• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.101-101
• /
• 2022

Schisandra chinensis is a fruit which is called Omija in South Korea. The Korean word Omija means "five flavors" (sweet, spicy, sour, bitter, and salty). The aim of his study was to investigate the correlation between growth characteristics and lignans (gomisin A, gomisin N, schisandrin) contents of Schisandra chinensis. The method for determining lignans was validated by measuring the linearity, limit of detection (LOD), limit of quantification (LOQ), precision and accuracy using UPLC-UV. Growth characteristics of S. chinensis such as number of fruits per fruit bunch, length of fruit bunch, width of fruit bunch, fresh weight of fruit bunch, length of fruit, width of fruit, fresh weight of fruit, fresh weight of 30 fruits, and sugar contents of fruit were measured. From the results of correlation analysis, it was found that the contents of lignans showed a significantly negative correlation with fresh weight and sugar contents of fruit. These results will be used to study for quality control of S. chinensis fruit.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2145-2152
• /
• 1993

The objective of this paper is to examine the detection limit, growth characteristics and notch curvature radius in short crack problem. Measurement techniques such as ultrasonic method and back-face strain compliance method were adopted. The fatigue crack growth rate of the short crack is slower than that of a long crack for a notched specimen. The characteristic of crack growth and crack closure is same as the case of a delay of crack growth caused by constant amplitude load for an ideal crack or single peak overload for a fatigue crack. The short crack is detected effectively by ultrasonic method. A short surface crack occurs in the middle of specimen thickness and is transient to a through crack depth is larger than the notch curvature radius.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.4
• /
• pp.385-393
• /
• 2007

The strength evaluation of the most weakest junction part is required for the safety design of all structures. Most of all. in order to enhance the reliability and safety of the welding part. whose use is the highest, it is very important to establish the efficient structure manufacturing technology by studying and investigating the evaluation of fatigue strength in various environments. This study analyzed the relations of da/dN, and th according to the welding methods of SMAW, FCAW, and SAW. In the stage II. the value of stress intensity factor range was the highest in SMAW welding method of stress ration R=0.1, and appeared under the sequence of FCAW and SAW and as the completion section of stress intensity factor was low, threshold stress intensity factor was lowly formed in da/dN - The fatigue life of each welding method is sensitively worked in high stress ratio. judging from the fact that the width of life reduction increases in the high stress ratio zone compared to the width of life reduction in the low stress ratio zone. In the fatigue limit of welding methods before corrosion. the welding of SMAW and FCAW shows the same fatigue limit compared to Base metal, and SAW holds the lowest fatigue limit value.

• The Korean Journal of Ecology
• /
• v.6 no.1
• /
• pp.45-54
• /
• 1983

A distribution map of black pine, Pinus thunbergii, in south Korea was prepared through field surveys. According to Mirov(1967), the range of black pine is limited in east Asia, Japan and Korea; its northern limit is at about 41。34' north and its southern limit on Takara island, south Kyushu, at 29。 north. According to the present map, its northern limit coincided with the isopath of warmth index 100 by Yim(1977). The density of pine in grid mesh, about 4 km * 4 km, was higher at costal area than that in inland area, and it was also higher at sea side slope than the opposite slope of the same mountain. This suggests that the ecological distribution of black pine is greatly affected by salt content of the soil or the optimal range of summed temperature for the pine growth.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.102-109
• /
• 2005

An attachment part of the construction equipment frequently claimed from the crack occurrence that takes especially at the bucket. therefore we execute the fatigue examination and changes the welding method at the same materials. we executed a fatigue crack propagation experiment and got the conclusions at the normal temperature and Frequency 10Hz. We carried out butt welding for structure steel of SM490A and make three kinds of specimen of different weld method each. The fatigue limit of CASE 1 was determined to the low than CASE 2, CASE 3. the CASE 2 putting the interval of the 2mm creates back plate and make fatigue limit to high. Bead shapes and weld surfaces shape influence on fatigue life of materials. Specially, the crack growth becomes starting point that gap of back-plate and boundary surface of bead. It is confirmed by fracture showing on this study.

• Environmental Analysis Health and Toxicology
• /
• v.16 no.4
• /
• pp.205-209
• /
• 2001

Lemna gibba was newly cultured and provided for toxicity tests. In this study, the chromate toxicity tests for Lemna gibba were performed according to the OECD Lemna growth inhibition test guideline. The test species was Lemna gibba, and the tests were repeated 5 times. To evaluate the toxicity test results, the average specific growth rate, EC50, 95％ confidential limit, and variances were calculated. The test performance was analyzed by the doubling time and test statistics. The average values of EC50 data determined by logistic and linear interpolation curves were 25.9 ppm and 35.4 ppm respectively (by chromate concentration). The doubling time of all controls were below 2.5 day, so all tests passed the criteria for the test performance. This study introduced a new test method, Lemna growth inhibition test, which is provided for the hazard assessment of aquatic environment.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.1
• /
• pp.92-96
• /
• 1997

A Korean commercial sweet rice drink "Sikhye" showed sucrose, fructose, glucose, maltose, limit dextrin and various size of maltooligosaccharides in HPLC and TLC analysis. Commercial Sikhye was found to contain 0.09% of limit dextrin and 0.2% of rice residue. Limit dextrin in commercial Sikhye showed both signal of $\alpha$-1,4- and $\alpha$-1,6-glucosidic linkage with its estimation ratio of 15:1 by 1H-NMR analysis. This limit dextrin was hydrolyzed to produce various size of maltooligosaccarides with more longer chain than that of traditional Sikhye by pullulanase. Limit dextrin was digested wit enzymes(30units/ml) of $\alpha$-amylase, $\alpha$-glucosidase and glucoamylase from Aspergillus awamori, sweet potato $\beta$-amylase and human salivary $\alpha$-amylase at 37$^{\circ}C$ for 1 hour, respectively. Hydrolysis rates of these amylases on it were higher than in case of traditional sikhye. $\alpha$-Glucosidase plus human salivary $\alpha$-amylase hydrolyzed it to 61.3%. Hydrolysis rates of these amylases on rice residue were lower than that of traditional Sikye. These results suggest that limit dextrin in commercial Sikhye is less effective than isomaltooligosaccharides in traditional Sikhye as a growth factor for Bifidobacterium while rice residue in commercial Sikhye is more effective than that in traditional Sikhye as dietary fiber.ary fiber.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.21 no.1
• /
• pp.35-42
• /
• 1984

In the present study, rotating bending fatigue tests have been carried out in three kinds of carbon steel specimens; an annealed low carbon steel, an annealed high carbon steel and quenched-tempered high carbon steel; with a small artificial surface defect that might exist in real structures. Fatigue crack lengths have been observed by a method of replication in order to investigate the growth characteristic of fatigue crack in the viewpoints of strength of materials and fracture mechanics. The main results obtained are as follows: 1) The effect of a small surface defect upon the reduction of fatigue limit is considerably large, and the rate of fatigue limit reduction grows in the following order; annealed low carbon steel(mild steel), annealed high carbon steel, quenched-tempered high carbon steel. 2) When the growth rate of surface crack length(2a) was investigated in the viewpoints of fracture mechanics based upon $ ${\Delta}K_{\varepsilon}$, the dependence of stress level and of surface defect size disappear, and there exists a linear relationships between d(2a)/dN and ${\Delta}K_{{\varepsilon}t},\;\Delta_{{\varepsilon}t}\sqrt{{\pi}a}$, on log. plot, i.e, $d(2a)/dN={C{\cdot}{\Delta}K_{\varepsilon}}^3_t$, where ${\Delta}_{{\varepsilon}t}\sqrt{{\pi}a}$ a is the cyclic total strain intensity factor range.

• YAKHAK HOEJI
• /
• v.44 no.2
• /
• pp.107-114
• /
• 2000

We have synthesized 4-isonitroso-4H-1-benzopyran and 4-amino-2,3-dihydro -4H-1-benzopyran of chromone derivatives by using condensation method. Physico-chemical properties of these compounds were measured and analyzed by UV and HPLC method. The correlation coefficient of their methanol solutions by UV were 0.9992 and 0.9994, respectively. And oxime compound was resolved within 4 min and had a detection limit of 3 ng at S/N=3 by HPLC using a reversed phase column with three solvents(MeOH, $H_2O$, HAc). The amino compound was resolved within 4.5 min and had a detection limit of 10 ng at S/N=3 by HPLC under the same conditions. Anti-diabetic effect of chromone derivatives were investigated in the streptozotocin (STZ)-induced diabetic rats. Diabetes was induced in male Sprague-Dawley rats by injections of STZ (45 mg/kg, i.v). The investigation of the hair growth effect of isonitrosobenzopyran and 4-aminobenzopyran on the hair of black mouse (C57BL/6) was also carried out. The administraion of their ethanol solution to the black mouse (C57BU/6) through skin them promoted the growth of hair.

• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.87-94
• /
• 2000

A study has been made on the behavior of microscopic fatigue crack growth at the stress level of the fatigue limit with ferrite-martensitic structures. For the above purpose, two types of the microstructures were prepared ; one is the microstructure having the ferrite encapsulating the islands of second phase martensite(FEM), the other is the microstructure with the martensite encapsulating the islands of ferrite(MEF). It has been pointed out that the fatigue limits of these microstructures are related to the critical stress at which the microcrack in the ferrite proceeds to the martensite. The high fatigue limit might be excepted for the MEF microstructure in which the critical crack length would be restricted within the second phase spacing in contrast with the FEM microstruture. However, the fatigue tests shows that no appreciable difference of the fatigue limits among them were recognized. Also, it turned out from the metallographic observations that the micro crack path is very much affected by the microstructures, so that the microcracks grow according to the 3-dimentional situation of its microstructures.