• Journal of Sericultural and Entomological Science
• /
• v.41 no.2
• /
• pp.94-101
• /
• 1999

Twelve pure silkworm lines identified based in higher G.C.A values from a line${\times}$Tecter crossing programme, were crossed with twelve breeds showing cocoon shell ratio>22% and hybrids prepared, evaluated in a Multiple index method. Seven hydrids showing average index value>50 in all the 10 economic characters were seclcted and evaluated in the laboratory. However, two hybrids viz., A3${\times}$935E and A3${\times}$916B were finally selected based on the superiority of the breeds in one day shorter larval duration and with and with higher reeling characters compared to control KA${\times}$NB4D2. The breeding procedure involed in evolution hybrids are discussed.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.107-112
• /
• 2004

The combining abilities in the 5 newly evolved thermo tolerant breeds viz., SR6, SR7, SR8 SR9 and SR10 of silkworm Bombyx mori L. and their 15 hybrids were made in a line${\times}$tester crossing programme. Data were analysed for seven quantitative traits i.e., pupation rate, cocoon yield, cocoon weight, cocoon shell weight, cocoon shell ratio, filament length and raw silk percentage under optimum room temperature $(25{\pm}{1^{\circ}C})$ conditions (In case of high temperature $(36{\pm}{1^{\circ}C})$ stress conditions five economic traits except filament length and raw silk percentage) with 3 widely adapted testers i.e., KA, CSR2 and CC1 as lines (females) and testers (males) respectively. The performance at high temperature and low humidity conditions aye only taken into consideration for selecting the best lines/hybrids. Among the lines SR6 exhibited positive General combining ability (GCA) effects for pupation rate, cocoon yield, cocoon weight and cocoon shell ratio traits, followed by SR7 for pupation rate, cocoon yield and cocoon shell weight and cocoon shell ratio. Among testers, KA exhibited positive GCA effects for two quantitative traits cocoon yield, cocoon weight and CSR2 for cocoon shell weight and cocoon shell ratio under adverse temperature conditions. The hybrid SR6${\times}$CC1 and SR7${\times}$CSR2 exhibited significant positive Specific combining ability (SCA) effects for majority of the traits in high temperature stress conditions of rearing. The better parent value of heterosis(Heterobeltiosis) was exhibited by the hybrid SR6${\times}$CC1 for pupation rate, cocoon yield, cocoon weight and cocoon shell weight and SR7${\times}$CSR2 for all the trails evaluated under high temperature conditions. Based on the results, the lines SR6 and SR7 was judged as best combiners and the hybrids SR6${\times}$CC1 and SR7${\times}$CSR2 can be selected for commercial exploitation in tropical climate.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.2
• /
• pp.205-209
• /
• 1997

In a line X tester crossing programme (24 lines 2 testers) the general combining ability (GCA) and specific combining ability (SCA) effects were analyzed for five economic characters in the bivoltine silkworm, Bombyx mori L. The results showed desired GCA effects in 934D1 (9500), 934B (9789) and 934A1 (9855) for cocoon yield per 10,000 larvae brushed by number. Likewise, the lines found to be superior based on GCA effects for other characters were as follows; 931D (14.040 Kgs), 935E (17.023 Kga.), 934D1 (15.643 Kgs.) and 934B (15.687 Kgs.) for cocoon yield by weight: 931D (1.717 g) and 930E (1.796 g) for single cocoon weight; 932B (0.330 g) for single shell weight: 931D (1.717 g) and 930e (1.796 g) for single cocoon weight; 932B (0.330 g) for single shell weight; 932B (18.7%), 933A (18.86%) and 935A (19.89%) for shell ratio. SCA effects showed the superiority of 932D$\times$KA (9822 cocoon yield per 10,000 larvae brushed by number); 932A$\times$NB4D2 (16.933 Kgs. cocoon yield per 10,000 larvae brushed by weight); 931C$\times$KA (1.911 g single cocoon weight); 934$\times$NB4D2 (0.371 g single shell weight and 21.0% shell ratio). The analysis indicated non-additive gene action for all the five characters.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.79-79
• /
• 2017

Grain Sorghum varieties grown in Korea have low productivity and are constrained by the fact that farmers' choice of improved varieties is limited. Hybrid cultivars have been demonstrated to be more productive and food security than pure line varieties. However, There's no available hybrid cultivars and never planted before in Korea. This study was, therefore, conducted to determine combining ability of Korean landrace varieties and cultivar, the level of heterosis of experimental hybrids depending on environments. Two cytoplasmic male-sterile lines were crossed with six male-fertile lines in accordance with North Carolina II mating scheme to generate 12 experimental hybrids. The hybrids were evaluated in replicated row-column alpha designs at two sites in Texas and South Korea under on-season production conditions. For each trait, general combining ability (GCA) and specific combining ability (SCA) effects were estimated using the line-tester method of analysis. Results indicated significant differences among genotypes for both grain yield potential and secondary traits. Hybrids were predominant for grain yield, and displayed up to 127% heterosis of A03017 ${\times}$ Sodamchal in Korea. Positive GCA for yield was observed for Donganme, Hwanggeumchal and Jungmo4002 in Korea. Among them Jungmo4002 and Donganme had highly positive for yield (227.90 and 84.90 kg ha-1), while it showed negative GCA for yield in College station (-40.90, -189.60 kg ha-1). ATx630 ${\times}$ Sodamchal had the greatest SCA for yield (468.10 kg/ha) in College station but at South Korea its SCA effect was -302.40 kg/ha. A similar trend was observed, followed by A03017 ${\times}$ Donganme (SCA effect = 215 kg ha-1 at College station vs. -44.20 kg ha-1 at South Korea). At South Korea the greatest positive SCA effect for grain was observed in ATx630 ${\times}$ Jungmo4002 as 322.20 kg/ha. Both GCA and SCA effects significantly interacted with site effects demonstrating the need for region adaptation of potential cultivars and test for developing Korea suitable cultivar.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.23-32
• /
• 2002

The introduction of hybrid and exploitation of heterosis has played a vital role in Indian sericulture industry, which clearly depicts a quantum jump in silk production during the last four decades. Since, the introduction of heterosis, progress in silkworm breeding has depended on success or failure in identifying better combiners. Systematic procedures developed have enabled the breeders to identify the best combiners by combining ability test, line ${\TIMES}$ tester analysis or $D^2$ analysis for maximum expression of heterosis. The level of heterosis expressed in the crossbreed population is determined by the interaction between genotype and prevailing environmental factors. Except some of the pre and post cocoon parameters, heterosis is invariably higher in single crosses compared to three-way and double crosses. However, during hot and humid season, when rearing of F1 bivoltine hybrid is unsuccessful at field level and indigenous races results in very low and poor quality yield, three-way and double crosses can play an important role as an intermediary technology. The objective of this article is to review briefly the concept and causes of heterosis, utilization of different forms of heterosis in silk production and its significance in silkworm, Bombyx mori breeding.

• Korean Journal of Materials Research
• /
• v.29 no.6
• /
• pp.378-384
• /
• 2019

Ice accumulation on Aluminum Conductor Steel Reinforced(ACSR) cable during winter is an important matter in terms of safety, economy, and efficient power supply. In this work, the ice adhesion strengths of ACSR cable oxidized during different periods(7 years oxidized and 15 years oxidized) are evaluated. At first, a plate type dry oxidation standard specimen, whose surface characteristics are similar to those of ACSR cable, is prepared. Dry oxidation standard specimens are heat-treated at $500^{\circ}C$ for 20, 60, and 120 minutes in order to obtain different degrees of oxidation. After the dry oxidation, surface properties are analyzed using contact angle analyzer, atomic force microscopy, spectrophotometer, and gloss meter. The ice adhesion strengths are measured using an ice pull-off tester. Correlations between the surface properties and the ice adhesion strength are obtained through a regression analysis indicating a Boltzmann equation. It is revealed that the ice adhesion strength of 15-year oxidized ACSR cable is approximately 8 times higher than that of ACSR-bare.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.1
• /
• pp.111-121
• /
• 2012

This study focused on the plane and side drape coefficients of weft knitted fabrics as a function of knit structure, stitch density, and stiffness. Fifteen weft knitted fabrics are produced with five different structures (interlock, single pique, royal interlock, cross miss interlock, and mock royal interlock) and three different gauges (7G, 10G, and 12G). Five knit structures were the application of knit, tuck, and miss stitch on the basis of interlock of the double knit fabric For this purpose, three-dimensional shapes of the draped sample were obtained by using a drapability tester which can record the contour line coordinates of a projected plane drape. Then, projected shapes of the plane and side drape were derived from those three-dimensional ones to review the relationship between plane drape coefficients and side ones. It was found that the theoretical values of plane and side drape coefficients depending on the change of deflection angles fit to their experimental ones. A5 a result of a regression analysis of the relationship between plane and side drape coefficients, the relationship could be expressed as $y=0.5838x-0.0065x^2+9.03{\times}10^{-5}x^3$. In case of mean of drape coefficient, it was increased according to the rule of that the more tuck and miss stitch overlap. A high degree of correlation was found between stiffness and drape coefficient. The regression equation of drape coefficient($y$) can be represented by $y=y=\sqrt[3]{Stiffness}-10.72$.