• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.116-124
• /
• 2012

In this paper, we propose an efficient lighting control system design for AVR based LSDM control. This paper, an efficient lighting control system design for LSDM control be design divided as the signal control part for I/O data bus and the timer/counter part for clock signal control according to operating conditions. LSDM control logic be optimization to PORTx and DDRx register by specifying the logical value of each bit for effective control signal processing. And, the LSDM control signal by lighting control program execution of ATmega128 be designed to be LSDM lighting control by control logic operating. In this paper, a proposed lighting control system were measured to power loss rate to proved the power loss reduction about lighting status of LSDM control logic by download the lighting control program to system through serial from host PC. As a measurement result, a proposed lighting control system than the existing lighting control system were proved to be effective to the overall power consumption reduction.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.207-213
• /
• 2017

The Adaptive Front-lighting System (AFS) is a part of the active safety system, providing optimized vision to the driver during night time and other poor-sight conditions of the road by automatic adaptation of lighting to environmental and traffic conditions. Basically, an AFS provides four different modes of the passing beam as designated in an United Nations Economic Commission for Europe regulation (ECE324-R123): neutral state or country light (Class C), urban light (Class V), highway light (Class E), and adverse weather light (Class W). In this paper, we first present an optics design for an AFS system capable of producing the Class C/V/E/W patterns requiring only on/off modulation of multi-array LEDs with no need for any additional mechanical components. The AFS optics consists of two separated modules, cutoff and spread; the cutoff module lights a narrow central area with high luminous intensity, satisfying the cutoff regulation, and the spread module forms a wide spread beam of low luminous intensity. Each module consists of two major parts; the first converts a discretely positioned LED array into a full-filled area emitting light source plane, and the second projects the light source plane to a 25 m away target plane. With the combination of these two optics modules, the four beam patterns are formed by simple on/off modulation of multi-array LEDs. Then we report the development of a prototype that was demonstrated to provide the four beam patterns.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.9-18
• /
• 2010

This research surveys actual conditions in order to examine the lighting environments of the elderly's residential 50 households. The results is as following. First, The elderly indicated that they felt the living room and the kitchen are usual degree, dark only in bedrooms and rest rooms of brightness. And about satisfactory degree of residential illumination is being above of usual Satisfaction. Second, Problems of lighting environments of elderly's houses were brightness and management, when lighting environmental reconstruct, considered brightness and equipment superannuation, and they want the focus on brightness in the reconstruction. Third. Operating method of lighting was used almost overall lighting in bedroom and bathroom, overall lighting and part lighting are used together in kitchens. The living room has a lot of cases which uses only a general illumination, but the cases which overall lighting and part lighting are used together has occupied 40[%]. Fourth, An average Illuminance of the bedroom is 104.17[lx], an average unifonnity ratio is 60.22[%]. The livingroom's average is 116.15[lx], 51.48[%]. The sink's average is 236.40[lx], the table average is 160.73[lx] in the kitchen. The washstand's average is 109.81[lx], the chamber's average pot is 74.33[lx] in the bathroom. These results are generally darker than the standard.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.429-436
• /
• 2013

In this study, we researched a pendant-type aspherical optical system, which could be applied to street lighting and security lighting in Europe. The goal of this research was eco-friendly artificial lighting that could be used for the one-to-one replacement of ordinary lighting. LED lighting was miniaturized by using one COB LED Module and one aspherical optical system, which could control the luminosity of the LED. Through the aspherical optical system, the light distribution angle could be controlled in a range of $140^{\circ}$ for the X-axis and $40^{\circ}$ for the Y-axis. This means that this optical system is appropriate for catenary-type lighting, which is widely used in Europe on both narrow and broad roads. The performance was determined using a lighting simulation program. This lighting system simulation showed that road rates M4 and M5 could be satisfied, with the condition of a 13-m height and 50-m distance (U0 and TI). The simulation program estimated that light pollution, which disturbs sleep, could beeliminated in the European streetlight case. Determining methods for the light distribution control, performance, and optimal lighting setup conditions is very important to prevent light pollution. Moreover, the initial step of developing the lighting system design and post management will require an effort with much analysis.

• Korean Journal of Remote Sensing
• /
• v.34 no.4
• /
• pp.649-659
• /
• 2018

The aim of this study is to develop a protocol for obtaining spectral signals that are robust to varying lighting conditions, which are often found in the Polar regions, for creating a spectral library specific to those regions. Because hyperspectral image (HSI)-derived spectra are collected on the same scale as images, they can be directly associated with image data. However, it is challenging to find precise and robust spectra that can be used for a spectral library from images taken under different lighting conditions. Hence, this study proposes a new radiometric calibration protocol that incorporates radiometric targets with a traditional vicarious calibration approach to solve issues in image-based spectrum measurements. HSIs obtained by the proposed method under different illumination levels are visually uniform and do not include any artifacts such as stripes or random noise. The extracted spectra capture spectral characteristics such as reflectance curve shapes and absorption features better than those that have not been calibrated. The results are also validated quantitatively. The calibrated spectra are shown to be very robust to varying lighting conditions and hence are suitable for a spectral library specific to the Polar regions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.1-8
• /
• 2010

In this study, students in twenties of fill people who has been living in Daegu were surveyed to landscape lighting on Dongdaeguro to investigate the awareness of residents. As a result, the factor that most influenced to the night landscape lighting is the 69.2[%] to the highest and the image of Daegu city is education and culture were the highest. Need to focus on the Daegu landscape design is 'nature harmony' is the highest. The greatest and the poorest effect in the night scenery is 'lighting' and lighting conditions and brightness were negative.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.3
• /
• pp.91-96
• /
• 2014

Modern electronic circuits are becoming more vulnerable to damage by surges, and it is required to improve the impulse withstand voltage performance of electrical and electronic equipment. This paper presents the impulse withstand voltage performance of lighting equipment connected to power lines, and the impulse withstand voltage tests for fluorescent lamp, LED lamp and halogen lamp were carried out according to the reference standards under normal service conditions. To conduct performance tests against lightning surge, a combination wave ($1.2/50{\mu}s$ voltage - $8/20{\mu}s$ current) was employed. The test surge was applied between lines or between line and ground of the specimen to be measured. The test surge was applied synchronized at the peak value of the positive and negative AC voltage waves. As a consequence, some specimens satisfied the impulse withstand voltage test criteria, but lighting equipment such as 36W fluorescent lamps, 5W and 5.5W LED lamps and 50W halogen lamp were damaged at the test voltage levels between power lines. It is needed to improve the qualities of lighting equipment to satisfy EMC immunity requirements of equipment for general lighting purposes.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.3
• /
• pp.1-6
• /
• 2011

To compare the lighting environment of kitchen and bathrooms in the apartments in China and Korea, this research conducted a study of the current status, targeting 68 households in China and 79 households in Korea. The results are as follows. First, the Korean kitchen space is a little bigger than China's, but the height of the sink and table show no difference. China does not use local lighting in the kitchen. And Korea 40.2[%], China 65.6[%] is sink's KS based was below. In the case of the dining table, KS criteria satisfy both Korean and Chinese standards. 20[%] appear to be very feeble; urgent improvements are required. Secondly, regarding the size of the bathroom, Korea and China show similar sizes; the average height of the vanities and toilet is higher in Korea than in China by 2[cm]. China does not use local lighting in the bathroom. The levels of illumination were measured; lighting is higher in China's bathrooms compared to Korea's.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.181-187
• /
• 2015

In this study, an LED emotional lighting algorithm optimized to the situation was implemented using fuzzy inference for users in exercise and resting situations in indoor environment. The fuzzy theory was used instead of the conventional simple color temperature control in order to control the colors and color temperatures of LED light sources in line with user environment under complex conditions. An LED emotional lighting system based on fuzzy theory was designed through a combination of colors according to the color and temperature of emotional language based on the user behavior. As a result, the color and color temperature can give a good effect on user's emotions for an emotional lighting that is effective for resting and exercise.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.25-33
• /
• 2015

LED lightings combined with IT technology can provide variable illumination environments that can be controlled by users according to their emotional need and preferences. This is one of the most beneficial functions compared with conventional lightings offering only fixed color and brightness. There is however lack of analysis data for creating practical lighting solutions satisfying user preferences in a wide range of applications from residential to commercial places. To materialize the technical advantages of user-controllable LED lightings, more observation data are required in various situations. Therefore, dissimilar emotional needs are determined in the present study for compartmental office spaces (staff lounge room, meeting room and desk job place) through subjective experiments by 45 observers. The optimum lighting conditions (CCT and illuminance) are finally obtained using Response Surface Method and relevant prediction functions are also deduced. The final outcome can be applied for making user-preferred office illumination products.