• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.255-261
• /
• 2002

A four-degree of freedom model is suggested to understand the basic dynamical behaviors of the normal interaction between two masses of the friction induced normal vibration system. The two masses may be considered as the pad and the disk of the brake. The phase space analysis is performed to understand complicated in-plane dynamics of the non-linear model. Attractors in the phase space are examined for various conditions of the parameters. In certain conditions, the attractor becomes a limit cycle showing the stick-slip phenomena. In this paper, on the basis of the in-plane motion not only the existence of the limit cycle but also the size of the limit cycle is examined o demonstrate the non-linear dynamics that leads the unstable state and then the normal vibration is investigated as the state of the in-plane motion For only one case of the system frequency(two masses with same natural frequencies), the propensity of the normal vibration is discussed in detail. The results show an important fact that it may be not effective when too much damping is present in the only one part of the masses.

• Korean Journal of Mathematics
• /
• v.11 no.1
• /
• pp.35-43
• /
• 2003

We study the weak convergence to Fractional Brownian motion and some examples with applications to traffic modeling. Finally, we get loss probability for queue-length distribution related to self-similar process.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.7
• /
• pp.927-936
• /
• 2002

This paper presents the extraction of a feature by motion vector for efficient content-based retrieval for digital video. in this paper, divided by general size block for the current frame by video, using BMA(block matching algorithm) for an estimate by block move based on a time frame. but in case BMA appeared on a different pattern fact of motion in the vector obtain for the BMA. solve in this a problem to application for full search method this method is detected by of on many calculations. I propose an alternative plan in this paper Limit the search region to $\pm$15 and search is a limit integer pixel. a result, in this paper is make an estimate motion vector in more accurately using motion vector in adjoin in blocks. however, refer to the block vector because occurrence synchronism. Such addition information is get hold burden receive to transmit therefore, forecasted that motion feature each block and consider for problems for establish search region. in this paper Algorithm based to an examination Motion Estimation method by for motion Compensation is proposed.

• Communications of the Korean Mathematical Society
• /
• v.26 no.4
• /
• pp.649-660
• /
• 2011

S. M. Saperstone and M. Nishihama [6] had showed both continuity and stability of the orbital and limit set maps, K(x) and L(x), where K and L are considered as maps from X to $2^X$. The main purpose of this paper is to extend continuity and stability for dynamical systems to general dynamical systems.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.622-627
• /
• 2003

A numerical study is made of a flow in a cylinder with a rotating grooved endwall disk. The aim is to describe differences in the flow fields when there is concentrically-grooved obstacle characterized by amplitude(a) and wave number(N). The Reynolds number(Re) is varied from $10^{3}$ to $10^{4}$ and the aspect ratio(Ar) fixed to 1.0 for the most part of the simulation. For the various cases of amplitude(a) and wave number(N), numerical results are acquired. As the endwall groove roughness increases until certain limit, the interior azimuthal velocity component(v) increases drastically. But over the limit, the swirl motion chararcterized by velocity v decreases and finally it approaches much alike Ar=1.0-a case. The reason of activating swirl motion is based on increasing of torque transported by endwall disk. Torque coefficients($C_{T}$) are aquired for the various (a,N,Re) combinations and the limiting phenomena of swirl motion activation is explained.

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.59-65
• /
• 1995

In this study, we investigated the operational limit of magnetic bearing-rotor system due to the maximum force limit and slew rjate limit of the electromagnetic actuator as a function of the time dependent control characteristics. The feedback gain of the controller varies the current of the electromagnet coil with the motion of the rotor. The distorsion of magnetic force due to the slew rate limit is not occurred jup to 30, 000 rpm in the magnetic bearing that we have a close relation with the rotational speed and vibration level of the rotor and the proportional gain of the controller. Therefore the maximum force limit determines the maximum allowable orbit radius of the magnetic bearing-rotor system. The maximum allowable vibration levels are exponentially decreased according to the increment of rotational speed and proportional gain of the controller.

• Journal of Wind Energy
• /
• v.14 no.2
• /
• pp.26-33
• /
• 2023

In this study, the global response characteristics of floater and mooring for floating offshore wind turbine with a detachable mooring system are performed. Global motion and structural response result extracted from the coupled motion analysis of 10MW DTU floating offshore wind turbine with detachable mooring system modeled by high-order boundary element model and finite element mesh, were used to study the characteristics of tension on mooring lines subjected to three different types of ocean loads. Breaking limit of mooring line characterized by wind, current and wave load has a major effect on the distribution of mooring tension found in time domain analysis. Based on the numerical results of coupled motion analysis, governing equation for calculating the motion response of a floater under ocean loads, and excitation force and surge motion and tension respectively are presented using excursion curve. It is found that the response of floater is reliable and accurate for calculating the tension distributions along the mooring lines under complex loadings. This means that the minimun breaking limit of mooring system satisfied a design criteria at ultimate ocean environmental loading condtions.

• Korean Journal of Mathematics
• /
• v.22 no.1
• /
• pp.71-84
• /
• 2014

By using the multidimensional normal approximation of functionals of Gaussian fields, we prove that functionals of Gaussian fields, as functions of t, converge weakly to a standard Brownian motion. As an application, we consider the convergence of the Stratonovich-type Riemann sums, as a function of t, of fractional Brownian motion with Hurst parameter H = 1/4.

• Physical Therapy Korea
• /
• v.29 no.2
• /
• pp.87-93
• /
• 2022

To solve the pathological problems of the musculoskeletal system based on evidence, a sophisticated analysis of human motion is required. Traditional optical motion capture systems with high validity and reliability have been utilized in clinical practice for a long time. However, expensive equipment and professional technicians are required to construct optical motion capture systems, hence they are used at a limited capacity in clinical settings despite their advantages. The development of information technology has overcome the existing limit and paved the way for constructing a motion capture system that can be operated at a low cost. Recently, with the development of computer vision-based technology and optical markerless tracking technology, webcam-based 3D human motion analysis has become possible, in which the intuitive interface increases the user-friendliness to non-specialists. In addition, unlike conventional optical motion capture, with this approach, it is possible to analyze motions of multiple people at simultaneously. In a non-optical motion capture system, an inertial measurement unit is typically used, which is not significantly different from a conventional optical motion capture system in terms of its validity and reliability. With the development of markerless technology and advent of non-optical motion capture systems, it is a great advantage that human motion analysis is no longer limited to laboratories.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.4_2
• /
• pp.707-714
• /
• 2022

Versatile Video Coding (VVC) is the most recent video coding standard, which had been developed by Joint Video Expert Team (JVET). It can improve significant coding performance compared to the previous standard, namely High Efficiency Video Coding (HEVC). Although VVC can achieve the powerful coding performance, it requires the tremendous computational complexity of VVC encoder. Especially, affine motion compensation (AMC) was adopted the block-based 4-parameter or 6-parameter affine prediction to overcome the limit of translational motion model while VVC require the cost of higher encoding complexity. In this paper, we proposed the early termination of AMC that determines whether the affine motion estimation for AMC is performed or not. Experimental results showed that the proposed method reduced the encoding complexity of affine motion estimation (AME) up to 16% compared to the VVC Test Model 17 (VTM17).