• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.46-53
• /
• 2016

It is required to predict a limit cycle amplitude controlled by system's nonlinear behavior as well as an eigen-frequency and initial growth rate of instabilities under the linear motions, in order to fully understand combustion instabilities in a lean premixed gas turbine combustor. Special focus of the current work is placed on the limit cycle amplitude prediction using flame describing function(FDF) where the ratio of a heat release fluctuation to a given flow perturbation is expressed as a function of frequency and amplitude. In this study, the CFD modeling work based on RANS is carried out to obtain FDF, which makes that the nonlinear thermo-acoustic model is successfully developed for predicting the limit cycle amplitude of the combustion instability.

• Preventive Nutrition and Food Science
• /
• v.13 no.4
• /
• pp.348-353
• /
• 2008

Aerobic bacterial growth on Korean pan.fried meat patties as a primary quality deterioration factor was modeled as a function of temperature to estimate microbial spoilage on a real.time basis under dynamic storage conditions. Bacteria counts in the stretch.wrapped foods held at constant temperatures of 0, 5, 10 and $15^{\circ}C$ were measured throughout storage. The bootstrapping method was applied to generate many resampled data sets of mean microbial counts, which were then used to estimate the parameters of the microbial growth model of Baranyi & Roberts in the form of differential equations. The temperature functions of the primary model parameters were set up with confidence limits. Incorporating the temperature dependent parameters into the differential equations of bacterial growth could produce predictions closely representing the experimental data under constant and fluctuating temperature conditions.

• The Korean Journal of Ecology
• /
• v.17 no.2
• /
• pp.149-157
• /
• 1994

To investigate the causes of distribution of Kummerowia striata (Thunb.) Schindl. mostly restricted on the roadside and reclaimed land, plant growth was analyzed under different of tread-pressures: $P_1$(10 times/day, $16.34Kg/cm^2$), $P_2$(20 times/day, $31.52 Kg/cm^2$), $P_3$(30 times/day, $40.79 kg/cm^2$) and the control $P_c$(0 times/day, $3.73 Kg/cm^2$). The matter production in the $P_1$decreased compared with that in the $P_c$, and those in the $P_2$and $P_3$ continuously decreased so that its length growth gradually decreased and, in particular, the growth of leaves and nodule was suppressed. The number of leaves and roots tended to increase in the $P_2$and $P_3$. The water contents of roots following the increase of tread-pressure increased continuously. Following the increase of tread-pressure, T/R ratio and C/F ratio tended to increase. Kummerowia striata showed the highest growth in the $P_c$ and showed 26% relative growth in the $P_1$compared with that in the $P_c$. This plant showed 8% relative growth in the $P_3$, which is excess to the tread-pressure $21Kg/cm^2$, the limit of growth in the plant. Because this plant grew continuously in the P$_3$, the tread-pressure is regarded as an important factor affecting the roadside distribution of this plant.

• International Journal of High-Rise Buildings
• /
• v.12 no.3
• /
• pp.195-201
• /
• 2023

This paper reviews the history of the birth and development of the skyscraper in Japan, mainly from the perspective of the legal system, and presents the following points: 1) After 1919, building height was limited to 31 m or less, which continued after the war and defined the skyline of Japan's major cities; 2) The 31-meter height limit became a problem during rapid economic growth. With the development of tall building construction technology, the height limit was eliminated, and skyscrapers were born in Japan in the 1960s; 3) Later, the number of skyscrapers increased more rapidly in the post-bubble period after the collapse of the bubble economy in the 2000s than in the boom years of the 1980s, when the floor-area ratio was relaxed for economic uplift and urban renewal. The number of skyscrapers increased rapidly against the backdrop of the deregulation of the floor-area ratio.

• Journal of Nutrition and Health
• /
• v.8 no.4
• /
• pp.9-14
• /
• 1975

Growth retardation and a variable degree of body disproportion are recognized features of malnutrition, and mild and moderate protein-calorie malnutrition(PCM). Among the various body measurements suggested to assess the prevalence of all grades of PCM as judged by growth retardation and by body disproportion, the 'mid-upper-arm circumference'-abbreviated to 'arm-circumference' has been suggested as a potential useful simple field index for the assessment of PCM showing that the measurement would give composite information simultaneously on three important effects on PCM-deficit in the muscle protein reservoirs, availability of calorie stores in the form of subcutaneous fat, and growth failure. And this is selected because of its easy accessibility, and less involvement with clinical edema. This study is conducted to make a comparison between the percentage of Korean weight for age standards and the percentage of mid-upper-arm circumference for age standards of 175 preschool children aged $3{\sim}72$ months who are selected among the low-income residents in Seoul. In this study, a comparison is made between the results obtained by expressing the observed weight of the child as a percentage of Korean standard, referred to as 'weight-for-age' and the observed arm-circumference expressed as a percentage of the age-specific arm standard of Jelliffe, referred to as 'arm-for-age'. All the measurements were taken following the techniques described by Jelliffe. The left mid upper arm was measured using a glass-fibre tape and the Fairbanks Morse beam balance was used for weighing. 80% level of weight for age Korean standard and 85% level of arm for are Jelliffe standard were used as an upper borderline limit for PCM. Comparing the 80% weight-for-age and the 85% arm-for-age standard as an upper limit for PCM, for children aged $3{\sim}72$ months, results in 84.6% agreement with the sensitivity of 86.4% and its specificity of 83.5%. If arm circumference alone had been measured and judgement made on this basis, then only 5.1% of the children would have been 'wrongly' classified. And there is a moderately close correlation between arm circumference and weight for age as the data in Table 4 shows. The problem therefore lies in the standard for arm circumference in normal children and in determining what is the lower limit of normal. Once this is clearly difined, one can rely more confidently on arm circumference measurements alone for the nutritional assessment of early childhood.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.365-373
• /
• 2002

For gas turbine engines, the safe life methodology has historically been used fur fatigue life management of failure critical engine components. The safe retirement limit is necessarily determined by a conservative life evaluation procedure, thereby many components which have a long residual life are discarded. The objective of this study is to introduce the damage tolerant design concept into the life management for aircraft engine component instead of conservative fatigue life methodology which has been used for both design and maintenance. Crack growth data were collected on a nickel base superalloy which have been subjected to combined static and cyclic loading at elevated temperatures. Stress analysis fur turbine disk was carried out. The program for computing creep-fatigue crack growth was developed. The residual lifes of turbine disk component under various temperatures and conditions using creep-fatigue crack growth data were estimated. As the result of analysis, it was confirmed that retirement fur cause concept was applicable to the evaluation of residual life of retired turbine disk which had been designed based on the conventional fatigue life methodology.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.1
• /
• pp.35-42
• /
• 2007

This paper develops a Sustainable Regional Economic Growth Model (SREG) which estimates the relation of labor population change and employment increase in each occupation and maximum limits and minimum requirements of employment increase by labor population change in a specified region using multiplier theory. To develop the proposed model, sustainable regional economic growth is defined as a steady increase of labor population over a long term period and the limit of employment increase is defined as the estimated labor population change in the region with no need for commutation from the surrounded areas. Developed model was applied to 67 county in Pennsylvania State and the results revealed that the investment in infrastructure occupations, such as transportation, warehousing, utilities, information, communication, and other public utilities, maximizes the effects for increasing employment, whereas finance, insurance, and real estate occupations have minimum effects for increasing employment. Calculated minimum requirements of occupations show that infra-structure occupations is a critical factor for labor population change and maximum limits of occupations show that agriculture and finance occupations are difficult to increase independently.

• Asia Pacific Journal of Business Review
• /
• v.2 no.1
• /
• pp.69-85
• /
• 2017

Electronic commerce (e-commerce) has seen as the potential to improve profitability and productivity in many areas as well as gaining notable attention in many countries. Despite, there has been some uncertainty about the e-commerce impacts for developing countries. The sufficient basic infrastructural deficiency, socio-political, economic and the lack of government public ICT policies have formed the significant barriers to the adoption and e-commerce growth in developing countries. Even though there are many researchers have found the common barriers to e-commerce in the developing nations, all business models targeting those countries are not equally successful. Small companies' persistence failed to challenge the e-commerce barriers in Cambodia because the firms didn't know the correct business model to succeed in this country online market. Therefore, this study will discuss the existing barriers which lead to limit e-commerce growth in Cambodia and the suggested solutions with the suitable business model for the e-commerce business in the country too.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.103-111
• /
• 1990

This paper presents a methodology for predicting stable crack growth and instability of a cracked body under monotonically increasing load. It is based on a model that incremental crack extensions and load increments after fracture initiation occur by turns in sequence and the criterion that the crack grows by an incremebt .delta.a when the opening displacement at the current crack tip increases by a critical value V$_{c}$. It is shown that the value I$_{c}$ = V$_{c}$/ .delta. a is a material constant characterizing ductile crack growth resistance. Along with the fracture initiation toughness value, the constant is used for the calculation of the loads against crack extensions by adding up each increment. The specimen failure is defined to occur when the necessary load increment for crack extension is zero or when the limit load in the current ligament is reached. The predicted failure loads are in good agreement with the avaliable experimental failure loads for the compact and center-cracked tension specimens of 7075-T651, 2024-T351 aluminum alloys and 304 stainless steel.steel.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.472-478
• /
• 1989

Using the SMC(sheet moulding compound) composite material consisting of E-glass chopped strand mat and unsaturated polyester resin, three-point bending tests are carried out to evaluate the elasto-plastic fracture toughness by means of R curve. The crack extension is experimentally observed with the ink staining method. The point of stable crack growth is discussed in consideration of the load-load point displacement curve, the damage behavior of the notch vicinity, and the R-curves. The damage zone of the notch vicinity was composed of the initiation and growth of subcracks as well as those of the main crack. The point of stable crack growth can be defined as the inflection point in the R curves and its point also concurrs with the proportional limit on the load-load point displacement curve.