• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.24-30
• /
• 1999

In the automobile development, press tool design and manufacturing are very difficult and need high cost experienced workers. Therefore, we concerned ourselves in the cost down and easy manufacturing. In this research, we have developed a tool for LH/RH of the front fender, which had difficulty in forming. We have carried out the drawing analysis by Pam-stamp and CATIA modeling. Finally, we get the optimal design parameter. As a result of try out, we found out the optimal width and margin at the center line for tool design. Also, in order to get good results we have to intaglio margin in the part of the wheel house and utilize double bead on every side except corner.

• 소성∙가공
• /
• 제16권6호
• /
• pp.463-466
• /
• 2007

Micro-wire made from straightening process invents high added value and it has been adopted many industrial fields. Therefore, many research activities about straightening process are advanced actively. It is known that fine straightness of micro-wire can be obtained by removing residual stress induced during the manufacturing processes. Generally, residual stress is removed or minimized through several drawing processes with heat treatment. In this study, the residual stress at each straightening process is calculated and monitored by finite element analyses and the main reason of stress change is investigated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.48-53
• /
• 2004

Injection molded plastic parts have many surface defcts: Warpage, wedline, flowmark, zetting, scratching, shading and so on. In the desktop mnitor's case, Weld line have been one of the main surface defects. Nowadays in the pursuit of light weight of parts, one of the big problems of LCD Monitor thinks Warpage and surface shrinkage. In this paper, we introduce some instances for prevevting these defestcs in the side of mould drawing, parts drawing and processing condition. Based on these, we tried to find out the optimum processing conditions through repeatedly tried injection moulding after reflecting these instances.

• 한국멀티미디어학회논문지
• /
• 제18권1호
• /
• pp.71-80
• /
• 2015

Many researches have been studied to overcome the weak points in authentication schemes of mobile devices such as pattern-authentication that is vulnerable for smudge-attack. Since random-pattern-lock authenticates users by drawing figure of predefined-shape, it can be a method for robust security. However, the authentication performance of random-pattern-lock is influenced by input noise and individual characteristics sign pattern. We introduce an optimization method of user input direction to increase the authentication accuracy of random-pattern-lock. The method uses the likelihood of each direction given an data which is angles of line drawing by user. We adjusted recognition range for each direction and achieved the authentication rate of 95.60%.

• International Journal of CAD/CAM
• /
• 제5권1호
• /
• pp.51-58
• /
• 2005

Interpreting a natural line drawing as a solid object requires simplifying assumptions in order to make the problem more tractable. Unfortunately, some of the assumptions made in the past have overly simplified the problem. Restricting the valency of vertices, and in particular allowing only trihedral vertices, distorts the problem, since algorithms which are satisfactory for the simplified problem are not satisfactory in the general case. This paper presents a test set of drawings of objects with higher-valency vertices. The intention in creating this test set is that it may be used to determine how effective various algorithms are in dealing with general (i.e. unrestricted) valency vertices.

• 한국정밀공학회지
• /
• 제9권2호
• /
• pp.44-51
• /
• 1992

This paper is concerned with the propram of the automatic mesh generation for 2-dimensional domain which contains the curved boundaries and holes. This program treats a new vertical-line drawing method. This method starts with 4-subdivisions of problem domain and the classification of the cross points of grid lines and boundaries. The new node is generated by the vertical line to the line connecting the two intersections of a boundary and two grid lines in gereral. And the node very close to the boundary is moved to the boundary. The automatic mesh generation composed of only rectangular elements is achieved by this procedure. The boundaries are piecewise-curves composed of lines, circles, arcs, and free curves. The free curves are generated by B-Spline form. Although there were some bad elements for the complex boundary, it was possible to obtain the acceptible rectangular elements for the given boundaries.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.271-276
• /
• 2006

Railroads made many contribution to modernization being developed so quickly as public transportation, but after middle of 20 century, its qualities are getting low because of focusing on the investment and development of cars and airplanes. Its role which is getting the excellent merits on the mass transportation, rapid transit. safety, state period, energy efficiency, and prevention of environmental pollution has been reconsidered. Element of horizontal alignment In an existing railroad line is needed as basic materials, when it will be improved or moved. If its design drawing was lost or damaged, it is impossible to recover. It is riot easy to repair for it as disasters. We must understand an existing railroad line to bring a function included a basic geography situation. In this studies we acquire, analyze. and handle the digital picture of railroads and then reappear shape of three dimension. But also we want to contribute to establish the facilities information choosing materials of existing railroad line in outputting the alignment element by reverse.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.459-462
• /
• 2009

해칭은 물체의 곡률방향을 따라 평행한 선 스트로크를 그려 모양과 음영을 표현하는 효과적인 예술적 기법이다. 본 논문에서는 주어진 스트로크 방향으로 선 스트로크를 그리는 실시간 픽셀단위 영상공간 방법을 제시한다. 본 해칭 방법은 화면 위에서 직접 적용되기 때문에 복잡한 구조를 갖는 3차원 장면을 효율적으로 실시간에 그려낼 수 있다. 우리는 본 방법을 GPU의 픽셀 쉐이더를 이용하여 구현한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.600-603
• /
• 2004

UAV (Unmanned Aerial Vehicle) is an aerial vehicle that can accomplish the mission without pilot. UAV was developed for a military purpose such as a reconnaissance in an early stage. Nowadays usage of UAV expands into a various field of civil industry such as a drawing a map, broadcasting, observation of environment. These UAV, need vision system to offer accurate information to person who manages on ground and to control the UAV itself. Especially LOS(Line-of-Sight) system wants to precisely control direction of system which wants to tracking object using vision sensor like an CCD camera, so it is very important in vision system. In this paper, we propose a method to recognize object from image which is acquired from camera mounted on gimbals and offer information of displacement between center of monitor and center of object.

• 드라이브 ㆍ 컨트롤
• /
• 제9권2호
• /
• pp.28-38
• /
• 2012

Monitoring of system cleanliness levels and counting of particulate contaminant are fundamental to achieving hydraulic system reliability as any departure from the specified cleanliness level is often a precursor to future failures. On-line monitoring of cleanliness levels has the advantage of giving data both very quickly and accurately as environmental influences are eliminated. In this way, corrective actions can be promptly implemented. Most on-line instruments are sensitive to system conditions to a greater or lesser extent, but Automatic Particle Counters (APCs) working on light extinction principles are especially sensitive to the presence of optical interfaces caused by such conditions as fluid mixtures, emulsions, free water and air bubbles. These conditions give erroneous data and can result in drawing incorrect conclusions, wasting maintenance time and ultimately, reduced user confidence in cleanliness monitoring. This paper describes such conditions and shows how the correct selection of the analysis technique can result in reliable cleanliness level data.