• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.3
• /
• pp.99-105
• /
• 2011

This paper described the effect of the multiple injections on the emission characteristics and combustion stability in a common rail diesel engine. In order to investigate the influence of multiple injections in a passenger car diesel engine, the injection strategy was varied with pilot injection, post injection and one main injection at various conditions. Based on the experimental results, the combustion and emissions characteristics were analyzed for the various injection strategies such as main, pilot-main, double-pilot-main, double- pilot-main-post injection strategy. It is revealed that the $NO_X$, HC and CO emissions are reduced by double pilot and post injection at medium load, however, soot emission is increased. Also, in the case of multiple injection, the combustion pressure is increased smoothly near the TDC and the coefficient of variation and fuel consumptions are decreased.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.457-465
• /
• 2009

Subway system including light-rail transit system is the representative public urban transportation. Accordingly, Nothing is more important than the safety operation as well as passengers' convenience. Due to the fire disaster of Daegu subway on 2003, more strict regulations of detecting fire and of conducting on emergency circumstances. However, regardless of this improved management, it was reported that installations of lots of fire-detection facilities may be harm than good to operate subway system due to frequent malfunction of some fire-detection facilities. It may cause mis-alarm for fire and induces abnormal operation of subway due to the strict regulation; the train shall be stopped on emergency circumstances. Therefore, in this paper, new scheme on surveiling breaking-out-of fire in the station is suggested with new IT technologies, Wireless Sensor Network(WSN) and CCTVs. which were integrated with an intelligent software. This intelligent system enables to surveil breaking-out-of fire in real time through sensor network technology and watch the emergency site on CCTV as well. Through this system, subway organizers could cope with the emergency circumstance rapidly as well as judge precisely whether fire breaks out or not.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.247-250
• /
• 2009

Awareness of resource conservation and pollution prevention has been continually increasing. The proven benefits from CFRP's unique combination of light weight and high strength compare to conventional material is well suited for minimizing fuel consumption during vehicle in particular rail operation. Responding the awareness, this work intends to study CFRP's recycling method that is not only technical performance but also environmental view point. According to prior work of technical performance test, this work aims at quantifying the footprint of energy and GHG derived from the two appreciated performance of pyrolysis and acids recycling methods. The streamline LCA is the concept for systematic assessment. The boundary is scoped at the recycling activity, consequently, the data in and out from the specific target activity are obtained under the gate to gate data collection. Its function is recovery carbon fiber. To count and compare function, functional unit is set at 60% of recycling rate. Korea database is mainly source for acquiring the footprint of both. The numerical results presented that the energy footprint of acids and pyrolysis is 164.95 and 1,199.88 MJ-eq., respectively. Meantime, the GHG footprint of is 1,196.22 and 5,916.08 g CO2 eq. for acids and pyrolysis. In summary, the acids recycling method is, in regarding the environmental performance, better than pyrolysis recycling method.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1936-1942
• /
• 2009

Shinbundang-line is new Metropolitan Railway which was invested by private capital and is under construction for opening in 2010. Now Shinbundang-line pursues various innovation, for example, an express train which uses long distance of each station, and an unmanned operation. And it may be independent of existing metropolitan railway system from a viewpoint of line and fare system. So according to the present plan, Shinbundang-line will be not able to get sufficient demand because of weak connection with existing lines and monotonous function of the line. And it may be difficult to deliver various innovation which Shinbundang-line prepares to passengers. Hereupon, in this paper, I propose 3 methods for increasing competitive power of Shinbundang-line railway. First, making Shinbundang-line a trunk railway line of southern metropolitan area was proposed in relation to northern and southern extension of it. In addition connection with bus and light rail was discussed. Second, multipurpose usage of Shinbundang-line was proposed as express train and conventional passenger train in that line in addition to simple metropolitan railway. Finally, an effective operation method which Shinbundang-line must have was proposed from unmanned driving and fare system side. These methods can improve Shinbundang-line and then it will solve traffic congestion of southern metropolitan area effectively.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1799-1804
• /
• 2009

Bimodal Tram is spotlighted for alternative public transportation system which have punctualness, efficiency, and convenience running between capacity of bus and light rail transit. It have the advantage of automatic operation system when it runs at exclusive right-of-way as like as railway, runs as same as a bus at road concurrently. However, concrete construction plan is not established since the law as well as government subsidy are not defined. For activating bimodal tram construction, this paper analyzed as below. 1) understanding obstacles of activating construction through current status of local governments' bimodal tram promotion plan, 2) finding essential elements for legislation through transportation mode characteristics comparison and system rules analysis, 3) related foreign law analysis.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.4
• /
• pp.403-411
• /
• 2012

This study presents the nano-sized particle emission characteristics from a small turbocharged common rail diesel engine applicable to prime and auxiliary machines on marine vessels. The experiments were conducted under dynamic engine operating conditions, such as steady-state, cold start, and transient conditions. The particle number and size distributions were analyzed with a high resolution PM analyzer. The diesel oxidation catalyst (DOC) had an insignificant effect on the reduction in particle number, but particle number emissions were drastically reduced by 3 to 4 orders of magnitude downstream of the diesel particulate filter (DPF) at various steady conditions. Under high speed and load conditions, the particle filtering efficiency was decreased by the partial combustion of trapped particles inside the DPF because of the high exhaust temperature caused by the increased particle number concentration. Retarded fuel injection timing and higher EGR rates led to increased particle number emissions. As the temperature inside the DPF increased from $25^{\circ}C$ to $300^{\circ}C$, the peak particle number level was reduced by 70% compared to cold start conditions. High levels of nucleation mode particle generation were found in the deceleration phases during the transient tests.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.570-576
• /
• 2010

This paper presents the use of the Petri Net Method for modeling railway tracks. The Petri Net is defined as having the characteristics of a parallel, asynchronous, distributed, inconclusive, statistical, etc. information handling system and is a graphical mathematical modeling tool to study the specifics of active movement. It's proven use can be seen at the Korean type Light Rail testing tracks where they modelled the Petri Net method using the train track encasing the segment, track, turnout, and platform as a singular factor and even though two trains either travelling in the same or opposite directions on a single test track equipped with a sidetrack can travel with the guarantee that the two will not collide.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.4
• /
• pp.640-645
• /
• 2015

Near surface transit system has should be constructed as installation cost of light rail transit with elevated track. So, distance between two substations is longer than conventional system. The long feeding distance results in severe voltage drop. This paper proposes a PWM rectifier instead of diode rectifier. The PWM rectifier has some advantages. This is able to control output voltage constantly to reduce voltage drop and to use regeneration power without additional inverter. This paper analyse on improved voltage profile and cost of substation with PWM rectifier. The analysis of voltage profile use PSIM, and the installation cost of substation with PWM rectifier is compared to substation with diode rectifier.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.3
• /
• pp.266-272
• /
• 2014

The Leadership in Energy and Environmental Design (LEED) Green Building Rating System provides third-party verification for environmentally sustainable construction. But while LEED-certified buildings provide healthier work and living environments, Previous studies have shown that LEED certification does not provide any direct economic incentives to owners and developers. To address this issue, this study aims to investigate the economic benefits of LEED criteria. The objective of this study is to examine whether or not there is a significant correlation between median household income and the number of bus stops and light rail stations for a given parcel that meet LEED sustainable site criteria for public transportation access. The findings showed that the number of bus stops had a positive correlation with median household income, which means that more bus stops a given parcel had that met LEED criteria, the greater the median household income of a block group where the given parcel was located would be, though this positive correlation was very weak.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.8
• /
• pp.1210-1215
• /
• 2012

Traction motors for driving and power conversion devices using semiconductor switch are equipped with a transportation systems such as an electrical railway system. Power conversion devices have the possibility of malfunction by external electromagnetic waves. As a result, these could affect the safe operation of the railway. Moreover, the electromagnetic waves above safe limits will be harmful to the passengers inside the railway vehicles or anyone working around the rail-track. For this reason, the importance and need about the reliability check and complement of electromagnetic waves generated from the IPT(Inductive Power Transfer) system have been suggested for the safe application of the IPT system to the railway system. In this study, prediction for the electromagnetic wave properties was conducted through FEM(Finite Element Method) analysis of 5kW-class IPT system design model. Next, the 5kW IPT system prototype was made and then the small-scaled railway vehicle was made to mount the IPT system and the energy management system. Finally, the electromagnetic waves generated from the real small-scaled IPT system were measured and analyzed, and then the reliability check of predictions by FEM analysis were carried out.