This paper reexamines ideas about linguistic relativity in the light of new interest in the theoretical climate. The original idea is based on the incommensurability of the semantic structures of different languages. On this view, language, thought, culture are deeply interconnected, so that each language might be associated with it a distinctive world view. Throughout this work I utilize the historico-epistemological standpoint to dissect the conceptual structure of this principle. In the introduction I will of for a justification of choice of the theme. Section 1 will address some essential definition of the linguistic principle and insist on the necessity to elaborate a typological spectrum of relativism and universalism. In the second section some important landmarks of linguistic relativity were marked from Plato to Humboldt via Condillac and Herder. 1 will subdivide the relativity hypothesis into 3 theses which are interlated. In the final section the epistemological structure of the linguistic principle will be analysed in some detail by providing my exposition of Sapir-Whorf hypothesis. By way of conclusion I will present the works of Wierzbicka who demonstrated the lexicons of different languages suggest different conceptual universes. By rejecting analytical tools derived from the English language she proposed instead a natural semantic metalanguage based on lexical universals, which is made up of universal semantic primitives. In this paper we attempted to construct a general problematics of linguistic relativity, focolizing on the Sapir-Whorf hypothesis. We devided this very problematic question into its ontological and epistemological dimensions. In particular the ambivalance of Whorf's relativity is discussed in some detail. Also, an archeological survey of this subtle question on the relation between language, thinking and culture was provided. (from Aristotle to Humboldt, via Condillac and Nitzche). In conclusion this investigation underlines the necessity of preparing the cultural linguistics to enlarge the scope of contempory linguistics.
Titanium alloy has been in the spotlight as a core material in high-tech industries that require high strength and light weight because it has excellent strength and corrosion resistance and strength is higher than that of steel. Therefore, in various industries, existing steel products are intended to be replaced with titanium alloys. Titanium alloys can cause cutting tool breakage during cutting, and heat generated during cutting does not dissipate, accumulates in tools and workpieces, resulting in large wear and tear on thin workpieces. In addition, since titanium alloy is a metal with high chemical activity, the wear of the tool becomes more severe when the cutting speed is high, so machining of titanium bolt through cutting is very disadvantageous in terms of productivity. Therefore, the production of bolts using titanium alloys is being produced through a forging process to improve productivity and product quality. In this paper, hot forging molding analysis was performed on bolts used for fastening automobile parts using Ti-6Al-4V alloy, which is the most commonly used titanium alloy.
Daoud, Sahar Aly;Esmail, Reham Shehab El Nemr;Hareedy, Amal Ahmed;Khalil, Abdullah
Asian Pacific Journal of Cancer Prevention
/
제16권8호
/
pp.3307-3312
/
2015
The papillary patterned lesion of thyroid may be challenging with many diagnostic pitfalls. Tumor stroma plays an important part in the determination of the tumor phenotype. CD34 is thought to be involved in the modulation of cell adhesion and signal transduction as CD34(+) fibrocytes are potent antigen-presenting cells. Smooth muscle actin (SMA) positivity could be diagnostic for fibroblast activation during tumorigenesis. We aimed to examine the expression of CD34 and alphaSMA in the stroma of papillary thyroid hyperplasia, papillary thyroid carcinoma and papillary tumors of uncertain malignant potential in order to elucidate their possible differential distribution and roles. A total number of 54 cases with papillary thyroid lesions were studied by routine H&E staining, CD34 and ASMA immunostaining. ASMA was not expressed in benign papillary hyperplastic lesions while it was expressed in papillary carcinoma, indicating that tumors have modulated stroma. Although the stroma was not well developed in papillary lesions with equivocal features of uncertain potentiality, CD34 was notable in such cases with higher incidence in malignant cases. So ASMA as well as CD34 could predict neoplastic behavior, pointing to the importance of the stromal role. Differences between groups suggest that the presence of CD34 + stromal cells is an early event in carcinogensis and is associated with neoplasia, however ASMA+ cells are more likely to be associated with malignant behavior and metastatic potential adding additional tools to the light microscopic picture helping in diagnosis of problematic cases with H&E.
이 연구에서는 기존의 클레이 애니메이션 제작 공정이 가지는 문제점을 개선하기 위해 3D 컴퓨터그래픽을 도입한 새로운 제작 공정을 제안한다. 그 핵심은 기존 공정을 바탕으로 하되 대단히 노동집약적인 캐릭터 제작 과정을, 3D 컴퓨터그래픽에 의한 디지털 캐릭터로 대체하는 것이다. 클레이 애니메이션에 등장하는 캐릭터를 3D 컴퓨터그래픽으로 구현하기 위해 클레이 캐릭터와 동일한 색상과 종류의 유성찰흙을 사용하여 폴리곤 모델링 캐릭터의 UVW 좌표 값에 맞춘 디퓨즈 맵과 디스플레이스먼트 맵을 제작하였다. 또한 파노라마 HDRI 자동 촬영 시스템을 개발하여 미니어처 세트 촬영 환경의 조명 정보를 초고해상도의 파노라마 HDRI 형식으로 제작, 이를 디지털 라이팅 소스로 사용하였다. 이 과정을 통해 대단히 사실적인 결과물을 얻음과 동시에 숙달된 작업자의 노하우에만 의존하던 스톱모션 제작 공정을 공학적 접근에 의한 자동화된 방식으로 개선할 수 있었다.
In the thin film alloy formation of the transition metals ion-beam-mixing technique forms a metastable structure which cannot be found in the arc-melted metal alloys. Sppecifically it is well known that the studies about the electronic structure of ion-beam-mixed alloys pprovide the useful information in understanding the metastable structures in the metal alloy. We studied the electronic change in the ion-beam-mixed ppt-Ct alloys by XppS and XANES. These analysis tools pprovide us information about the charge transfer in the valence band of intermetallic bonding. The multi-layered films were depposited on the SiO2 substrate by the sequential electron beam evapporation at a ppressure of less than 5$\times$10-7 Torr. These compprise of 4 ppairs of ppt and Cu layers where thicknesses of each layer were varied in order to change the alloy compposition. Ion-beam-mixing pprocess was carried out with 80 keV Ae+ ions with a dose of $1.5\times$ 1016 Ar+/cm2 at room tempperature. The core and valence level energy shift in these system were investigated by x-ray pphotoelectron sppectroscoppy(XppS) pphotoelectrons were excited by monochromatized Al K a(1486.6 eV) The ppass energy of the hemisppherical analyzer was 23.5 eV. Core-level binding energies were calibrated with the Fermi level edge. ppt L3-edge and Cu K-edge XANES sppectra were measured with the flourescence mode detector at the 3C1 beam line of the ppLS (ppohang light source). By using the change of White line(WL) area of the each metal sites and the core level shift we can obtain the information about the electrons pparticippating in the intermetallic bonding of the ion-beam-mixed alloys.
Because of high population diversity in soil microbial communities, it is difficult to accurately assess the capability of biodegradation of toxicant by microbes in soil and sediment. Identifying biodegradative microorganisms is an important step in designing and analyzing soil bioremediation. To remove non-important noise information, it is necessary to selectively enrich genomes of biodegradative microorganisms fromnon-biodegradative populations. For this purpose, a stable isotope probing (SIP) technique was applied in selectively harvesting the genomes of biphenyl-utilizing bacteria from soil microbial communities. Since many biphenyl-using microorganisms are responsible for aerobic PCB degradation In soil and sediments, biphenyl-utilizing bacteria were chosen as the target organisms. In soil microcosms, 13C-biphenyl was added as a selective carbon source for biphenyl users, According to $13C-CO_2$ analysis by GC-MS, 13C-biphenyl mineralization was detected after a 7-day of incubation. The heavy portion of DNA(13C-DNA) was separated from the light portion of DNA (12C-DNA) using equilibrium density gradient ultracentrifuge. Bacterial community structure in the 13C-DNAsample was analyzed by t-RFLP (terminal restriction fragment length polymorphism) method. The t-RFLP result demonstates that the use of SIP efficiently and selectively enriched the genomes of biphenyl degrading bacteria from non-degradative microbes. Furthermore, the bacterial diversity of biphenyl degrading populations was small enough for environmental genomes tools (metagenomics and DNA microarrays) to be used to detect functional (biphenyl degradation) genes from soil microbial communities, which may provide a significant progress in assessing microbial capability of PCB bioremediation in soil and groundwater.
A study of new materials that are light-weight, high in strength has become vital to the machinery of auto industries. But then, there are a lot of problems with developing such materials that require expensive tools, and a great deal of time and effort. Therefore, the improvement of fatigue strength and fatigue life are mainly focused on by adopting residual stress. And Influence of corrosive condition for corrosion fatigue crack was investigated, after immersing in 3.5%NaCl, $10%HNO_3$+3.5%HF, $6%FeCl_3$. The immersion period was performed for 365days. The compressive residual stress was imposed on the surface according to each shot velocity based on shot peening, which is the method of improving fatigue life and strength. Fatigue life shows more improvement in the shot peened material than in the un peened material in corrosion conditions. The threshold stress intensity factor range was decreased in corrosion environments over ambient. Compressive residual stress of surface on the Shot-peen processed operate resistance force of fatigue crack propagation. The fatigue crack growth rate of the Shot-peened material was lower than that of the un peened material. Also m, fatigue crack growth exponent and number of cycle of the shot peened material was higher than that of the un peened material. That is concluded from effect of da/dN.
This study was attempted to investigate the current status of industry food service management in Chonbuk province. The survey for the analysis was conducted through the questionaires to dietitian. The following results are to be noted. 1. Only one dietitian was employed regardless of feeding numbers and feeding times, and the average number of cooks comes to 5∼6 persons. Among 51 food service places for the study, 84.3% provided more than two meals a day. Feeding number were 200∼1000 people per one meal (64.7%) and feeding cost amounts to 700∼1000 won per meal per one person. 2. The food preferences and budget were primary considerations in menu planning. The type of menus was a non-selective menu with a seven-day cycle (83.7%). Most of dietitian (94.1%) had control of food purchasing, receiving and checking procedure and prefered placing orders by phone (94.5%) through the purveyors (86.4%). 3. In many food service places (70.5%), the mass food preparation was controlled of cooking method and standardized recipes were not undertaken by management Also, the food quality control such as flavor, texture, appearance and temperature was not fully established in food service system. 4. They used the method of manual dish washing operations (88%) and about 71.4% of them are dependent on boiling method of ultrabiolet light for disinfection of kitchen utensils. 5. The performance rates of dietitian management responsibility showed as nutritional management 100%, working management 72.4%, sanitary management 85.6%, personnel management 64.5% and nutrition education 40.7%, but they did not perform the objective and systematic their own responsibility as specialized dietitian because only few dietitian used basic check list and management tools. In addition, dietitian (21.6%) worked beyond their field. In the result, only 54.9% dietitian have satisfied their own occupation and most of them emphasized on practical working in educational curriculums.
Nicholas, David;Clark, David;Jamali, Hamid R.;Watkinson, Anthony
International Journal of Knowledge Content Development & Technology
/
제4권1호
/
pp.23-37
/
2014
The Trust and Authority in Scholarly Communications in the Light of the Digital Transition research project1) was a study which investigated the behaviours and attitudes of academic researchers as producers and consumers of scholarly information resources in respect to how they determine authority and trustworthiness. The research questions for the study arose out of CIBER's studies of the virtual scholar. This paper focuses on elements of this study, mainly an analysis of a scholarly publisher's usage logs, which was undertaken at the start of the project in order to build an evidence base, which would help calibrate the main methodological tools used by the project: interviews and questionnaire. The specific purpose of the log study was to identify and assess the digital usage behaviours that potentially raise trustworthiness and authority questions. Results from the self-report part of the study were additionally used to explain the logs. The main findings were that: 1) logs provide a good indicator of use and information seeking behaviour, albeit in respect to just a part of the information seeking journey; 2) the 'lite' form of information seeking behaviour observed in the logs is a sign of users trying to make their mind up in the face of a tsunami of information as to what is relevant and to be trusted; 3) Google and Google Scholar are the discovery platforms of choice for academic researchers, which partly points to the fact that they are influenced in what they use and read by ease of access; 4) usage is not a suitable proxy for quality. The paper also provides contextual data from CIBER's previous studies.
During the course of a severe accident in a light water nuclear reactor, large amounts of hydrogen can be generated and released into the containment during reactor core degradation. Additional burnable gases [hydrogen ($H_2$) and carbon monoxide (CO)] may be released into the containment in the corium/concrete interaction. This could subsequently raise a combustion hazard. As the Fukushima accidents revealed, hydrogen combustion can cause high pressure spikes that could challenge the reactor buildings and lead to failure of the surrounding buildings. To prevent the gas explosion hazard, most mitigation strategies adopted by European countries are based on the implementation of passive autocatalytic recombiners (PARs). Studies of representative accident sequences indicate that, despite the installation of PARs, it is difficult to prevent at all times and locations, the formation of a combustible mixture that potentially leads to local flame acceleration. Complementary research and development (R&D) projects were recently launched to understand better the phenomena associated with the combustion hazard and to address the issues highlighted after the Fukushima Daiichi events such as explosion hazard in the venting system and the potential flammable mixture migration into spaces beyond the primary containment. The expected results will be used to improve the modeling tools and methodology for hydrogen risk assessment and severe accident management guidelines. The present paper aims to present the methodology adopted by Institut de Radioprotection et de $S{\hat{u}}ret{\acute{e}}$$Nucl{\acute{e}}aire$ to assess hydrogen risk in nuclear power plants, in particular French nuclear power plants, the open issues, and the ongoing R&D programs related to hydrogen distribution, mitigation, and combustion.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.