• Ocean and Polar Research
• /
• v.40 no.4
• /
• pp.237-247
• /
• 2018

This study aims to estimate optimal harvests, fishing efforts, and stock levels of hairtail harvested by the large pair bottom trawl, the large otter trawl, the large purse seine, the offshore long line, and the offshore angling fisheries by using the surplus production models and the current value Hamiltonian method. Processes of this study are as follows. First of all, this study estimates the standardized fishing efforts regarding the harvesting of the hairtail by the above five fishing gears based on the general linear model developed by Gavaris. Secondly, this study estimates environmental carrying capacity (k), intrinsic growth rate (r), and catchability coefficient (q) by applying the Clarke Yoshimoto Pooley (CY&P) model among various surplus production models. Thirdly, this study estimates the optimal harvests, fishing efforts, and stock levels regarding the hairtail by the current value Hamiltonian method, including the average landing price, the average unit cost, and the social discount rate. Finally, this study attempts a sensitivity analysis to figure out changes in optimal harvests, fishing efforts, and stock levels due to changes in the average landing price and the average unit cost. As results induced by the current value Hamiltonian method, the optimal harvests, fishing efforts, and stock levels regarding the hairtail caught by several fishing gears were estimated as 33,133 tons, 901,080 horse power, and 79,877 tons, respectively. In addition, from the results of the sensitivity analysis, first of all, if the average landing price of the hairtail constantly increases, the optimal harvests of it increase at a decreasing rate, and then harvests finally slightly decrease as a result of decreases in stock levels. Secondly, if the average unit cost of fishing efforts continuously increases, the optimal fishing efforts decreases, but optimal stock levels increase. Optimal harvests start climbing and then decrease continuously due to increases in the average unit cost. In summary, this study suggests that the optimal harvests (33,133 tons) were larger than actual harvests (25,133 tons), but the optimal fishing efforts (901,080 horse power) were much less than estimated standardized fishing efforts (1,277,284 horse power), corresponding to the average of the recent three years (2014-2016). This result implies that the hairtail has been inefficiently harvested and recently overfished due to excessive fishing efforts. Efficient management and conservation policies on stock levels need to be urgently implemented. Some appropriate strategies would be to include the hairtail in the Korean TAC species or to extend the closed fishing season for this species.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.174-179
• /
• 2013

This paper presents a capacitor loaded tunable bandpass chip filter using multiple split ring resonators (MSRRs) with two transmission zeros. To obtain high selectivity and minimize the chip size, asymmetric feed lines are adopted to make a pair of transmission zeros located on each side of passband. Compared with conventional filters using cross-coupling or source-load coupling techniques, the proposed filter uses only two resonators to achieve high selectivity through a pair of transmission zeros. In order to optimize selectivity and sensitivity (insertion loss) of the filter, the effect of the position of asymmetric feed line on transmission zeros and insertion loss is analyzed. The SOI-CMOS switched capacitor composed of metal-insulator-metal (MIM) capacitor and stacked-FETs is loaded at outer rings of MSRRs to tune passband frequency and handle high power signal up to +30 dBm. By turning on or off the gate of the transistors, the passband frequency can be shifted from 4GH to 5GHz. The proposed on-chip filter is implemented in 0.18-${\mu}m$ SOI CMOS technology that makes it possible to integrate high-Q passive devices and stacked-FETs. The designed filter shows miniaturized size of only $4mm{\times}2mm$ (i.e., $0.177{\lambda}g{\times}0.088{\lambda}g$), where ${\lambda}g$ denotes the guided wave length of the $50{\Omega}$ microstrip line at center frequency. The measured insertion loss (S21)is about 5.1dB and 6.9dB at 5.4GHz and 4.5GHz, respectively. The designed filter shows out-of-band rejection greater than 20dB at 500MHz offset from center frequency.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.64-67
• /
• 1999

We have been implemented 10 Gb/s-320 km of dispersion-shifted fiber (DSF) transmission. The optical link consists of a 10 Gb/s optical transceiver, an optical booster amplifier, 3 sets of optical in-line amplifiers, an optical preamplifier and transmission fibers. Firstly, we investigated the Q-factor characteristics in terms of optical signal to noise ratio (OSNR) of 320 km of DSF, measured receiver sensitivity is -27 dBm and power penalty is 2 dB, respectively. We concluded that optical SNR degradation and path penalty gives rise to 1 dB penalty, respectively.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.304-310
• /
• 2011

The application of time-domain methods in emission measurement instruments allows for a reduction in scan time by several orders of magnitude and for new evaluation methods to be realized such as the real-time spectrogram to characterize transient emissions. In this paper two novel systems for time-domain EMI measurements above 1 GHz are presented. The first system combines ultra-fast analog-to-digital-conversion and real-time digital signal processing on a field-programmable-gate-array (FPGA) with ultra-broadband multi-stage down-conversion to enable measurements in the range from 10 Hz to 26 GHz with high sensitivity and full-compliance with the requirements of CISPR 16-1-1. The required IF bandwidths were added to allow for measurements according to MIL-461F and DO-160F. The second system realizes a system of time-interleaved analog-to-digital converters (ADCs) and has an upper bandwidth limit of 4 GHz. With the implementation of an automatic mismatch calibration, the system fulfills CISPR 16-1-1 dynamic range requirements. Measurements of the radiated emissions of electronic consumer devices and household appliances like the non-stationary emissions of a microwave oven are presented. A measurement of a personal computer's conducted emissions on a power supply line according to DO-160F is given.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1957-1959
• /
• 2000

The PD measurement method is very useful to detect insulation degradation. Recently, the HFPD(High Frequency Partial Discharge) measurement testing is widely used in partial discharge measurement of HV machines because HFPD measurement testing receives less influence of external noise and has a merit of good sensitivity. Therefore it is very useful method compare to previous conventional PD testing method and effective diagnosis method in power transformer that requires in-service diagnosis. But partial discharges have very complex characteristics of discharge pattern so it is required continuous research to development of precise analysis method. In this study, simulated transformer is manufactured and HFPD occurred from simulated transformer is measured with broad band antenna and active-line RF measurement system in real time, the degradation grade of transformer is analyzed through produced patterns in simulated transformer according to applied voltages. Also the PD pattern which was measured with EMC analyzer and RF measurement system is compared.

• Management & Information Systems Review
• /
• v.4
• /
• pp.309-325
• /
• 2000

Organizations rely on Secure ID resources today to handle vast amounts of information. Because the data can vary widely in type and in degree of sensitivity, employees need to be able to exercise flexibility in handling and protecting it. It would not be practical or cost-effective to require that all data be handled in the same manner or be subject to the same protection requirements. Without some degree of standardization, however inconsistencies can develop at introduce risks. Policy formulation is an important step toward standardization of security activities for ID resources. ID security policy is generally formulated from the input of many members of an organization, including security officials, line managers, and ID resource specialists. However, policy is ultimately approved and issued by the organization's senior management. In environments where employees feel inundated with policies, directives, guidelines and procedures, an ID security policy should be introduced in a manner that ensures that management's unqualified support is clear. The organization's policy is management's vehicle for emphasizing the commitment to ID security and making clear the expectations for employee involvement and accountability. This paper will discuss ID security Policy in terms of the different types (program-level and issue-specific), components, and Implementation of Expert System Simulation based on 4GL, PowerBuilder.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.5
• /
• pp.202-213
• /
• 2006

This paper presents a new approach for optimal dispatch of energy and frequency regulation reserve considering contingency in a competitive electricity market. It is necessary to introduce the reserve market with the spot energy market for operating efficiently and obtaining the security of the electricity market. However, the reserve market is closely connected with the energy market since the energy and reserve are produced from the same resources. Thus, it is inevitable to co-optimize the energy and ancillary service for efficient operation of energy and ancillary service market. Therefore, this paper proposes a new method for optimal dispatch of energy and frequency regulation reserve considering n-1 contingency of generator and transmission line using constraints and sensitivity based on AC power flow To verify the effectiveness of the proposed method, the numerical studies have been performed for 5-bus sample system and modified IEEE 14-bus system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.39-43
• /
• 2012

60GHz band RF transceiver was made with the NRD waveguide structure for the point- to-point communication. A dielectric line that of comprising NRD waveguide was the milling process was not easy because a material gets soft, and also compression and expansion according to a temperature were serious, so this line was not suitable for the device in which the resonance characteristic was important. In addition, the thing for comprising amplification module was difficult in the NRD waveguide structure. In this paper, a way in which to overcome mentioned in upper part, the transceiver was made by below technology. Components in which the resonance characteristic was not important were made with the NRD waveguide hybrid IC, and components in which the resonance characteristic was important were made with waveguide. An amplifier packaged and modularizing the bare chip, it equipped at the NRD waveguide within. Manufactured transceiver communicated with FDD method, and it had 10dBm output power, and -60dBm minimum receive sensitivity.

• Korean Journal of Optics and Photonics
• /
• v.3 no.2
• /
• pp.77-85
• /
• 1992

The design of a flat-field XUV spectrograph is optimized for a high throughput, aberration-corrected spectral image in the wavelength region of 50-300 $\AA$ The varied-line spacing (VLS) concave grating theory for an XUV spectrograph with a toroidal mirror in front of an entrance slit is derived. Since the derived theory includes the arbitrary shaped source, it is able to correct the limit of the simple optimization theory which considers only a point source at the center of the entrance slit. The reflection matrix at the toroidal mirror and the diffraction matrix at VLS grating are derived and compared with those of a holographic grating. The absolute energy efficiency of a flat-field spectrograph is calculated by considering the reflectivities of the toroidal mirror and the Au coated concave grating and the grating efficiency. The alignment sensitivity of the toroidal mirror and the concave grating is investigated, and the method to achieve the best imaging of XUV spectrum is discussed. The calculated resolving power of the flat-field XUV spectrograph is more than 4000 in the aberration-corrected wavelength range. The focused spot size at the dispersion plane is less than $20\mu \textrm m\times \mu \textrm m$at the wavelength 100$\AA$ It is shown that a high throughput characteristic can also be achieved through a careful adjustment of alignment parameters.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.5
• /
• pp.375-387
• /
• 2023

The subsea power cables are increasingly important for harvesting renewable energies as we develop offshore wind farms located at a long distance from shore. Particularly, the continuous flexural motion of inter-array dynamic power cable of floating offshore wind turbine causes tremendous fatigue damages on the cable. As the subsea power cable consists of the helical structures with various components unlike a mooring line and a steel pipe riser, the fatigue analysis of the cables should be performed using special procedures that consider stick/slip phenomenon. This phenomenon occurs between inner helically wound components when they are tensioned or compressed by environmental loads and the floater motions. In particular, Vortex-induced vibration (VIV) can be generated by currents and have significant impacts on the fatigue life of the cable. In this study, the procedure for VIV fatigue analysis of the dynamic power cable has been established. Additionally, the respective roles of programs employed and required inputs and outputs are explained in detail. Demonstrations of case studies are provided under severely sheared currents to investigate the influences on amplitude variations of dynamic power cables caused by the excitation of high mode numbers. Finally, sensitivity studies have been performed to compare dynamic cable design parameters, specifically, structural damping ratio, higher order harmonics, and lift coefficients tables. In the future, one of the fundamental assumptions to assess the VIV response will be examined in detail, namely a narrow-banded Gaussian process derived from the VIV amplitudes. Although this approach is consistent with current industry standards, the level of consistency and the potential errors between the Gaussian process and the fatigue damage generated from deterministic time-domain results are to be confirmed to verify VIV fatigue analysis procedure for slender marine structures.