• 아시안잔디학회지
• /
• 제9권3호
• /
• pp.253-260
• /
• 1995

This study is aimed to understand the effects of temperature, light and GA soaking treatment on the seed germination of perennial ryegrass 'Dandy', creeping hentgrass 'Penlinks', tall fescue 'Arid' and Kentucky hluegrass 'Nasaw'. These experiments are carried in vitro, and their results obtained are summarized as the followings ; The optimum temperature for seed germination of perennial ryegrass 'Dandy' was found to he ranged at 20~30$^{\circ}C$, and the optimum temperature for germination of creeping bentgrass 'Penlinks', tall fescue 'Arid' and kentucky bluegrass 'Nasaw' seeds was found to be ranged at 20~25$^{\circ}C$, whereas the germination percentage under the below or above temperature of this range decreased. The germination of perennial ryegrass 'Dandy' and tall fescue 'Arid' seeds showed no effect on light, and while the germination percentage of creeping hentgrass 'Penlinks' increased more highly under the dark condition than under the light condition. The germination percentage decreased according to the higher temperature. The germination of Kentucky bluegrass 'Nasaw' seeds increased more highly under the dark condition than under the light condition at 20~25$^{\circ}C$, whereas the germination percentage under the dark condition at 15$^{\circ}C$ and 30$^{\circ}C$ decreased. In case of GA soaking treatment of seeds, all the cool season turfgrasses tested showed their own promoting effects on seed germination. The early germination of tall fescue 'Arid' was good without the soaking times. Creeping bentgrass 'Penlinks' and perennial ryegrass 'Dandy' had re-spectively the highest germination percentage at 10min and 1hr soaking treatment, and the longer the soaking time, the lesser the germination percentage. Kentucky bluegrass 'Nasaw' obtained the best results at 24has soaking treatment, and the longer the soaking time, the better the ger-mination percentage.

• 수산해양기술연구
• /
• 제55권3호
• /
• pp.190-197
• /
• 2019

This study investigated the luring effect of the sardine bait, which is used to catch octopus with pot, as the preliminary study for the development of alternative bait for octopus pot. The soaking time for bait was divided into "5 days or less" and "11 days or longer" The number of times octopus entered the pot with bait and the empty pot was investigated under dark adaptation and light adaptation processes and the distribution of tank section was investigated under light adaptation process. The case of "11 days or longer" sardine soaking time showed higher rate of distribution in the section of pot with bait compared to the case of "5 days or less" In the case of "5 days or less" soaking time, the number of times the octopus entered the pot with bait was similar to that it entered the pot without it even during dark adaptation and light adaptation. However, in the case of "11 days or longer", the octopus entered the pot with bait more quickly than the pot without bait and more frequently during dark adaptation hours. There were cases where the octopus did not enter any pot. In the case of "5 days or less", with less decomposition of baits, the octopus entered the empty pot more during light adaptation process, and it appeared that the pot was used as a hideout.

• Applied Science and Convergence Technology
• /
• 제27권2호
• /
• pp.42-45
• /
• 2018

Photovoltaic and optoelectronic devices based on hybrid metal halide perovskites ($MAPbX_3$; $MA=CH_3NH_3{^+}$, $X=Cl^-$, $Br^-$, or $I^-$) are rapidly improving in power conversion efficiency. Also, during recent years, perovskite single crystals have emerged as promising materials for high-efficiency photovoltaic and optoelectronic devices because of their low defect density. Here we show that the light soaking effect of mixed halide perovskite ($MAPbBr_{3-x}I_x$) single crystals can be explained using photoluminescence, time-resolved photoluminescence, and Raman scattering measurements. Unlike Br-based single crystal, Br/I mixed single crystal show a strong light soaking effect under laser irradiation condition that was related to the existence of multiple phases.

• 한국자원식물학회지
• /
• 제29권6호
• /
• pp.712-721
• /
• 2016

This experiment was conducted to investigate the endophytic bacterium Herbaspirillum spp effect on seed germination and sprout growth of tartary buckwheat. Inoculant concentration (%v/v) and seed soaking time were applied 10, 20 and 40% and 0, 4, 8, 12 hour, respectively. The experiment was carried out in a growth chamber maintained temperature at 20, 25 and $30^{\circ}C$ without light for 7 days. Results showed that, 10 to 20% (v/v) inoculant concentration by 4 to 8 h seed soaking time at $20^{\circ}C$ temperature increased seed vigor rate and total seed germination rate 80-95% and 90-100%, respectively. On the other and, seed inoculation with Herbaspirillum spp. increased hypocotyl length (13-15 cm), root length (8-11 cm), total fresh weight (135-296 g) and total dry weight (7-10 g), compared to control. It is indicated that sprouts growth and yield depends on inoculation concentrations, seed soaking time and temperature. Therefore, it would be suggested that seed inoculation with Herbaspirillum spp. at concentration of 10 to 20% (v/v), soaking time 4 to 8 h and temperature $20^{\circ}C$ promote seed germinations and sprout growth rate of tartary buckwheat.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.87-93
• /
• 1997

The bonding strength evaluation of light weight materials for electrical vehicle applications has been performed through single lap joint tests in which the design parameters such as fillet, joint style, adherend, bonding overlap length,bonding thickness, and environmental condition(soaking time in $25^{\circ}C$ water) are considered. It is experimentally oberved that lap shear strength of joint increases for higher fillet height, longer overlap length, and thinner bonding layer thickness. Al-Al adherend combination shows much higher lap shear strength than AL-FRP and FRP-FRP adherend combinations. Riveting at adhesive bonded joint of AL-AL adherend combination makes lap shear strength decrease. Effect of soaking time on lap shear strength is negligible.

• 한국안광학회지
• /
• 제16권3호
• /
• pp.237-245
• /
• 2011

목적: 안경 렌즈에 물리적, 화학적 자극이 반복적으로 가해졌을 때 렌즈 코팅막의 기능에는 어떠한 변화가 나타나는 지를 알아보고자 하였다. 방법: CR-39 재질의 안경 렌즈 표면에 물리적, 화학적 자극으로 테이프 떼기, 아세톤 문지르기, 아세톤에 침윤 및 증류수에 침윤하기를 시행한 후 렌즈 표면의 변화, 광투과율 변화, 김서림 시간 변화 및 손상된 렌즈 표면의 안정성 여부를 측정하였다. 결과: 하드 코팅의 기능 변화를 알아보기 위한 표면관찰시 아세톤에 침윤한 안경 렌즈만이 침윤 30분 후부터 표면의 변화가 나타났다. 반사방지 코팅의 기능 변화를 알아보기 위한 광투과율 측정시 증류수에 180분간 침윤한 안경 렌즈는 1% 정도의 미세한 감소를 보인 반면 아세톤에 침윤시킨 렌즈에서는 침윤 60분 후 반사방지 코팅의 기능이 거의 소실됨을 알 수 있었다. 안티포그 코팅의 기능 변화를 알아보기 위한 김서림 지속시간 측정시 아세톤에 침윤시킨 안경 렌즈에서 김서림 지속시간이 증가하였다. 자극에 의해 손상받은 코팅막의 안정성을 알아보았을 때 테이프로 떼어내기, 아세톤으로 문지르기, 증류수에 침윤 및 아세톤에 침윤시킨 렌즈 표면의 코팅 손상이 관찰되었다. 결론: 반복적인 물리적, 화학적 자극으로 인하여 안경 렌즈의 코팅 변화가 관찰되었으므로 안경 조제 과정 중이나 안경 착용 시 이에 대한 주의가 요구된다.

• 한국자원식물학회지
• /
• 제29권3호
• /
• pp.339-346
• /
• 2016

This study was carried out to develop an effective seed propagation method for Thalictrum rochebrunianum var. grandisepalum (H. Lev.) Nakai by analyzing seed dormancy types and germination characteristics. Seeds were collected between September to October at Gangwon province, and well-selected seeds were used while being dry-stored at 4±1℃. The seed size ranged 4.52 × 1.58 ㎜ and the weight of thousand seeds were 1,603.5 ± 0.02 ㎎. The moisture content was 7.2%. Seeds were achene type, and morphology characters showed an elliptical shape and rough texture, and light brown in color. Moist-chilling treatment was conducted for dormancy breaking because the seeds had an undeveloped embryo of liner type. The embryo had developed during a moist-chilling period, constantly, and fully developed in 10 weeks. Consequently, it seemed to be non-deep complex or intermediate complex type of morphophysiological dormancy, and embryo dormancy was broken by wet-chilling for 10 weeks. After 10 weeks of wet-chilling treatment, seed germination began. Germination percentage was higher in dark condition raher than light condition and recorded the maximum at 25℃ in the dark (16.3%). A pre-soaking treatment with a combined plant growth hormones promoted germination and shortened T₅₀. Specifically, seed germination of 84.5% was achieved by pre-soaking of seeds with a combined solution of 500 ㎎/L GA₃ and 10 ㎎/L kinetin for 24 h after a wet-chilling treatment for 10 weeks. Thus the effect of plant growth hormones coupled with chilling temperature on seed breaking dormancy provide asubsequent growth of seedlings for successful plantation.

• Current Photovoltaic Research
• /
• 제4권4호
• /
• pp.155-158
• /
• 2016

Long-term stability of dye-sensitized solar cell (DSSC) module is critical for the commercialization. We investigated the effect of sealing technology on the long-term stability of the $10cm{\times}11cm$ sized DSSC modules. We applied the concept of secondary sealing to the module and then performed several stability tests such as humidity cycle, 1 sun light soaking and outdoor stability tests. The enhanced stability was confirmed for the DSSC module employing optimized sealing materials and architectures.

• 한국잡초학회지
• /
• 제16권1호
• /
• pp.8-13
• /
• 1996

주요(主要)논 잡초(雜草)의 채종후(採種後) 일수(日數)에 따른 휴면정도(休眠程度) 및 발아특성(發芽特性)을 구명(究明)하여 효과적(效果的)인 잡초방제(雜草防除)의 기초자료(基礎資料)를 얻고자 시험(試驗)하였던 바 그 결과(結果)는 다음과 같다. 1. 채종후(採種後) 일수별(日數別) 휴면타파정도(休眠打破程度)를 보면 피, 너도방동사니, 자귀풀, 여뀌바늘, 가막사리 등은 휴면정도(休眠程度)가 약해 저장조건(貯藏條件)에 상관없이 채종후(採種後) 30일에도 10~30%의 높은 발아율을 보였으나 올챙이고랭이, 가래, 사마귀풀, 물달개비 등은 120일간 저장(貯藏)에서도 전혀 발아(發芽) 하지 않았다. 2. 발아상(發芽床)의 광(光) 유무(有無)와 발아율(發芽率)을 보면 목본 화본과(禾本科) 잡초(雜草)인 피는 명조건(明條件), 암조건(暗條件)공히 발아율(發芽率)에 차이가 적었으나 너도방동사니, 여뀌 등은 명조건(明條件)에서만 발아(發芽)하였으며 올챙이고랭이, 여뀌바늘, 가막사리 등은 암조건(暗條件)에서 5% 미만의 발아율(發芽率)을 보였다. 3. 화학물질(化學物質) 및 증류수(蒸溜水)침적에 따른 초종별(草種別) 휴면타파(休眠打破) 정도(程度)를 보면 올챙이고랭이는 화학물질(化學物質) 침적효과(漫積效果)는 없었으나 증류수(蒸溜水) 침적효과(漫積效果)가 있었으며, 사마귀풀 및 가막사리는 Acetone, Chloroform 및 증류수(蒸溜水) 침지가, 그리고 여뀌바늘은 Chloroform의 침지(沈漬) 처리에서 휴면타파(休眠打破) 효과(效果)가 컸다.

• 한국버섯학회지
• /
• 제7권3호
• /
• pp.115-121
• /
• 2009

표고 톱밥배지의 갈변을 촉진시키기 위하여 광을 조사한 결과 100Lux 이상의 광처리에서 원하는 수량을 얻을 수 있었으며 암상태에서의 자실체의 발생은 기형버섯율이 높았으며 수량도 저조하였다. 그러나 갈변은 200 Lux이상의 광에서 정상적으로 이루어졌으며 가장 빨리 갈변이 되기 시작하였다. 온도별 처리에서는 $25^{\circ}C$의 배양온도를 유지하여 배양한 것이 갈변시작일도 가장 빨랐고 갈변도 가장 많이 진행되었으며 수량과 개체중량도 가장 높았으며 정상적인 수량을 나타낸 처리 중 기형버섯의 발생량도 가장 적었다. 배지내에 통기성이 미치는 영향을 조사하기 위하여 솜마개의 크기를 달리하여 처리한 결과 마개의 크기가 클수록 균사의 생장량도 빨랐으며 갈변이 이루어지는 시기도 빨랐다. 그러나 자실체의 수량은 솜마개의 직경이 16mm일 때 가장 높았으며 마개가 클수록 배지내의 $CO_2$함량은 낮았으며 배양기간 중 갈변이 진행되는 8주에서 14주 사이에서 $CO_2$함량이 가장 높았다. 배양기간 중 $C_2H_4$함량은 8mm의 솜마개에서 가장 많이 발생하였으며 12, 16, 20, 0, 4mm의 솜마개으로 발생하였다. $C_2H_4$함량도 $CO_2$함량과 같이 8주에서 14주사이의 배양기간에서 가장 높았다. 침수시간에 따른 자실체의 발생효과를 구명하기 위하여 침수시간별로 자실체의 수량과 효소들의 활성을 조사하였다. 침수를 하지 않은 배지는 수량이 침수를 한 배지에 비하여 약 40%가 감소하였다. 침수시간은 4시간과 15시간 침수한 것이 각각 165g/1000ml, 175g/1000ml 이었다. 침수시 cellulose분해효소는 침수에 따른 변화가 없으나 lignin 분해효소인 laccase는 침수시간에 따라 약 4 배정도까지 효소의 활력이 증가되었다.