple lines, the subgrain microstructures distribution from the fusion line toward the center of the bead were in the order of cellular, dendritic and equiaxed dendrite. However, in the bead with ripple lines, cellular and dendritic were formed between the fusion boundary and the ripple line. Inaddition, those structures were also observed between the ripple line. Equiaxed dendrites were formed only at the center line region. Cellular and dendritics formed near the ripple line were larger than those formed near the fusion boundary. The cooling rates estimated by the dendrite arm spacing were in the range of 200 to 1150oC/s. Cooling rate was increased with decreasing the power and increasing the welding speed. Mg and Zn segregated at the boundaries of cellulars and dendritics, Mg was segregated more than Zn. The segregation of Mg and Zn decreased with increasing cooling rate. Hardness of the weld metal was lower than that of the base metal in all welding conditions and increased as the cooling rate increased.

• 전기전자학회논문지
• /
• 제20권1호
• /
• pp.82-88
• /
• 2016

영상 인식에서 널리 이용되는 PPHT(Progressive Probability Hough Transform)는 직선을 정확하게 인식하는 우수한 알고리즘이나 원본 영상이 선명하지 않거나 복잡하여 잡음 성분이 많은 경우 인식률이 감소하는 문제가 있다. 이러한 문제를 해결하기 위해 잡음에 강하고 손상된 가장자리 패턴을 복구하며 직선을 인식하는 개선된 PPHT 방식을 제안한다. 제안하는 알고리즘은 픽셀 단위로 직선을 추적하고 검증하여 선분을 검출하는 방식으로 잡음의 영향을 최소화하고 손상된 가장자리 패턴을 일정 범위 내에서 복구하여 인식률을 증가시켰다. 제안한 알고리즘을 차선 인식에 적용하여 직선의 오인식률을 30% 이상 감소시키고 선분 인식률이 15%까지 증가함을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제27권2호
• /
• pp.211-219
• /
• 2016

To develop an ash separator for the solid fuel chemical looping combustion system, effects of operating variables such as solid injection nozzle velocity, diameter of solid injection nozzle, gap between solid injection line and vent line, vent line inside diameter, and solid intake height on solid separation rate and solid separation efficiency were measured and discussed using heavy and coarse particle and light and fine particles mixture as bed material in an acrylic fluidized bed apparatus. The solid separation rate increased as the solid injection nozzle velocity and the diameter of solid injection nozzle increased. However, the solid separation rate decreased as the gap between solid injection line and vent line, the vent line inside diameter, and the solid intake height increased. The solid separation efficiency was in inverse proportion to the solid separation rate. In this study, we could get high solid separation rate up to 2.39 kg/hr with 91.6% of solid separation efficiency.