• IEIE Transactions on Smart Processing and Computing
• /
• 제6권4호
• /
• pp.269-275
• /
• 2017

Automatic vehicle detection is a very important function for autonomous vehicles. Conventional vehicle detection approaches are based on visible-light images obtained from cameras mounted on a vehicle in the daytime. However, unlike daytime, a visible-light image is generally dark at night, and the contrast is low, which makes it difficult to recognize a vehicle. As a feature point that can be used even in the low light conditions of nighttime, the rear lamp is virtually unique. However, conventional rear lamp-based detection methods seldom cope with atypical lamps, such as LED lamps, or flashing turn signals. In this paper, we detect atypical lamps by blurring the lamp area with a low pass filter (LPF) to make out the lamp shape. We also propose to detect flickering of the turn signal lamp in a manner such that the lamp area is vertically projected, and the maximum difference of two paired lamps is examined. Experimental results show that the proposed algorithm has a higher F-measure value of 0.24 than the conventional lamp pairing-based detection methods, on average. In addition, the proposed algorithm shows a fast processing time of 6.4 ms per frame, which verifies real-time performance of the proposed algorithm.

• 한국대기환경학회지
• /
• 제15권4호
• /
• pp.457-461
• /
• 1999

Recently, increasing usage of diesel vehicle, many countries try to reduce the pollutant materials by emission regulation standard. Particularly, in our country, the supplement ratio of diesel vehicle is high, and air pollution by particulate matter(PM) is very serious. So, in theoretical study wer analyzed the formation principle of gaseous emission and PM, the characteristics of CVS-75 mode. In experimental study, we tested exhaust gas reduction of emission and PM, the characteristics of CVS-75 mode. In experimental study, we tested exhaust gas reduction of disel oxidation catalyst(DOC) by CVS-75 mode in light duty diesel vehicle. In case of an automobiletest with the 2,956cc diesel engine which DOC was equipped, CVS-75 mode which is similar to driving conditions on the road was chosen as the restrictive mode of light duty diesel automobile in our country. According to the Pt, the reduction rate of exhaust emission was estimated with using 0.1% high sulfur fuel and 0.05% low sulfur fuel.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.556-559
• /
• 2004

This study was aimed to verify the acceptable contact force between power collector and 3rd rail type conductor rail for the Korean standardized rubber-tired AGT light rail vehicle. The power collector was designed and manufactured to satisfy the Korean standardized Specifications of the rubber-tired AGT light rail vehicle. Based on the dynamic behavior, contact force variation and interruption in the worst installation tolerance of the conductor rail, its initial contact force was set up. With rotary disk type equivalent test apparatus with circular conductor rail, the interruptions were measured. As the results, acceptable contact force was proposed to ensure power collection stability.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권4호
• /
• pp.360-366
• /
• 2005

In the past, when there were few vehicles on the road, the T.O.D.(Time of Day) traffic signal worked very well. The T.O.D. signal operates on a preset signal cycling which cycles on the basis of the average number of average passenger cars in the memory device of an electric signal unit. Now days, with increasing many vehicles on restricted roads, the conventional traffic light creates startup-delay time and end-lag-time. The conventional traffic light loses the function of optimal cycle. And so, $30-45\%$ of conventional traffic cycle is not matched to the present traffic cycle. In this paper we proposes electro sensitive traffic light using fuzzy look up table method which will reduce the average vehicle waiting time and improve average vehicle speed. Computer simulation results prove that reducing the average vehicle waiting time which proposed considering passing vehicle length for optimal traffic cycle is better than fixed signal method which doesn't consider vehicle length.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.365-368
• /
• 2005

The dynamic model was developed to analyze vibration acceleration and ride comfort during the operation of rubber-tired light rail vehicles. The ride comfort for standing passengers was analyzed in accordance with ISO 2631-1, UIC 513R, and CEN Draft prENV 12299 using this model. The result was applied to the detail design of Korean-standard, rubber-tired light rail vehicles, and the detail specifications related to ride comfort was determined based on this result. The ride comfort test was performed along the test track by using 2 car-train, and its result was compared with that of the ride comfort analysis, verifying the validity of the developed dynamic model. It was also verified whether or not the developed Korean-standardized, rubber-tired light rail vehicle met specified target specifications on ride comfort.

• 전자공학회논문지CI
• /
• 제40권4호
• /
• pp.181-192
• /
• 2003

제한된 도로에 급증하는 자동차로 인해서, 기존의 교통신호등은 최적주기기능을 상실하였다 기존의 교통신호등은 승용차 환산계수, 옵셋, 교차로 길이 등을 고려하지 않았으므로 기존 신호등의 30∼45%가 교통현시와 일치하지 않는다. 본 논문에서는 기존 교통신호등의 단점을 알아보고, 퍼지 규칙을 이용하여 교차로에서의 평균주행속도와 평균대기시간을 개선한다. 뿐만 아니라, 인터넷을 이용해서 위험한 도로, 공사 중인 도로 및 최적의 교통상황을 예보하는 기능을 제공할 수 있도록 하였다.

• 방송공학회논문지
• /
• 제14권4호
• /
• pp.475-487
• /
• 2009

We propose a visible light road-to-vehicle communication system at intersection as one of ITS technique. In this system, the communication between vehicle and a LED traffic light is approached using LED traffic light as a transmitter, and on-vehicle high-speed camera as a receiver. The LEDs in the transmitter are emitted in 500Hz and those emitting LEDs are captured by a high-speed camera for making communication. Here, the luminance value of each LED in the transmitter should be found for consecutive frames to achieve effective communication. For this purpose, first the transmitter should be identified, then it should be tracked for consecutive frames while the vehicle is moving, by processing the images from the high-speed camera. In our previous work, the transmitter was identified by getting the subtraction of two consecutive frames. In this paper, we mainly introduce an algorithm to track the identified transmitter in consecutive frames. Experimental results using appropriate images showed the effectiveness of the proposal.

• Elastomers and Composites
• /
• 제49권1호
• /
• pp.53-58
• /
• 2014

가시광촉매의 특성 및 가시광촉매가 코팅처리된 자동차내장재 nylon/polyester 복합섬유에 대한 VOCs의 저감에 대해 알아보았다. 가시광촉매 Weltouch의 결정구조는 아나타제상과 루타일상이 복합된 것으로 약 420nm이상의 파장을 갖는 빛에너지에서도 활성을 나타냈다. 또한 가시광촉매가 처리된 자동차내장재 nylon/polyester 복합 섬유에서 발생하는 VOCs 및 포름알데히드는 현저한 저감효과를 나타냈으며, 섬유를 25회 세탁을 행하여도 가시광촉매의 탈락없이 표면에 견고하게 부착되어 가스분해성능을 유지하는 것으로 나타나서 세탁내구성이 우수한 것을 확인하였다.

• 한국분무공학회지
• /
• 제18권3호
• /
• pp.155-160
• /
• 2013

Worldwide harmonized light-duty vehicle test procedure (WLTP) for emission certification has been developed in WP.29 forum in UN ECE since 2007. The test procedure is expected to be applied to Korean light-duty diesel vehicles at the same time of adoption in Europe. The air pollutant emissions from light-duty vehicles have been regulated with weight per distance travelled which means the driving cycles can affect the results. The six Euro-5 light-duty diesel vehicles including sedan, SUV and truck have been tested with WLTP, NEDC which is used for emission certification for light-duty diesel vehicles, and CVS-75 to estimate how much particle number emission can be affected by different driving cycles. The averaged particle number emissions have not shown statistically meaningful difference. The maximum particle number emission have been found in Low speed phase of WLTP which is mainly caused by cooled engine conditions. The amount of particle number emission in cooled engine condition is much different as test vehicles. It means different technical solution is required in this aspect to cope with WLTP driving cycle.

• 자동차안전학회지
• /
• 제11권4호
• /
• pp.16-21
• /
• 2019

In recent years, most automobile manufacturers have been using slim light source images to imprint their own brand image and identity. A light guide type lamp is widely used for making these kinds of a slim light source image. A light guide lamp means using a light emitting diode light source at one end of a long cylindrical pipe. The light from the light emitting diode source moves through the pipe by total reflection principle. Moving light is sent forward by various optic structures which is applied in the cylindrical pipe. However, the light guide lamp has a problem that the image of the light differs depending on the viewing direction, and in some cases there is dark section. It means light guide has low quality about lighting image. In this paper, trying to improve the fundamental problems of the light guide mentioned above by using various triz methods. Through functional modeling, estimating the factors affecting the light in the light guide lamp and make various ideas to improve the lighting image using the chain effect cause analysis, function oriented search scientific database techniques. Using these kinds of various TRIZ methods, finally find solutions that can improve the brightness and lighting uniformity of the light guide lamp. The ideas obtained in this paper were applied to actual vehicle development, and several patents achievements were obtained. In conclusion, it is proved that TRIZ method is useful for making ideas in actual automobile industrial field and is also a useful method for acquiring patent.