• 전기의세계
• /
• v.19 no.6
• /
• pp.8-12
• /
• 1970

A Device is described which intensity modulates a light beam at modulating frequency in the M/W region. A Method of designing a practical crystalline microwave-Freg. light modulator has been described. In addition, Electrooptic properties and operation as light modulator of NH$_{4}$H$_{2}$po$_{4}$ is described. A light path is provided through the crystal into a suitably oriented analyzer. The intensity of the light beam emerging from the latter varies at the same rate as the cavity frequency.

• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.261-269
• /
• 2021

Binary-phase complex spatial light modulators (BP-C-SLMs) are proposed and simulated. This study shows that bottom-top mirror-symmetrical uniaxial systems between two orthogonal polarizers allow one to construct BP-C-SLMs. BP-C-SLMs double the information-handling capacity per pixel, compared to the conventional amplitude-only spatial light modulators (A-SLMs), as well as being simply implemented with a single spatial light modulator (SLM), rather than a combination of an A-SLM and a binary-phase SLMs. Under limited conditions, BP-C-SLMs can control only the amplitude in single-phase space, and act as A-SLMs.

• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.35-39
• /
• 1995

After making the light modulator using the BLN-PZT 9.0/65/35 specimen which has the slim-loop hysteresis characteristics and quadratic electro-optic characteristics, switching and spectral response characteristics were investigated. As the results of switching characteristics of the light modulator, it was found that the transmitted light intensity was modulated by both AC and pulse voltage. From the possibility of the selective transmission of the RGB(Red, Green, Blue) spectrum with electric field, the application for the light modulator, light shutter and color filter was expected.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.659-665
• /
• 2008

We demonstrate experimentally that the method of Two-pupil optical scanning technique with PAL-spatial light modulator is capable of performing real-time joint transform correlation(JTC) optical system. Optical addressing is achieved by the use of a photosensitive layer of $\alpha$ - Si which controls the electric field across the liquid crystal The demonstrated technique is based on two-pupil optical heterodyne scanning. The method is independent of a spatial light modulator (SLM) in the Fourier plane. We develop the theory of the technique and evaluate a performance of the method by experimentally estimating the correlation between the target image and the reference image.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.2
• /
• pp.1-12
• /
• 1970

In this paper, theoretical and experimental study about the light modulation at X-band(9375MHz) micro wave, using the linear electro-optic effect, has been described. The electro-optic crystal, KDP (potassium dihydrogen phosphate)is used for modulator crystals which is composed resonated modulator. Output performances of modulated wave through movable short positions are presented. It was critically respond from 2. And the output modulated intensity was compared with theoretical curve. Consequently, in spite of many problems remain yet, most promissing and more sucessful modulator configurations are compleely given.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.371-375
• /
• 2015

The impact of equivalent optical bandwidth on the performance of a system using a reflective electroabsorption modulator (R-EAM) based optical source has been experimentally evaluated with signals operating at 2.5 Gb/s and beyond. The equivalent optical bandwidth of our source with a broadband seed light was simply adjusted by using a bandwidth tunable optical filter. From the measurements, we have estimated the required equivalent optical bandwidth of our source for an error-free transmission (@ bit-error-rate of $10^{-12}$) and a forward error correction (FEC) threshold of $2{\times}10^{-4}$.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.32-39
• /
• 1999

In this paper, we made CGH patterns that had continuous amplitude distribution binary coded patterns with two different methods, and analyzed those patterns by using LCSLM (liquid crystal spatial light modulator). The error diffusion algorithm and direct quantization method were used as the binarization methods. The parameters of overall average brightness, mean square error, and diffraction efficiency were used in the comparison of reconstruction characteristics. The LCSLM which we used in this experiment was a binary reflective ferroelectric liquid crystal spatial light modulator addressed electrically with 256$\times$256 pixels, 87% fill factor and 15$\mu$m pixel pitch.

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.93-98
• /
• 2000

Drive line shape for reflective magneto-optic spatial light modulator has been designed by computer simulation. A factor of 3 improvement in pixel switching sensitivity and power consumption, compared to the conventional reflective magneto-optic spatial light modulator, has been achieved by the use of wedge-shape drive line and a soft magnetic layer. A factor of 2 higher optical efficiency and a factor of 2 simpler fabrication process have been achieved by the use of drive lines that covers most of the surface of pixel and unpatterned insulator.

• Journal of information and communication convergence engineering
• /
• v.13 no.4
• /
• pp.280-285
• /
• 2015

Double random phase encryption (DRPE) is one of the well-known optical encryption techniques, and many techniques with DRPE have been developed for information security. However, most of these techniques may not solve the fundamental security problem caused by using fixed phase masks for DRPE. Therefore, in this paper, we propose a key phase mask updating scheme for DRPE to improve its security, where a spatial light modulator (SLM) is used to implement key phase mask updating. In the proposed scheme, updated key data are obtained by using previous image data and the first phase mask used in encryption. The SLM with the updated key is used as the second phase mask for encryption. We provide a detailed description of the method of encryption and decryption for a DRPE system using the proposed key updating scheme, and simulation results are also shown to verify that the proposed key updating scheme can enhance the security of the original DRPE.

• Journal of Magnetics
• /
• v.11 no.3
• /
• pp.143-146
• /
• 2006

We attempted to fabricate a new type of magneto optic spatial light modulator (MO-SLM) for multiple-tone modulation by using in-plane magnetization. In the MO-SLM, magnetic property of magneto-optical layer was modified to be suitable for multiple-tone expression by substituting Al in Bi:YIG film. At a driving current to 28 mA in an electrode of the fabricated MO-SLM, changes in brightness of pixels were observed using a polarization microscope.