• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.36-40
• /
• 2013

A novel design method of ultra wideband bandpass filter using CRLH transmission line with Dumbell type DGS is presented in this paper. Defected Ground Structure and microstrip interdigital capacitor are used to design the ultra wideband (UWB) filter. CRLH transmission line has composite characteristics of low pass and high pass filter. As control of cutoff frequency of low pass and high pass response on CRLH transmission line, we can get characteristic of UWB filter. We designed and simulated for CRLH transmission lines with one, two, four, and eight cells. A UWB filter using four cells CRLH is designed and fabricated to verify the results. The characteristics of designed filter have center frequency of 5GHz and relative bandwidth of 88%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.5
• /
• pp.741-751
• /
• 2009

In order to design and develop the various silhouette of pants pattern for standardized pants patterns, this study is to classify the pants style by the silhouette and to characterize each pants pattern which are classified. Recent 37 ready-made pants patterns of various style were collected in order to analyze their silhouette from April to July 2007. Measurement of each region of the pants pattern were compared and analysed. After analyse the standard deviation, coefficient of variance, minimum, maximum, range about the measurement of each region of the pants pattern, major pattern design factors were extracted. Five major factors are the angle of center front line and center back line, the crotch extension, the position of center back line against center front line, the curvature of center back line, and amount of waist dart. As a result, pants style were grouped as the culottes, formal, basic and tight style after considering the extracted design factors, and analysing correlation, degree of dispersion of the measurement by part. As the silhouette of pants classification from culotte to tight, the fits are closer to the figure, crotch depth increases, crotch extensions are shorter, and angle of the center back increases. The shape of the connected front and back center lines is U-shape for culotte and is closer to V-shape as the silhouette becomes tight.

• Design & Manufacturing
• /
• v.9 no.2
• /
• pp.30-33
• /
• 2015

In injection molding, many kinds of defects have occurred because of a characteristic of plastics injection molding. Weld line is one of the defects is formed when separated melt fronts recombine together during the mold filling stage. That is one of problems in injection molding. Weld lines in the appearance of plastics parts can deteriorate visible quality. And most importantly, the local mechanical strength in the weld line area can be significantly weaker. It could be one of the most problems for structural applications. In this study, the mold available two-shot-molding of same polymers have been designed, and a series of experiment about tensile strength in weld line area has been conducted using Taguchi's design of experiment to optimize injection molding conditions decreasing of weld strength and find out a factors affected weld strength in two-shot- molding.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.122-130
• /
• 2006

The purpose of this study is to develop the appropriate brassiere pattern for women. Total of 6 brands with same design and 75A, 80A size brassieres(total 12 brassieres) were compared and analyzed for pattern, cup size and patterns. SPSS 10.1 statistic process was used for data analysis. The outcom of this study is summarized as follows. Total length of brassiere by grade were performed smaller than the standard difference 5cm. For 1/2 front cover length, There were no significant differences between 75 and 80. The reason for lower line of wing is shorter than upper line of wing is because side support is cut side ways considering lower line of wing is sewn more toward front than upper line of wing. Even it is same A cup size most cup related sizes become larger according to underbust comparing with cup capacity, they range from 146.67cc to 172.83cc for same A cups. Among same A cups with difference underbust there was average of 26.16cc differences. For relations of material, sewing technology and expansion rate, all 6 brands had zigzag type sewing for upper line tape. For every 0.3cm height, there were $17{\sim}21$ stitches. When urethane mixture is similar expansion rate is higher while number of 1 inch zigzag are high. For elasticity, zigzag stitch expand side ways for more expansion.

• Current Optics and Photonics
• /
• v.7 no.3
• /
• pp.273-282
• /
• 2023

This paper presents a new method for redistributing effectively the first orders of each lens element to achromatize and athermalize an optical system, by introducing a novel method for adjusting the slope of an achromatic and athermal line. This line is specified by connecting the housing, equivalent single lens, and aberration-corrected point on a glass map composed of available plastic and glass materials for molding. Thus, if a specific lens is replaced with the material characterized by the chromatic and thermal powers of an aberration-corrected point, we obtain an achromatic and athermal system. First, we identify two materials that yield the minimum and maximum slopes of the line from a housing coordinate, which specifies the slope range of the line spanning the available materials on a glass map. Next, redistributing the optical first orders (optical powers and paraxial ray heights) of lens elements by moving the achromatic and athermal line into the available slope range of materials yields a good achromatic and athermal design. Applying this concept to design a mobile-phone camera lens, we efficiently obtain an achromatic and athermal system with cost-effective material selection, over the specified temperature and waveband ranges.

• The Research Journal of the Costume Culture
• /
• v.25 no.6
• /
• pp.913-927
• /
• 2017

This study is based on the results of the $7^{th}$ Korea Human Size Survey (Size Korea). The standard body shapes of Korean women between 25 and 34 years old were analyzed and used to develop a prototype princess line for wedding dresses. or this purpose I conducted a literature review and a survey of the actual situation of domestic ligaments. In order to select suitable ligaments for the standard body type of 25~34 year-old Korean women, I collected the most representative ligaments from around the world: Stock man from France, Superior from the USA, KIIYA from Japan, and Pig and Nonno from Korea. They were then compared and analyzed. In the form of a formal wedding dress, a prototype princess line was developed by a draping technique in order to finely implement the human body fitting. To develop the prototype of the princess line, I made test garments with muslin. 25 to 34 years old Korean female standard body type Three human subjects close to the average measurement value were selected as subjects. An exterior appearance evaluation questionnaire was created with 28 questions focusing on the main parts of the prototype princess line. The clothes were evaluated three times. In this study, aesthetic and functional elements were considered for the development of princess line prototypes for wedding dresses. In addition, the amount of spare area was given differently. This study is significant in the achievement of a dress line closest that closely matches the human body line of the standard Korean female body type.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.639-645
• /
• 2003

Design optimization of a transonic compressor rotor (NASA rotor 37) using response surface method and three-dimensional Navier-Stokes analysis has been carried out in this work. Baldwin-Lomax turbulence model was used in the flow analysis. Two design variables were selected to optimize the stacking line of the blade, and mass flow was used as a design variable, as well, to obtain new design point at peak efficiency. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, adiabatic efficiency was successfully improved, and new design mass flow that is appropriate to an improved blade was obtained. Also, it is found that the design process provides reliable design of a turbomachinery blade with reasonable computing time.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1310-1320
• /
• 2007

This study investigated the differences in the importance of store characteristics depending on on-line clothing store type and consumer age. The questionnaires were given to female residents in the ages between 20-39 in Seoul and Kyung-gi province during October 2006. The results were summarized as follows: 1. By analyzing the differences in importances of on-line store characteristics factors it was found that buying process service factor and product searching system factor were important in on-line general merchandise store. and buying process service factor and product factor(all the factors, such as store credit, product, screen-displayed design, searching and approaching system, customer management service) were important in on-line specialty store. 2. By analyzing the differences in importances of on-line store characteristics depending on the store type, buying process system such as refund policy, shipping, high-speed payment and rapid searching, screen-displayed design system, approaching and searching system were more important in on-line general merchandise store when comparing to specialty store. It also showed that the consumer considered the reputation of the store and its image more important in on-line general merchandise store. 3. By analyzing the differences in of on-line clothing store importance depending on age, in the case of on-line general merchandise store, it showed that people in their thirties regarded buying process service factor more important than twenties, and when it came to the product and searching system, it was vice versa. Twenties had a tendency to consider the aspect of product important and, relatively, thirties regarded searching and approaching system factor important. in the case of specialty store. It was found that women in their twenties had a tendency to consider product factor more important.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3756-3760
• /
• 2010

In this paper we propose network design for power line communication of electric railway using messenger wire. we carried out feasibility study on the power line communication(PLC) using Contact wire and messenger wire which are required at electric railway. First of all, full-duplex data communication was implemented using coupler which is suspended on messenger wire at non-voltage state. We verified data transfer rate was found to be good, and then proposed a design example of PLC network as the main components for PLC. we will study continuously make an effort to verify on the network design of PLC for further study.

• Communications for Statistical Applications and Methods
• /
• v.16 no.5
• /
• pp.763-779
• /
• 2009

Sample design is studied to estimate the number of records from singing rooms. The definition of survey population, stratification, sample size and allocation of sample are discussed with using the collected real data. The validity of sample design is testified by the log data collected from online singing room which is sampled with suggested design. Estimation of the number of hitting of off-line singing room is proposed and calculated from the log data collected from sampled off-line singing rooms. The difference of online and off-line singing rooms is analyzed and the method of distribution of singing room royalty is suggested.