• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.39-44
• /
• 2014

In this paper, we study the light pen emulator implementation that can be used in industrial computer. For use in industrial control field, an input device of an industrial machine is an electronic pen is usually used, but now many cases, a light pen cannot be used to the computer. In this study, the light pen emulator to substitute for the function that is available to the peripheral device on the PC, now. So we want to increase the utilization of industrial computer in this research. The light pen emulator was designed by USB HOST, CPLD and MPU. Light pen signal, after interpret the input from the touch screen and mouse and USB system data, was output by calculating screen coordinates. As a result, we showed that it is possible to use the computer in a variety of industrial devices such as a mouse, digitizer, touch screen, stylus, and designed emulator.

• Preventive Nutrition and Food Science
• /
• v.14 no.4
• /
• pp.349-353
• /
• 2009

The effects of packaging materials on preserving the functional component of pine bud beverage stored under UV (ultraviolet) light exposure conditions were studied. The order of UV light blocking properties of the selected packages was: opaque can> opaque PET (polyethylene terepthalate) with green lamination=transparent PET with 10% PEN (polyethylene naphthalate) blending> transparent PET, and did not depend on film thickness in specified range. At 20${^{\circ}C}$, the order of preserving degree of original color and endobornyl acetate, which is quality index of pine bud beverage, was the same as above. Exposure to UV light can cause of deterioration of functional food components, but green color lamination and blending of PEN materials with transparent PET help to preserve the UV sensitive pine bud beverage components. However, the treated PET bottles have poorer preservation capabilities than the opaque cans. Transparent PET with PEN blending, in particular, will be very useful packaging material for colorful functional beverage preservation by helping to protect the ingredients while attracting consumer attention.

• Applied Biological Chemistry
• /
• v.17 no.1
• /
• pp.54-62
• /
• 1974

62 specimens of deteriorated rice which were collected all over Korea, were classified according to their color outlooks, and the causitive microorganisms were isolated and identified. The following results were observed; 1. 62 specimens of deteriorated rice were classified according to color outlooks into 7 types; reddish yellow, light reddish yellow, light gray yellow, light reddish yellow, light gray yellow, light red, ligt gray, dark gray and rice weevil type. 2. The isolated microorganisms from 62 specimens of deteriorated rice were 44 species, 5 genera of molds, 1 species of yeast, and 14 species, 4 genera of bacteria. 3. The frequently observed microorganisms which caused the deterioration were Asp. glaucus group, Asp. oryzae, Asp. candidus, and Asp. versicolor. Among bacteria, Bacillus was dominant. 4. The relationship between color outlook types and the deterioration causing microrrganisms was not definite, but Pen. islandicum from reddish yellow, Asp. candidus and Asp. clavatus from light reddish yellow, Asp. glaucus group, Asp. candidus, Asp. versicolor and Asp. fumigatus from light red, Asp. oryzae from light gray yellow, and Asp. glaucus group and Pencillium species from light gray and dark gray were chiefly isolated. 5. As mycotoxin producing fungi, Asp. fumigatus, Pen. citrinum, Pen. islandicum, Asp. flavus, and Asp. ochraceus were detected, but their growth frequencies were not very high to be problems except Pen, islandicum which infected an imported rice sample heavily.

• Macromolecular Research
• /
• v.10 no.1
• /
• pp.44-48
• /
• 2002

The supermolecular structures of poly(ethylene terephthalate) (PET), poly(ethylene 2,6-naphthalate) (PEN), and their blend were investigated with optical microscopy and small angle light scattering. With increasing the crystallization temperature, incomplete spherulitic texture was developed for the PET samples. At a high crystallization temperature of 220 $^{\circ}C$, the light scattering pattern represented a random collection of uncorrelated lamellae. The general morphological appearances for the PEN samples were similar to that of the PET. A notable feature was that the spherulites of the PEN formed at 200 $^{\circ}C$ showed regular concentric bands arising from a regular twist in the radiating lamellae. The spherulitic morphology of the PET/PEN blend was largely influenced by the changes of the sequence distribution in polymer chains determined by the level of transesterifcation. The increased sequential irregularity in the polymer chains via transesterification caused a morphological transition from a regular folded crystallite to a tilted lamellar crystallite.

• Analytical Science and Technology
• /
• v.17 no.4
• /
• pp.315-321
• /
• 2004

The aim of this study was to investigate the evidential value of blue and black ballpoint pens on paper by nondestructive techniques. In this work, 21 blue and 22 black ballpoint pens which were purchased on different brands were analyzed by Raman Spectroscopy and Video Spectral Comparator (VSC). Surface-Enhanced Resonance Raman Spectroscopy (SERRS) with excitation at 685 nm and VSC with several spot light filters were used for the discrimination of ballpoint pen inks. In the SERR spectra, the ballpoint pen inks on paper could be shown sharp spectral bands and distinguished by their band shapes and relative intensities. In the blue and black ballpoint pen inks, the discriminating powers (DP) by SERRS were 0.85 and 0.67 and the DP by VSC were 0.88 and 0.90, respectively. The DP by combined sequence of techniques was all 0.97 in both black and blue ballpoint pen inks.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.193-196
• /
• 2013

Purpose: This study was investigated to find out a useful instrument instead of direct ophthalmoscope for ocular photostress recovery time (PSRT) test. Methods: The PSRT test was performed using direct ophthalmoscope, trans illuminator, pen light, and camera flash for 48 subjects (average age 22.88 years, 96 eyes) who were corrected to 0.8~1.2 of visual acuity. Results: Each mean of PSRT measured by direct ophthalmoscope, trans illuminator, pen light, and camera flash was $27.90{\pm}18.40$ sec, $23.73{\pm}12.99$ sec, $21.31{\pm}15.57$ sec, and $18.98{\pm}11.64$ sec, respectively. The difference of PSRT between the eyes corrected more than 1.0 and the other eyes corrected under 1.0 of visual acuity was not found significantly. And there was no difference between dominant eyes and nondominant eyes of PSRT. Conclusions: Though the nearest instrument to direct ophthalmoscope was trans illuminator, pen light and camera flash could be the useful instruments for PSRT test.

• Journal of Korea Multimedia Society
• /
• v.20 no.4
• /
• pp.713-720
• /
• 2017

We present a non-photo realistic pen-ink drawing method for outlining and shading of the input image. Especially, we focus on the detailed illustration of the image of which stroke's direction is important. The pen-ink renderer is an alternative display models user can generate traditional illustration renderings of their photo realistic image. The previously proposed pen drawing methods produce feasible description in general image but it is difficult to express in detail for the sophisticated images that need to consider the direction of stroke for each image region. In order to overcome the disadvantages of the conventional method, a direction vector is extracted from a tensor field and we determine a stroke's direction in consideration of not only an edge area but also a gradient of a surrounding area in the image. For more detailed description for the sophisticated image, we generate white noises based on the light and shade of the input image and determine the direction and length of the stroke by using the tensor field for each generated white noise. The proposed method works particularly well for traditional architectural images where the direction and detailed description of the pen is important.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.303.1-303.1
• /
• 2016

Polymer-like amorphous carbon films were deposited on polyethylene naphthalate (PEN) substrate by plasma-enhanced chemical vapor deposition (PECVD) and their water vapor transmission rates (WVTR) were tested. propane was used as precursors. To make a polymer-like amorphous carbon film the deposition rate, surface roughness, light transmittance, and WVTR of the films were characterized as a function of the precursor feed ratio and plasma power. The water vapor transmission rates of bare PEN film and single layer PAC on PEN substrate were 6.95 g/m2/day and 0.3 g/m2/day, respectively. The superior property the water vapor permeability of thin layers of PAC was attributed to uniform coverage and good adhesion between PAC film and PEN substrate.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.128-133
• /
• 2009

In this paper, an optical touch panel device is newly proposed, with operating principle based on the optical coupling between a pointing pen having a built-in light source and perpendicularly crossed optical waveguide arrays. In order to enable an external light to couple into a waveguide core, the auxiliary pyramidal structures are introduced into all intersecting points located periodically along optical waveguides. The shape is optimized for minimizing the unwanted propagation loss due to the same structure by a ray tracing method. For the optical waveguide with the size of $50{\times}50{\mu}m^2$, the bottom width, height, and slope angle of the optimized pyramidal structure are $50{\mu}m$, $22.5{\mu}m$, and $42^{\circ}$, respectively. The optical coupling efficiency of about 97.8% and the average propagation loss of 0.3 dB/mm were achieved for the optimized touch panel. Finally, it is found from the tolerance analysis that tilting of the pen up to ${\pm}12^{\circ}$ can be allowed.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.4 no.1
• /
• pp.85-102
• /
• 1980

Accepting the necessity for maintaining the objectives of the existing circulation system, the computer-based system could be designed by the system analyst and librarians to gain a variety of improvements in the maintenance, accessibility of circulation records and more meaningful statistical records. If the terminal can be operated on-line, then this circulation data is transmitted directly to the computer, where it may update to the circulation file immediately or alternatively be kept in direct access file for updating in batch mode. on-line system in the circulation operations is "data-collection system" and "Bar-coded label system" Bar-coded label system is simple, quick, and error-free input of data. Attached to CRT terminal is a "light pen" which is hand held and will read a bar-coded label as the pen is passed over the labels (one affixed to the book itself, other carried on the borrower cards). Instantaneously the data concerning transaction is stored in the central mini-computer. It is useful, economical for us to co-operate many libraries in Korea and design borrower's ID code, book no., classification code in the Bar-coded label system by the members of the computer center and the library staff at every stage. As for book loan, the borrowers ID code, book number and classification code are scanned by the bar-code scanner or light pen and the computer decides whether to loan and store the data. The visual display unit shows the present status of a borrowers borrowing and decides whether borrower can borrow.