• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.588-593
• /
• 2014

Current crowding problem can worsen the internal quantum efficiency and the negative-voltage ESD of InGaN-based LEDs. In this paper, by using photon emission microscope and thermal emission microscope measurement, we confirmed that the electric field and the current of the InGaN-based LED sample are crowded in specific regions where the distance between p-type metal contact and n-type metal contact is shorter than other regions. To improve this crowding problem of electric field and current, modified metal contact geometry having uniform distance between the two contacts is proposed and verified by a numerical simulation. It is confirmed that the proposed structure shows better current spreading, resulting in higher internal quantum efficiency and reduced reverse leakage current.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.192.2-192.2
• /
• 2015

본 논문에서는 사파이어 기판 표면에 레이저 처리를 통해 격자 구조(레이저 격자 구조)를 제작하고 InGaN/GaN 발광다이오드(Light-Emitting Diodes, LED) 박막을 성장 한 시료에서 Bowing 특성 변화를 논의한다. 그리고 Bowing 정도에 따른 InGaN/GaN LED의 광학 및 전기적 특성을 Photoluminescence (PL)와 Electroluminescence (EL) Mapping 법을 이용하여 상호 비교 분석하였다. 2-인치 사파이어 기판 상에 레이저 격자 구조의 간격은 1 mm (GS1-LED), 2 mm (GS2-LED), 3 mm (GS3-LED) 로 제작하였으며, 격자 구조가 없는 LED를 기준 시료(C-LED)로 사용하였다. GS1-LED, GS2-LED, GS3-LED의 Bowing 정도는 C-LED 대비 각각 8%, 7.6%, 6.4% 감소하였다. PL Mapping 결과, GS-LED의 발광 파장의 분포 균일도가 C-LED 보다 개선되는 것을 확인하였고, 파장이 C-LED 대비 단파장으로 이동하였다. 또한, GS-LED시료의 PL 강도는 C-LED보다 증가하였고, 특히 GS2-LED의 PL 강도는 C-LED 대비 6.9% 증가 하였다. EL mapping 결과, GS-LED 발광 파장의 분포 균일도는 PL 결과와 유사하게 측정되었으며, 2인치 기판 전체 면적에 대한 GS-LED의 주요 동작전압 및 출력 전력 수율이 C-LED대비 현저히 개선되었다. 사파이어 기판 표면에 제작한 레이저 격자 구조에 따른 InGaN/GaN LED의 광학적, 전기적 특성을 Bowing의 개선과 응력 완화 현상으로 논의 할 예정이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권1호
• /
• pp.114-121
• /
• 2015

In conventional LEDs, a mesa-structure is usually used and it causes the current to be overcrowded in a specific region. We propose a novel structure of GaN-based LED to overcome this problem. In order to distribute the current in an active region, a spreading pad is inserted at the p-type region in the GaN based LED device. The inserted spreading pad helps the current flow because it is more conductive than the p-type GaN layer. By performing electrical and optical simulations, the effects of the spreading pad insertion are confirmed. The results of electrical simulation show that the current spreads more uniformly and more radiative recombination is produced as well. Moreover, from the optical simulation, it is revealed that the ITO is less absorptive material than p-GaN if the condition of specific wavelength sources is satisfied. Considering all of the results, we can conclude that the luminescent power is enhanced by the spreading pad.

• 한국광학회지
• /
• 제13권2호
• /
• pp.128-133
• /
• 2002

최근 주목을 받고 있는 고분자 발광다이오드의 개발에 있어서, 발광고분자의 Photoluminescence(PL)와 Electroluminescence (EL) 양자효율 측정은 소자의 성능개선 연구 등에 있어서 가장 핵심적인 요소 중 하나로 여겨진다. 이러한 이유에서 본 연구에서는 잘 알려진 발광고분자인 Poly(2-methoxy-5(-(2-ethyl-hexyloxy)- 1,4-phenylenevinylene) (MEH- PPV)를 이용하여 시편을 제작하고, 적분구 측정법을 이용하여 이의 P교라 EL 양자효율을 구하였다. 그 결과 본 연구진이 개발한 MEH-PPV의 PL 양자효율은 8$\pm$2%로 측정되었는데, 이는 세계적으로 알려져 있는 ～9%의 결과에 거의 접근함을 보였다. 한편, 이 물질을 이용하여 고분자 발광다이오드를 제작한 결과, 이의 EL양자효율은 0.02 1m/W로 측정되었다. 본 연구를 통하여 확립된 발광고분자의 양자효율 측정법은 국내의 유기발광소자 연구에 큰 기여를 하리라 기대된다.

• 대한전자공학회논문지TE
• /
• 제37권5호
• /
• pp.1-6
• /
• 2000

고순도 적색 발광을 얻기 위하여 진공증착법으로 스쿠아릴늄 색소(Sq)를 첨부한 알루미늄퀴롤린착체 (Alq3)를 발광층으로 사용하는 유기발광소자를 제작하였으며, 소자의 발광특성 및 전기적 특성을 조사하였다. 스쿠아릴늄의 발광 피이크 파장은 670㎚이고 발광강도가 절반이 되는 파장 폭은 30㎚이었다. 스쿠아릴늄의 적색발광은 도핑 농도가 15㏖% 이상에서 고순도 적색 발광특성이 관측되었지만, EL효율은 10/sup -2/W 이하이고 휘도는 0.21cd/㎡, 0.1cd/㎡ 정도로 매우 낮았다. 스쿠아릴늄 분자가 Alq3 분자 내에 트랩 된다고 하더라도 도핑농도가 5㏖% 이상인 경우에 캐리어 드래프트로 작용한다.

• 한국전기전자재료학회논문지
• /
• 제20권3호
• /
• pp.202-206
• /
• 2007

ZnO is a promising material to make high efficient ultraviolet(UV) or blue light emitting diodes(LEDs) because of its large binding energy and energy bandgap. In this study, we prepared ZnO thin films with p-type conductivity on silicon(100) substrates by RF magnetron sputtering in the mixture of $N_2$ and $O_2$. The process was accompanied by low pressure in-situ annealing in $O_2$ at $600^{\circ}C$ and $800^{\circ}C$ respectively. Hall effect in Van der Pauw configuration showed that the N-doped ZnO film annealed at $800^{\circ}C$ has p-type conductivity. Photoluminescence(PL) spectrum of the film annealed at $800^{\circ}C$ showed UV emission related to exciton and bound to donor-acceptor pair(DAP) as well as visible emission related to many intrinsic defects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1270-1271
• /
• 2008

Effects of thin ZnO/Mg interlayers on electrical and optical properties between p-GaN and ITO were characterized for its application to GaN-LEDs. The ZnO and Mg layers were deposited to have various thicknesses (1${\sim}$6nm for ZnO and 1${\sim}$2nm for Mg) by sputtering. After RTA process, the atomic migration between Mg and ZnO and the formation of Ga vacancy were observed from SIMS depth profile, resulting in the increase of hole concentration and the reduction of band bending at the surface region of p-GaN. The sample using ZnO(2nm)/Mg(2nm) interlayer produced the lowest contact resistance with SBH(Schottky barrier height) of 0.576 eV and the transmittance higher than 83% at a wavelength of 460nm when annealed at 500$^{\circ}C$ for 3min in air ambient.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.253-253
• /
• 2011

ZnTe semiconductor is very attractive a material for optoelectronic devices in the visible green spectral region because of it has direct bandgap of 2.26 eV. The prototypes of ZnTe light emitting diodes (LEDs) have been reported [1], showing that their green emission peak closely matches the most sensitive region of the human eye. The optoelectronic properties of ZnTe:O film allow to expect a large optical gain in the intermediate emission band, which emission band lies about 0.4-0.6 eV below the conduction band of ZnTe [2]. So, the ZnTe system is useful for the production of high-efficiency multi-junction solar cells [2,3]. In this work, the ZnTe:O thin films were deposited on Al2O3 substrates by using the radio frequency magnetron sputtering system. Three sets of samples were prepared using argon and oxygen as the sputtering gas. The deposition chamber was pre-pumped down to a base pressure of 10-7 Torr before introducing gas. The deposition pressure was fixed at 10-3 Torr throughout this work. During the ZnTe deposition, the substrate temperature was 300 oC. The optical properties were also investigated by using the ultraviolte-visible (UV-Vis) spectrophotometer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.191-191
• /
• 2012

InP quantum dot (QD) - organosilicon nanocomposites were synthesized and their photoluminescence quenching was mainly investigated because of their applicability to white LEDs (light emitting diodes). The as-synthesized InP QDs which were capped with myristic acid (MA) were incompatible with typical silicone encapsulants. Post ligand exchange the MA with a new ligand, 3-aminopropyldimethylsilane (APDMS), resulted in soluble InP QDs bearing Si-H groups on their surface (InP-APDMS) which allow embedding the QDs into vinyl-functionalized silicones through direct chemical bonding, overcoming the phase separation problem. However, the ligand exchange from MA to APDMS caused a significant decrease in the photoluminescent efficiency which is interpreted by ligand induced surface corrosion relying on theoretical calculations. The InP-APDMS QDs were cross-linked by 1,4-divinyltetramethylsilylethane (DVMSE) molecules via hydrosilylation reaction. As the InP-organosilicon nanocomposite grew, its UV-vis absorbance was increased and at the same time, the PL spectrum was red-shifted and, very interestingly, the PL was quenched gradually. Three PL quenching mechanisms are regarded as strong candidates for the PL quenching of the QD nano-composites, namely the scattering effect, Forster resonance energy transfer (FRET) and cross-linker tension preventing the QD's surface relaxation.

• 한국재료학회지
• /
• 제19권8호
• /
• pp.417-420
• /
• 2009

This study develops a highly transparent ohmic contact using phosphorus doped ZnO with current spreading for p-GaN to increase the optical output power of nitride-based light-emitting diodes (LEDs). The phosphorus doped ZnO transparent ohmic contact layer was prepared by radio frequency magnetron sputtering with post-deposition annealing. The transmittance of the phosphorus doped ZnO exceeds 90% in the region of 440 nm to 500 nm. The specific contact resistance of the phosphorus doped ZnO on p-GaN was determined to be $7.82{\times}10^{-3}{\Omega}{\cdot}cm^2$ after annealing at $700^{\circ}C$. GaN LED chips with dimensions of $300\times300{\mu}m$ fabricated with the phosphorus doped ZnO transparent ohmic contact were developed and produced a 2.7 V increase in forward voltage under a nominal forward current of 20 mA compared to GaN LED with Ni/Au Ohmic contact. However, the output power increased by 25% at the injection current of 20 mA compared to GaN LED with the Ni/Au contact scheme.