• Journal of Sensor Science and Technology
• /
• v.31 no.5
• /
• pp.293-300
• /
• 2022

Flexible, wearable, and implantable electronic sensors have started to gain popularity in improving the quality of life of sick and healthy people, shifting the future paradigm with high sensitivity. However, conventional technologies with a limited lifespan occasionally limit their continued usage, resulting in a high cost. In addition, traditional battery technologies with a short lifespan frequently limit operation, resulting in a substantial challenge to their growth. Subsequently, utilizing human biomechanical energy is extensively preferred motion for biologically integrated, self-powered, functioning devices. Ideally suited for this purpose are piezoelectric energy harvesters. To convert mechanical energy into electrical energy, devices must be mechanically flexible and stretchable to implant or attach to the highly deformable tissues of the body. A systematic analysis of piezoelectric nanogenerators (PENGs) for personalized healthcare is provided in this article. This article briefly overviews PENGs as self-powered sensor devices for energy harvesting, sensing, physiological motion, and healthcare.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.200-203
• /
• 2007

Carbon nanotubes (CNTs) have attracted an increasing attention due to their superior mechanical properties and potential application in industries. The strength of CNT has been predicted or calculated through several simulation techniques but actual experiments on stress-strain behavior are rare due to its dimensional limit, nanoscale positioning/manipulation, and instrumental resolution. We have attempted to observe straining responses of a multi-walled carbon nanotube (MWNT) with different growth methods by performing an in-situ tensile testing in a scanning electron microscope. Linear deformation and fracture behaviors of MWNT were successfully observed and its force-displacement curve was also measured from the bending stiffness and displacement of the force sensor and manipulator. We also obtained different tensile load of carbon nanotube with different growth methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.8 s.239
• /
• pp.1139-1145
• /
• 2005

Most failures of ductile materials in metal forming processes occurred due to material damage evolution - void nucleation, growth and coalescence. In this paper, the modified yield function of Liao et al in conjunction with the Hosford's yield criterion is studied to clarify the plastic deformation characteristic of voided anisotropic sheet metals. The void growth of an anisotropic sheet under biaxial tensile loading and damage effect of void growth on forming limits of sheet metals are investigated. Also the characteristic length defining the neck geometry is introduced in M-K model to incorporate the effect of triaxial stress in necked region on forming limits. The forming limits theoretically predicted are compared with experimental data. Satisfactory agreement was obtained between the predictions and experimental data.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.4
• /
• pp.1-12
• /
• 2015

This research analyzes the current state of the semiconductor industry delivering the prediction for the future development of the semiconductor industry along with some semiconductor memory's responsive strategies. In the 2014, top 10 semiconductor companies were targeted and studied its growth based on its profitability and growth indications in perspective during three years. The system semiconductor industry with the increase in Hyper-scale customers, proactive actions in the technology consortium, is polarizing caused by increased R&D expense to ensure process scaling limits and high performance, and some results have shown: PC and Mobile slowdown and growth recession phenomenon due to IoT's unclear direction. The leading company is to secure new growth engines through 'Acquiring'. While as the subordinated companies following this consecutive survival through the 'Acquired', the future of system semiconductor industry is to strengthen the market dominance and its techniques by concentrating on the reorganization of the market by few large companies. Accordingly, the semiconductor memory industry is expected to reach the limit of its expansion to domain of system semiconductor, and it is highly suggesting the need of the 'Memory Life Extension' growth strategy.

• Journal of the Korean Society of Combustion
• /
• v.18 no.2
• /
• pp.42-50
• /
• 2013

Linear stability analysis of radiating counterflow diffusion flames is numerically conducted to examine the instability characteristics of cellular patterns. Lewis number is assumed to be 0.5 to consider diffusional-thermal instability. Near kinetic limit extinction regime, growth rates of disturbances always have real eigen-values and neutral stability condition of planar disturbances perfectly falls into quasi-steady extinction. Cellular instability of disturbance with transverse direction occurs just before steady extinction. However, near radiative limit extinction regime, the eigenvalues are complex and pulsating instability of planar disturbances appears prior to steady extinction. Cellular instability occurs before the onset of planar pulsating instability, which means the extension of flammability.

• Journal of Environmental Impact Assessment
• /
• v.15 no.1
• /
• pp.67-78
• /
• 2006

Global warming brings about changes of diverse environmental, especially changes of plant distribution. The purpose of this paper is to examine the relationship between temperature rise and changes of northern limit of vegetation growth in Korea. Bamboos (Phyllostachys) and boundary between the northern type and southern type of garlic (Allium sativum L.) were selected. The data of the distributions of bamboos and garlic are collected by field survey and interviews. Temperature is analyzed from 1904 to 2000. The northern limit of Phyllostachys moves 60-100 km northward, for about 100 years, the period of 1907-2003 and mean temperature of Korea increases about $2^{\circ}C$ during the same period. It means that the northern limit moves 30-50 km northward, for each $1^{\circ}C$ rising of January mean temperature. The boundary between the northern type and southern types of garlic moves northward 40-140 km from 1980s to 2000. The moving width is broad in the west coastal region while the width is narrow in the inland and mountain regions. The mean moving width is about 100 km.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.487-492
• /
• 2010

Ulsan Port is the biggest base port for liquid cargoes in Korea and is pushing in earnest for the development of the 'Ulsan New Port' and 'Northeast Asia Oil-Hub' to prepare for continuous shipment growth. However, Ulsan is in the situation which the harbour limit and anchorages are narrower than other trading ports and the occurrence probability of marine accidents is very high due to heavy marine traffic. We will find and suggest the plan to enlarge the harbour limit essentially needed to expand anchorages considering the geomorphological features of Ulsan and the volume of marine traffic in this research. For the enlargement of harbour limit needed to expand anchorages, the anchorage area needed for Ulsan New Port was calculated after the quantitative analysis of enlargement range through the mutual comparison of the area of harbour limit and anchorages with berths and the volume of marine traffic. The reasonable type of harbour limit, which is based on the survey by a group of experts, was also determined after the decision of the range of harbour limit to accommodate the relevant anchorages.

• Journal of Forest and Environmental Science
• /
• v.24 no.3
• /
• pp.119-126
• /
• 2008

Growth and yield prediction methods, ranging from whole-stand models to individual-tree models, have been developed for forest types managed for wood production. The resultant models are used for a host of purposes including inventory updating, management planning, evaluation of silvicultural alternatives, and harvest scheduling. Because of the large investment in developing growth and yield models for improved genotypes and silvicultural practices for loblolly pine (Pinus taeda) in the Southern United States, this region serves to illustrate approaches for modelling intensively managed forests. Analytical methods and computing power generally do not restrict development of reliable growth and yield models. However, long-term empirical observations on stand development, which are time consuming and expensive to obtain, often limit modelling efforts. Given that growth and yield models are used to project present volumes and to evaluate alternative treatment effects, data of both the inventory type and the experimental type are needed. Data for developing stand simulators for loblolly pine plantations have been obtained from a combination of permanent plots in operational forest stands and silvicultural experiments; these data collection efforts are described and summarized. Modelling is essential for integrating and synthesizing diverse information, identifying knowledge gaps, and making informed decisions. The questions being posed today are more complex than in the past, thus further accentuating the need for comprehensive models for stand development.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.2 no.3
• /
• pp.53-61
• /
• 1978

This study has been concentrated on the relations between the crack growth rate and the stress intensity factor, the fatigue limit and finally on the condition of the crack propagation along the laminated cross section of the laminated steel under the repeated plane bending through tests. The following results are obtained. 1. The fatigue limit of the laminated steel is higher than the single steel 2. The realtion between the fatigue crack growth rate, dL/dN and Stress intensity factor are ; dL/dN = 2.14 * 10$^{-11}$ $K^{2.95}$ for SUP 9 dL/dN = 1.70 * 10$^{-11}$ $K^{2.95}$ for SMS dL/dN = 9.77 * 10$^{-11}$ $K^{2.95}$ for SPMS dL/dN = 3.57 * 10$^{-8}$ $K^{1.53}$ for SPMM dL/dN = 5.5O * 10$^{-8}$ $K^{1.53}$ for MLD 3. The crack propagation of the laminated steel also tends to be completed through 3 steps; The first step proceeds swiftly, in a second slowly for a long time and last very rapidly for a short moments.

• The Journal of Information Systems
• /
• v.18 no.1
• /
• pp.47-76
• /
• 2009

The economic growth that depended on IT industry is reaching to a limit. In order to overcome the limit, the convergence industry that makes new market and products is essential. However, companies preparing a jump into the convergence industry must understand the exact visions and characteristics of convergence. Therefore, we investigated the structural changes of industries caused by convergence and importance characteristics of convergence. Also, we demonstrated the current status of the convergence industry and analyzed economical, social/cultural, and technological environments that the companies are facing, and elaborated the opportunities of convergence. At last, we suggested basic requirements and strategies for companies starting a convergence business and IT utilization methods to accelerate the convergence business activation.