• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.41-47
• /
• 2018

The buoy-enabled underwater surveillance system is a device that is installed in a particular sea area and operated for a certain period of tine and moved to another sea area after recovery. In this paper, a mooring method which is applied for a buoy-enabled underwater surveillance system was selected to maintain installation and enure stable operation. Also, the structure of the mooring line was designed. Two-point mooring method was selected considering interference with the communication cable of array-assembly. The composite structure of buoy chain, nylon rope, and anchor chain is designed as the basic component of mooring line. For the verification of design, a numerical simulation and wave tank experiment were performed. Their results were confirmed similarity in test condition. Finally, the mooring lines were designed for the environment of the sea trial location. The mooring line produced by the final design confirmed the stability above the significant wave height considered in the design on the sea trial.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.53-56
• /
• 2000

In this paper, the architecture for the residential gateway is designed for the traffic statistics of home environment. The suitability of 10 Mbps power line communication is investigated for the control and the video data distribution through simulation. The design issues are discussed for a residential gateway and the network design that is based on the power line communication is presented. Traffic models are established from the actual traffic traces. They are used for performance evaluation of residential networks.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.100-103
• /
• 2002

The recent machine tools are requested so high-quality processing and productivity increasing. Therefore it is so necessary to develop technology far high-speed and high-precision. This thesis touches on the development of high speed and intellectual line center. At first, the line center is necessary that strong structure, compact structure and light weight design far high-speed processing and transfer. So. It is necessary that examination of new materials and structures for light-weight and control devices for precision processing. So. It is going to make mention of the process of 1st model production for the above-mentioned base on test model production and evaluation.

• IE interfaces
• /
• v.16 no.2
• /
• pp.240-247
• /
• 2003

Generally, the assembly system relied on conveyor lines is efficient for mass production. But it is not efficient when the product types are often varying and their lot sizes are small. Especially, it is much inefficient for the assembly lines for the electronic products whose types are varying very often. This paper suggests the design of U-shaped assembly lines to replace the existing conveyor systems. The assembly line for the mini-cassette production is dealt with as a case study. The proposed procedure was successfully applied for the design of U-shaped lines. The developed method resulted in the improvement of the productivity such as the decrease of the man power and the cycle time, and the increase of the line utility.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.27-29
• /
• 2005

Overhead transmission line design supporting program using high spatial resolution satellite imagery has been developed recently by Korea Power Engineering Company, The developed program, ITSS(Interactive Tower Spotting System) is purposed to improve the application of satellite imagery with the route selection of overhead transmission line. It is composed of spotting the tower position and designing the tower type and height with DEM(Digital Elevation Model) overlaid with satellite Imagery. To review and confirm the function and work efficiency, ITSS was applied to the pilot project of overhead transmission line design.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.3
• /
• pp.5-17
• /
• 1980

A basic procedure to design marine propellers by a curved lifting line theory was shown. By adapting discrete singularity method, it became possible to take into account of skew, rake and the contraction of slip stream in the early stage of preliminary design procedure. It is also shown that lifting line theory based on the discrete singularity method converges to a common solution obtained by induction factor method with a relatively small number of discrete elements. Lifting the blade geometry more accurately on the basis of hydrodynamic principles. A number of numerical results from lifting line calculation are presented for the purpose of comparison with the previous method, and with these results two sample designs are carried out, which are wake-adapted optimum and wake-adapted non-optimum propellers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.56-59
• /
• 1997

The recent machine tools are requested so high-quality processing and productivity increasing. Therefore it is so necessary to develop technology for high-speed and high-precision. This thesis touches on the development of high speed and intellectual line center. At first, the line center is necessary that strong structure, compact structure an light weight design for high-speed processing and transfer. So. It is necessary that examination of new materials and structures for light-weight and control devices for precision processing. So. it si going to make mention of the process of 1st model production for the above-mentioned base on test model production and evaluation.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.7
• /
• pp.11-19
• /
• 1998

A signal line potential variation due to the delta-I noise was physically investigated in CMOS integrated circuits. An equivalent circuit for the noise analysis was presented. The signal line was modeled as segmented RC-lumped circuits with the ground noise. Then the equivalent circuit was mathematically analyzed. Therebvy a new signal line potential variation model due to the switching mosie was developed. Th emodel was verified with 0.35.mu.m CMOS deivce model parameters. The model has an excellent agreement with HSPICE simulation. Thus the proposed model can be dirctly employed in the industry to design the high-performance integrted circuit design as well as integrated circuit package design.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.251-255
• /
• 2003

In this paper, a miniaturized directional coupler utilizing lumped element is proposed as a interdigital capacitor. The traditional miniaturization technique of transmission line realized a utilizing MIM(Metal-Insulator-Metal) capacitor on CPW(Coplanar Waveguide). However, we present a simplified design procedure without additional manufacturing process utilizing interdigital capacitor on microstrip with ease of design. The similar characteristics between the conventional directional coupler with ${\lambda}/4$ transmission line and the miniaturized directional coupler with ${\lambda}/8$ transmission line are validated through simulation and measurement results. Miniaturization rate of total size is about 25% while coupled line is about 60%. As a result, this proposed directional coupler can reduce the size of mobile communication system at 2 GHz.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.5
• /
• pp.114-120
• /
• 1997

A design method is newly presented for the creation of planar type filters which shapes will be nonuniform transmission line with continuously varying characteristic impedances. Those filters yield frequency characteristics of the bandstop filter in transmission, and have not nay discontinuities. The design is achieved by the control of wave propagation in view to both reflection an transmission properties on the dispersive nonuniform line within the desired frequency band. The developed algorithm is based on optimized perturbations of inherent nulls of lobes from the solution of first-order nonlinear differential equation for reflection coefficients of the nonuniform line, and an appropriate distribution of reflection coefficient which affects to filter length and bandwidth. Practical measurements for designed wideband microstrip and stop filter show very good agreement with theoretical results.