• Journal of Chest Surgery
• /
• v.34 no.12
• /
• pp.968-971
• /
• 2001

Pedicled omentoplasty is effective in thoracic surgery, but it is associated with several postoperative complications. A case of diaphragmatic hernia as a complication of pedicled omentoplasty in a 65-year-old male is reported. Because aortoesophageal fistula occurred three months after the patch aortoplasty for mycotic aneurysm of descending thoracic aorta, he underwent ascending thoracic aorta to abdominal aorta bypass surgery with resection of thoracic aortic aneurysm and esophagorrhaphy with wrapping of the esophageal suture line and the stumps of aorta with pedicled omental flap. Three years after the operation, herniation of the stomach developed. The pedicled omental flap was ligated and divided, and the diaphragm defect was repaired.

• Journal of Advanced Information Technology and Convergence
• /
• v.10 no.2
• /
• pp.153-166
• /
• 2020

DDI(Display Driver IC) are used to drive numerous pixels that make up display. For stable driving of DDI, it is necessary to attach a protective film to shield electromagnetic waves. When the protective film is attached, defects often occur if the film is inclined or the center point is not aligned. In order to minimize such defects, an algorithm for correcting the center point and the inclined angle using camera image information is required. This technology detects the corner coordinates of the protective film by image processing in order to correct the positional defects where the protective film is attached. Corner point coordinates are detected using an algorithm, and center point position finds and correction values are calculated using the detected coordinates. LUT (Lookup Table) is used to quickly find out whether the angle is inclined or not. These algorithms were described by Verilog HDL. The method using the existing software requires a memory to store the entire image after processing one image. Since the method proposed in this paper is a method of scanning by adding a line buffer in one scan, it is possible to scan even if only a part of the image is saved after processing one image. Compared to those written in software language, the execution time is shortened, the speed is very fast, and the error is relatively small.

• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2023

This study aims to enhance the price and quality competitiveness of imported tiles by developing a robotic tile production automation line. The development process involved several steps, such as requirement analysis, derivation of technical specifications, conceptual design, engineering feasibility review, detailed design, and production. Emphasis was placed on the transfer process of the tiles' molds, and technological advancements were achieved through engineering interpretation, feasibility review, and performance evaluation. The developed automation system incorporates key specifications to ensure a transfer success rate of over 90%, thereby ensuring stable transportation of the tiles and minimizing defect rates during production. The maximum weight capacity for tile pick-up was set above 6 kg, allowing effective handling of tiles weighing 6 kg or less in automated tasks. Furthermore, the system enables safe and precise movement of the tiles to the desired location, with a transfer distance of at least 1.3 m and a transfer speed exceeding 0.2 m/sec, thereby increasing production efficiency.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2020

In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.136-145
• /
• 2011

One of a large proportion among the causes of fire is electrical factors, and of fire by electric factors, the accident which accounted for over certain percentage is electric leakage and ground fault. In order to reduce the electric leakage and ground fault, the technical guidelines on the protection of ground fault in the low-voltage electrical line (KECG 1091-2011) was amended for reflecting recent international standard, IEC 60364-4-41, and new conservation methods, which improved the reliability by recovering the facility's all-time use operation and breakdown defect, was on the rise. Accordingly, in this paper, after grasping the fire's status for last 10 years and analyzing the risk of electrical fires, and as a way to improve the electric leakage and ground fault accident which accounted for more than certain percentage, the revision of KECG 1091-2011 will be reviewed. And then, after applying to the preventive conservation methods in order to enhance the protection reliability of electric leakage and ground fault detection, the problems at issue routine inspection scheme and durable years scheme in time-scheduled conservation method are listed, along with suggestion of the problem-solving scheme, and the leakage current integrated monitoring systems and digital electric leakage devices by status monitor conservation method will be proposed.

• Molecules and Cells
• /
• v.21 no.2
• /
• pp.206-212
• /
• 2006

We have established in culture a spontaneously immortalized bovine embryonic fibroblast (BEF) cell line that has lost p53 and $p16^{INK4a}$ functions. MyoD is a muscle-specific regulator capable of inducing myogenesis in a number of cell types. When the BEF cells were transduced with MyoD they differentiated efficiently to desmin-positive myofibers in the presence of 2% horse serum and 1.7 nM insulin. The myogenic differentiation of this cell line was more rapid and obvious than that of C2C12 cells, as judged by morphological changes and expression of various muscle regulatory factors. To confirm that lack of the p53 and $p16^{INK4a}$ pathway does not prevent MyoD-mediated myogenesis, we established a cell line transformed with SV40LT (BEFV) and introduced MyoD into it. In the presence of 2% horse serum and 1.7 nM insulin, the MyoD-transduced BEFV cells differentiated like the MyoD-transduced BEFS cells, and displayed a similar pattern of expression of muscle regulatory proteins. Taken together, our results indicate that MyoD overexpression overcomes the defect in muscle differentiation associated with immortalization and cell transformation caused by the loss of p53 and Rb functions.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.89-112
• /
• 2002

The earliest reports of the use of electrical energy to directly stimulate bone healing seem to be in 1853 from England, the techniques involved the introduction of direct current into the non-united fracture site percutaneously via metallic needles, with subsequent healing of the defect. One endpoint of the periodontal therapy is to generate structure lost by periodontal diseases. Several procedural advances may support regeneration of attachment, however, regeneration of alveolar bone does not occur consistently. Therefore, factors which stimulate bone repair are areas for research in periodontal reconstructive therapy. Effects of cytokines or growth factors on bone repair are examples of such areas. Another one is electrical current which occurs in bone naturally, so that such bone may be particularly susceptible to electrical therapy. The purposes of this study were to observe the effects of electrical stimulation on the normal periodontium, to determine whether the electricity is the useful means for periodontal regeneration or not. Forty rats weighted about 100 gram were used and divided into 4 groups, the first group, there was no electrical stimulation with the connection of electrodes only. In the second group, there was stimulated by the 10 mA during 10 minutes per a day, in the third group was stimulated by the 25 mA , and the fourth by the 50 mA. At 3, 5, 10 and 15 days post-appliance , two rats in each group were serially sacrificed. and the maxillae and the mandible processed to paraffin, and the specimens were prepared with Hematoxylin-Eosin stain for the light microscopic evaluation. The results of this study were as follows : 1. There was the distinct reversal line on the lingual alveolar crest, whereas a little changes in the labial alveolarcrest to the duration and amount of currents. 2. In 50 mA group, the cells were highly concentrated at the apex of anterior teeth, and was observed the necrotic tissue. In posterior root apex, the hypercementosis was appeared, and newly formed cementum layer has been increased continuously with the time. 3. The periodontal ligament fiber and Sharpey's fiber were arranged in order, and the bone trabeculae were increased as the experiment proceeded by, relatively the bone marrows were decreased. 4. In the pulp tissue, the blood vessels were increased with blood congestion in the experimetal specimens remarkably, and the dentinal tubules were obstructed . 5. The osteoblasts in alveolar bone proper had been showed highly activity, and also observed the formation of bone trabeculea. In the conclusion, it was suggested that the electrical stimulation has influence on the periodontium and the pulp tissue. However, there might be the injurious effects.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.4
• /
• pp.360-373
• /
• 2006

The purpose of this research was to investigate whether pulsed electromagnetic field (PEMF) stimulation applied to the rabbit cranial defects grafted with ${\beta}$-tricalcium phosphate (${\beta}$-TCP) could affect the new bone formation. With 16 New Zealand white rabbits under the same condition, bilateral calvarial bone defects were formed around the sagittal suture line. The defect on the left side was grafted with ${\beta}$-TCP, while on the right side was grafted by harvested autogenous bone. PEMF was applied to 8 rabbits for 8 hours per day. The bony specimen were divided into 3 groups, the group 1 was autogenous bone grafted specimen, the group 2 was ${\beta}$-TCP grafted with PEMF, and the group 3 was ${\beta}$-TCP grafted without PEMF. We investigated the bone regeneration & growth factor expression at 2, 4, 6, and 8 weeks. As a result, BMP 2 was expressed in the group 1 from 2 weeks, the group 2 from 4 weeks, and the group 3 from 6 weeks. BMP 4 was expressed in the group 1 from 2 weeks, in the group 2 and the group 3 from 4 weeks. 4. There was no significant difference in expression pattern of BMP 7, PDGF, VEGF, and TGF-${\beta}$1 during grafted bone regeneration in group 1, 2, and 3. According to our results, PEMF stimulation could be effective on the new bome formation in animal study, and have a feasibility of clinical use.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.195-201
• /
• 2016

Eddy current testing (ECT) is commonly applied for the inspection of automated production lines of metallic products, because it has a high inspection speed and a reasonable price. When ECT is applied for the inspection of a metallic object having an uneven target surface, such as the spline gear of a spline shaft, it is difficult to distinguish between the original signal obtained from the sensor and the signal generated by a defect because of the relatively large surface signals having similar frequency distributions. To facilitate the detection of defect signals from the spline gear, implementation of high-order filters is essential, so that the fault signals can be distinguished from the surrounding noise signals, and simultaneously, the pass-band of the filter can be adjusted according to the status of each production line and the object to be inspected. We will examine the infinite impulse filters (IIR filters) available for implementing an advanced filter for ECT, and attempt to detect the flaw signals through optimization of system design parameters for detecting the signals at the system level.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.112-119
• /
• 2021

Purpose: This study is based on the detailed inspection data for the last 6 years of fire-fighting high ladder vehicles, fire-fighting inflected ladder vehicles, fire-fighting chemical vehicles and fire-fighting pump vehicles used in front-line fire departments. The purpose is to contribute to the technological development of fire-fighting vehicles by grasping the implementation status of each city and province, the rate of defects, and the occurrence of defects by year. Method: The implementation status by city and province, defect incidence rate, and defect occurrences by year were analyzed. Result: From 2012 to 2017, when the average of 230 or more overhaul vehicles was requested, the results of each city/province show slight fluctuations, but the number of defects gradually decreased due to the old fire-fighting vehicle replacement project and the response of fire vehicle manufacturers. Conclusion: In the case of fire-fighting ladders, the incidence rate of defects was found to be in the order of elevator device, electric device, ladder device, and pneumatic supply device. And in the case of the fire fighting ladder, it was confirmed that the incidence of defects appeared in the order of the refractive ladder, hydraulic cylinder, hydraulic oil, and pneumatic supply device. In the case of fire-fighting chemical vehicles, it was confirmed that defects occurred in the powder fire extinguishing device, fire pump, vacuum pump, and pneumatic supply device.