• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1489-1500
• /
• 2018

Partial shading analysis of large-scale photovoltaic (PV) arrays has recently become a theoretically and numerically challenging issue, and it is necessary for PV system designers. The main contributions of this study are the following: 1) A PSIM-based macro-model was employed because it is remarkably fast, has high precision, and has no convergence issues. 2) Three types of equivalent macro-models were developed for the transformation of a small PV sub-array with uniform irradiance to a new macro-model. 3) On the basis of the proposed new macro-model, a tearing method was established, which can divide a large-scale PV array into several small sub-arrays to significantly improve the efficiency improvement of a simulation. 4) Three platforms, namely, PSIM, PSpice, and MATLAB, were applied to evaluate the proposed tearing method. The proposed models and methods were validated, and the value of this research was highlighted using an actual large-scale PV array with 2420 PV modules. Numerical simulation demonstrated that the tearing method can remarkably improve the simulation efficiency by approximately thousands of times, and the method obtained a precision of nearly 6.5%. It can provide a useful tool to design the optimal configuration of a PV array with a given shading pattern as much as possible.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.11
• /
• pp.1512-1516
• /
• 2018

The power system and control system constantly reveals surge voltage such as switching surge of lighting devices and power conversion devices, operating and stops surge of rotating devices, charge & discharge surge, opening & closing surge of circuit breakers and the like. Such a surge voltages can cause damage or malfunction of the element such as CPU, Memory, semiconductor etc. In the industry, in order to protect the system from the surge voltage, a surge protector with low discharge starting voltage, fast response time, and low capacitance is required, and technical development research for that is ongoing. In this paper, in order to solve the problem of the existing GDT discharge tube not discharging from the transient voltage which is higher than the commercial voltage and lower than the discharge voltage of the discharge element, we have developed a discharge element having the control electrode & control circuit. The discharge element having the control electrode and the control circuit can control the discharge voltage according to the needs of the consumer and can satisfy the requirement of the discharge element and the technology of the surge protector downsizing technology and the surge protection technology. It is judged to be effective for development.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2006

The advantages of LED(Light Emitting Diode) are low electric power consumption long life time and excellent visibility. In order to design and develope the marine lantern using LED, technical trends and standards about the marine lantern were analyzed and sample products were manufactured and evaluated in comparing with existing marine lantern The performance of developed LED lantern is better than that of the existing marine lantern using an incandescent lamp. The electric power consumption of our products is 30[%] and the luminous intensity is two or fen times brighter than existing marine lantern.

• Journal of Distribution Science
• /
• v.17 no.2
• /
• pp.25-34
• /
• 2019

Purpose - This research strives to analyze and investigate customers' perception of the dimensions of service quality at retails in Makassar Municipality of Indonesia Country. This research tries to present its results empirically, which might be helpful to prepare a strategy to improve the service quality at retail companies. Research design, data, and methodology - The research uses Parasuraman's in 1985 unmodified SERVQUAL approach. This research is conducted using a questionnaire by purposive random sampling with 150 housewives customers who are met while they are shopping. The object of the study included several retail companies such as Alfa Mart, Alfa Midi, and Indomart operating in Makassar, Indonesia, which has been serving in 2017. Analysis was conducted by quantitative descriptive analysis, measurement of variable dimensions on the questionnaire using a Likert scale, and using cartecius graph and quadrant graphs to determine the gap size of each variable. Result - This research finds that the tangible and empathy dimensions such as product layout and lighting condition should be prioritized, and the empathy dimension whose gap value is too prominent such us peak load time condition and problem-solving adjustment. Conclusion - The second priority is responsiveness dimensions, and the last priority is reliability and assurance dimensions.

• The Journal of the Korea Contents Association
• /
• v.14 no.12
• /
• pp.574-585
• /
• 2014

Filming of movie is not working for translating scenario of story or character's moving. Director of Photography accumulates emotion in scenario through image. The accumulation of continuation is the essence of movie. Therefore, cinematographer strives consistently to analysis scenario and to express through visual which operation of the most basis can be filming technology. Eventually, Filming of movie is based on mean of technology to show artistry work. Accordingly, searching the most fundamental of filming's technical factor considerably help to understand movie art. There are variation technology factors to expose character's emotion. And the most simple and influential try by only using the pure function of camera is utilizing shutter without supporting lighting and production design. As a result, this thesis discuss about essential and basic factors of utilizing shutter.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.2
• /
• pp.43-48
• /
• 2001

Economical consumption of energy, longer life of lamps, higher lighting comfort and new aesthetic of illumination is subject of numerous research and development works. The halogen lamps are an example of positive solution some of above mentioned problems. The electronic transformers are more frequent used for their supply. In comparison with conventional transformers they have less weight, less volume and 60% less power losses. Their advantages are particular visible, when the hybrid technique is applied. The paper presents the results of engineering research and development works carried out in Private Institute of Electronic Engineering, in R. & D. Center for Hybrid Microelectronics and Resistors and in Technical School of Communications in Krakow, in the field of the design and exploitation tests of hybrid converters 220V AC /12V DC (electronic transformers) and electronic ballasts destined for the supply of halogen lamps 20W to 150W and fluorescent lamps respectively. To perform the converters, thick film technology and surface mount technology were used. For the protection of converter electronic circuit the thick film temperature sensor and transistors were applied. Moreover the paper presents the base application circuits of elaborated converters, their technical parameters and exploitation results. The development perspectives of such domain of hybrid circuits are also discussed.

• Journal of the Korean housing association
• /
• v.26 no.6
• /
• pp.147-155
• /
• 2015

The purpose of this study is to understand the characteristic elements of interior space which effects the basic floor plan of traditional houses, in Huizhou, CHINA. The field study for the content analysis of a interior space of traditional houses were conducted from August 16 to 21, 2015, in Xidicun & Hongcun village. The major characteristics of 'tang' interior were as follows; Firstly, all of traditional houses in a skylight that front of 'tang'. Several types of floor plan were fixed by a combination of the space layout and numbers between 'tang' and skylights. Secondly, 'Tang' is from 3,250 to 6,000 mm in width, from 3,800 to 7,800 mm in depth. All skylights are more length than 'tang' in width. So all of spacious 'tang' were very bright without any lighting fixtutes. Thirdly, the patterns of woodcuts were the major settings of interior decorations. All of a window and door, capital has a detail woodcuts that are flowers, animals, plants, peoples, vases, and geometric patterns. In the last analysis, the traditional housing designs in Huizhoui old villages were planned for family that everlasting life, made a functional and rational decision.

• Journal of the Korean housing association
• /
• v.21 no.3
• /
• pp.67-76
• /
• 2010

The purposes of this study are to understand residents' needs in regard to living space and to suggest how to provide layout options for the infill, based on their needs, so that the residents can change their living space to suit their own need. This study analyzed residents' needs in terms of living spaces through literature reviews on apartment remodeling and related previous studies. The results are as follows: First, the residents remodeled the various infill, and remodeling works are then classified into five infill groups according to the flexible features: 1) structural elements, such as flooring, ceilings, interior walls, and windows/doors; 2) equipment elements, such as lighting and electricity, electrical wiring, heating arrangements, and water supply & drainage systems: 3) finishing material elements, such as finishing materials for floors, walls, and ceilings, skirting boards, moldings, and art walls; 4) furniture elements, such as built-in wardrobes, storage closets, and kitchen cabinets; and 5) bathroom facility elements such as faucets and sinks. Second, based on the remodeling features, four ways to provide options can be suggested. 1) options are provided for each room; 2) options are provided in connection with structural elements; 3) options are provided for each finishing material element; and 4) options are provided with the combinations of different bathroom facilities.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.196-199
• /
• 2010

The human eyes are important facial landmarks for image normalization due to their relatively constant interocular distance. This paper introduces a novel approach for the eye detection task using optimal segmentation method for eye representation. The method consists of three steps: (1)edge extraction method that can be used to accurately extract eye region from the gray-scale face image, (2)extraction of eye region using labeling method, (3)eye localization based on intensity information. Experimental results show that a correct eye detection rate of 98.9% can be achieved on 2408 FERET images with variations in lighting condition and facial expressions.

• Journal of the Korean housing association
• /
• v.17 no.1
• /
• pp.59-66
• /
• 2006

The purpose of this study was analyzing the Transforming Characteristics of the Entrance of Privately-built Apartment housing in Daegu from the 1970s to the 2000s. First of all, this study made an investigation into the general situation of Privately-built Apartment housing and the general idea of the Entrance. Through a field study, This study was analyzing change of an era of entrance of Apartment housing till quite recently existing in Daegu. The results are as the body III follows. Results of the research through change of an era is as follows. The change tendency is not to be big before 2003, but It has under gone change after 2003. Studies show that It is the care for the old and the weak, to take interest in natural lighting, to be going to change from passing the time of space to staying space and more space, to show interest in the preservation of public peace and design. So, The Entrance of Apartment housing has a bias towards more elegant. This research look forward to having an intention of furnishing preliminary data for a residence environment of high quality.