• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.12
• /
• pp.630-637
• /
• 2002

This paper proposed a new diffusion model considering DSM rebate program's support conditions. The proposed method used some aspects of the rebate program such as support qualifications, annual support volume, and support level per appliance as following : The support qualifications were limited as the consumer which can get the rebate program's benefit, the annual support volume was constrained as the fixing budget and the support level per appliance was considered by high-efficient appliance actuality price. This paper also proposed a new method that used neural network as its parameter estimation moth[,4 for the diffusion model. The diffusion model and its parameter estimation method are expected to be able to analyze the diffusion characteristics of high-efficient appliance through the rebate program and the effects of rebate program's support conditions. Also, these will be able to evaluate the impacts and to analyze the cost-effectiveness of Energy Efficiency Demand-Side Management(EEDSM) resources. The case study is performed on the high-efficient lighting appliance rebate program of Korea by using the suggested diffusion model and estimation method and thus verified its validity.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.4
• /
• pp.448-454
• /
• 2015

In this paper, the band structural design that is typically in a line was arranged in a ring shape, so as to configure the high power LED lighting in such a way as to form a concentrated light distribution angle of less than 15 degrees. The parabolic aluminized reflector PAR38 that facilitates design using area and the area of the optical system to the same extent, applied a multiple light-source condenser lens optical system for the control of integration. The LED used here implemented a single linear light source using ans LED module with ans LED, flip-chip chip-scale package. The optical system was designed based on the energy star standard.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.114-119
• /
• 2011

There is a limit to technology of improving luminous intensity uniformity and glare, known as a weakness of existing LED lamp. Because of Using many LED, LED lamp not only waste energy but have bad effect on efficiency. Our goal is to develop security lights solution which is contented with suitable area in KS(Korean Industrial Standards) and to remove glare by combining asphere in optical system with different concept. To improve luminous intensity uniformity, a reflect mirror system was used after an aspheric optical system design for this study. We made a mirror and measured it after analysing luminance changes depend on aspheric shapes with simulation program to see if aspheric shapes effect luminance distribution. We made progress to find problems and improve them by comparing measured data and analysed data. This result of the study will contribute to industry of LED lighting through developing solution of emotional illumination of LED security lights by knowing the importance of reflectivity with this study and improving luminous intensity uniformity with solving the problem.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.221-227
• /
• 2008

This paper is to show the designing for LED lights driver unit. The main purpose of driver designing is high electrical efficient performance and intelligent control LED driver. Nowadays, a lightning system with some of charactestics such as an environmentally friendly purposes with a possible reduction of electric power consumptions. We constitute a intelligent contron LED control system that helps to save an electric energy, and a communication system to control the system. This LED driver can be used for intelligent light control. This product expects to improve the light control by dimming instead of interlace on/off light control that increases the social cost such as car accidents and etc.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.3
• /
• pp.194-199
• /
• 2001

Chlorella kessleri cultivated in artificial wastewater using diurnal illumination of 12h light/12h dark (L/D) cycles. The inoculum density was 10(sup)5 cells/mL and the irradiance in light cycle was 45$\mu$mol㎡s(sup)-1 at the culture surface. As a control culture, another set of flasks was cultivated under continuous illumination. Regardless of the illumination scheme, the total organic carbon (TOC) and chemical oxygen demand (COD) was reduced below 20% of the initial concentration within a day. However, cell concentration under the L/D lighting scheme was lower tan that under the continuous illuminating scheme. Thus the specific removal rate of organic carbon under L/D cycles was higher than that under continuous illumination. This result suggested that C. kessleri grew chemoorganotrophically in the dark periods. After 3 days, nitrate was reduced to 136.5 and 154.1mg NO$_3$-N/L from 168.1mg NO$_3$-N/L under continuous illumination and under diurnal cycles, respectively. These results indicate nitrate removal efficiency under continuous light was better than that under diurnal cycles. High-density algal cultures using optimized photobioreactors with diurnal cycles will save energy and improve organic carbon sources removal.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.5
• /
• pp.52-56
• /
• 1996

Fluorescent lamps are widely accepted to energy efficient commercial lighting applications. In designing a fluorescent lamp system, a ballast design heavily relies on the characteristic of a fluorescent lamp under consideration. Especially, at startup time, the transient characteristic of a fluorescent lamp puts much tighter specification of a design. In this paper, based on the transient characteristic at the startup time, a transient behavioral model of a fluorescent lamp is presented with an equivalent circuit. The model is applicable to the wide range of fluorescent lamps provided by different manufacturers. The experimental results are compared with the results provided by PSPICE simulation. The result shows the model is effective In practice. As a result, we could identify more accurate startup constraints to decide the design of either an electro mechanical or an electronic ballast.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.5
• /
• pp.8-14
• /
• 2003

The daylight responsive dimming system, which uses daylight and automatically controls the light output of electric lighting according to the amount of 3.vailable daylight, is an energy saving system Successful performance relies on how photosensor signal can precisely represent workplace illuminance. However, it is not accurately identified due to the dynamic nature of the sun and the sky changed with respect to different seasons or time. The purpose of this research is to identify the correlation between workplace illuminance and photosensor signals, and propose an optimal location and spatial characteristics of the photosensor through experiments, which minimizes the above impacts and improve system performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.438-438
• /
• 2011

White light-emitting diodes (LEDs), the so-called next-generation solid-state lighting, offer benefits in terms of reliability, energy-saving, maintenance, safety, lead-free, and eco-friendly. Recently, rare-earth-doped oxynitride or nitride compounds have attracted a great deal of interest as a photoluminescent material because of their unique luminescent property, especially for white LEDs applications. Ce doped ${\beta}$-SiAlON has been studied as a wavelength conversion phosphor in white LEDs thanks to its high absorption rates, high quantum efficiency, and excellent thermal stability. Previously researches were not enough to understand the detail mechanism and characteristics of ${\beta}$-SiALON. The bandgap structures and electronic structures were not exact due to limitation of calculation methods. In this study, to elucidate the Ce doping effect on the SiAlON system, accurate band structures and electronic structure of the Ce doped ${\beta}$-SiAlON was intensively investigated using density functional theory calculations. In order to get a better description of the band gaps, MBJLDA method were used. We have found a single Ce atom site in ${\beta}$-SiAlON super cell. Furthermore, the density of state, band structure and lattice constant were intensively investigated.

• The Korean Journal of Food And Nutrition
• /
• v.4 no.1
• /
• pp.81-90
• /
• 1991

This study was conducted a comprehensive survey of 39 elementary schools operating school lunch program in Seoul area. The purpose of this study was to investigate the realities of school lunch program. This method of the research was based on the interview survey with dietitian working at each school with prepared questionnaire. The survey was conducted for 16 days from Dec. 5 to Dec. 20., 1990. The results of this study were as follows ; (1) The average numbers of children supplied with food were 1,244 for each school. It was about 44.3Bb of the students enrolled in the school. The average feeding cost was 738 won per a child for a day. (2) Only one school was operating nutritional education as a regular educational program, and others were operating nutritional education off and on. (3) All nutrient intake except energy were higher than the RDA for school lunch program. (4) The ratio of animal food was 46.2%, and that of vegetable food was 53.8%. (5) The ratio of schools without sterilizer cabinet came to 56.4%, and that of schools without warmer was 97.4%. (6) The facilities for drainage, lighting, ventilation, anti-rat of a cookery were comparatively good.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.04a
• /
• pp.57-65
• /
• 2001

Economical consumption of energy, longer life of lamps, higher lighting comfort and new aesthetic of illumination is subject of numerous research and development works. The halogen lamps are an example of positive solution some of above mentioned problems. The electronic transformers are more frequent used for their supply. In comparison with conventional transformers they have less weight, less volume and 60% less power tosses. Their advantages are particular visible, when the hybrid technique is applied. The paper presents the results of engineering research and development works carried out ill Private Institute of Electronic Engineering, in R. & D. Center for Hybrid Microelectronics and Resistors and in Technical School of Communications in Krakow, in the field of the design and exploitation tests of hybrid converters 220V AC /12V DC (electronic transformers) and electronic ballasts destined for the supply of halogen lamps 20W to 150W and fluorescent lamps respectively. To perform the converters, thick film technology and surface mount technology were used. For the protection of converter electronic circuit the thick film temperature sensor and transistors were applied. Moreover the paper presents the base application circuits of elaborated converters, their technical parameters and exploitation results. The development perspectives of hybrid domain of hybrid circuits are also discussed.