• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1760-1767
• /
• 2010

FAT compounds photocatalysts were prepared with $TiOSO_4{\cdot}xH_2O$ (TOS) by a sol-gel method. The samples were characterized by scanning electron microscopy (SEM), BET specific surface area, X-ray diffraction analysis (XRD) and energy dispersive X-ray spectroscopy (EDX). The SEM results showed that ferric compounds and titanium dioxide were fixed onto the AC surfaces. The XRD results showed that Fe-AC/$TiO_2$ composites mostly contained anatase phase. EDX showed the presence of C, O, and Ti with Fe peaks in all samples. The photocatalytic activities were evaluated by the photocatalytic oxidation of methylene blue (MB) solution, via compare photodegradation of MB solution under visible light and UV light separately. Fe-AC/$TiO_2$ composites had an excellent photocatalytic under strong visible light irradiation. A small amount of Fe ions in AC/$TiO_2$ particles could obviously enhance their photocatalytic activity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.130.1-130.1
• /
• 2013

We made attempts to improve photocatalytic activity of $TiO_2$ nanoparticles under visible light exposure by combining two additional treatments. N-doping of $TiO_2$ by ammonia gas treatment at $600^{\circ}C$ increased absorbance of visible light. By coating thin film of polydimethylsiloxane (PDMS), and subsequent vacuum-annealing at $800^{\circ}C$, $TiO_2$, became more hydrophilic, thereby enhancing photocatalytic activity of $TiO_2$. Four types of $TiO_2$ samples were prepared, bare-$TiO_2$, hydrophilic-modified $TiO_2$ ($h-PDMS/TiO_2$), N-doped $TiO_2$ ($N/TiO_2$) and hydrophilic-modified and N-doped $TiO_2$ ($h-PDMS/N/TiO_2$). Adsorption capability was evaluated under dark condition and photocatalytic activity of $TiO_2$ was evaluated by photodegradation of MB under blue LED (400 nm< ${\lambda}$) irradiation. N-doping on $TiO_2$ was characterized using XPS and hydrophilic modification of $TiO_2$ surface was analyzed by FT-IR spectrometer. It was found that N-doping and hydrophilic modification both had positive effect on enhancing adsorption capability and photocatalytic activity of $TiO_2$ at the same time. Particularly, N-doping enhanced visible light absorption of $TiO_2$, whereas hydrophilic surface modification increased MB adsorption capacity. By combining these two strategies, photocatalytic acitivity under visible light irradiation became the sum of individual effects of N-doping and hydrophilic modification.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.737-742
• /
• 2015

This paper is designed to find out where power reaches the highest point as the load of solar cells varies. In addition, the current and power were measured when irradiation changes, and the correlation between current and power was investigated. On top of that, experiments were conducted with the light volume kept constant and with the incoming light angle changing in order to figure out the incoming light angle that produces the most power and to conduct analyses. It was ascertained that if the load increases, the current decreases and the voltage increases. Since the power of 0.9828[W] was the highest when measurements were done, it can be said that when a load of 30[%] is applied to the solar cells, they are the most efficient.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1169-1174
• /
• 2013

The objective of this work was to increase the efficiency of ultraviolet-light emitting diodes at 375 nm for sterilization. Since $TiO_2$ had antibacterial properties, which were attributed to the appearance of hydroxyl radicals and superoxide radical anions on the surface species under ultra violet radiation at about 387 nm, photo-reactive layers such as Ag-doped $TiO_2$ were coated on aluminum substrates by electrostatic spraying. Crystallinity and surface morphology of the coating layer were examined by X-ray diffraction ${\theta}-2{\theta}$ scan and field emission-scanning electron microscope, respectively. In an antibacterial test, we observed above 99% reduction of Escherichia coli populations on 3 or 5 mol% Ag-doped $TiO_2$ layers after irradiation for 2 hrs at 375 nm, while very low inactivation on bare aluminum substrates occurred after irradiation as the same condition.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.4
• /
• pp.29-35
• /
• 2003

We studied the water splitting into $H_2$ and $O_2$ using two different semiconductor photo catalysts and redox mediator, mimicking the Z-scheme mechanism of the photosynthesis, $H_2$ evolution took place on a Pt-$SrTiO_2$ (Cr-Ta doped) photocatalyst using $I^-$ electron donor under the visible light irradiation. The Pt-$WO_3$ photocatalyst showed an excellent activity of the $O_2$ evolution using $IO_3^-$ electron acceptor under visible light. $H_2$ and $O_2$ gases evolved in the stoichiometric ratio($H_2/O_2$=2) under visible light using a mixture of the Pt-$WO_3$ and Pt-$SrTiO_3$ (Cr-Ta doped) suspended in NaI aqueous solution. We proposed a two-step photo-excitation mechanism using redox mediator under the visible irradiation.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1291-1292
• /
• 2007

Recently, there were many researches for efficiency improvement of DSC. Among of these works, research of surface treatment is still a prerequisite for electron diffusion, light-harvesting and surface state of DSC.[1] Using of the surface treatment, it can be raise up porosity of $TiO_2$ nano-crystalline structure on photo-electrode. There are chemical, physical, electrical and optical methods which raise up its porosity. In this paper, we have designed and manufactured MOPA-type ultrasonic circuit (100W, frequency and duty variable). Manufactured ultrasonic circuit to use to force cavity density and power into $TiO_2$ paste. Then, we have optimized forcing time, frequency and duty of ultrasonic irradiation for surface treatment of photo-electrode of DSC. In I-V characteristic test of DSC, ultrasonic and thermal treated DSC shows 19% improved its efficiency against monolithic DSC. And it shows stability of light-harvesting from drastically change of light irradiation test.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.5
• /
• pp.581-589
• /
• 1997

This study was undertaken to examine the effects of ultraviolet light (UVL) and rebamipide on the cutaneous blood flow and tissue survival on rabbit skin flap. In a random bipedicle flap, Laser Doppler Flowmetry (LDF) was employed to measure the blood flow of flap (BFF). Wound Margin Strength (WMS) measured by force transducer and Light microscophy were used for evaluation of tissue viability. Single exposure to UVL increased the BFF gradually for more than 15 hours, and decreased the vasoconstrictor effect of intravenous phenylephrine. The UVL-induced increase in BFF regressed after 18 hours of irradiation, and this regression was tended to be enhanced by intradermal injection of L-NAME, a nitric oxide synthase (NOS) inhibitor, but the regression was significantly reversed by acetylcholine, an endothelial constitutive NOS (cNOS) activator and L-arginine, an NO precusor. Rebamipide, a novel antiulcer agent known to scavenge the hydroxyl radical, abruptly reversed the spontaneous regression of the UVL- induced increase in BFF by the same manner as L-arginine. In ischemic skin flap, rebamipide increased the BFF abruptly by the same manner as sodium nitroprusside (SNP), an NO doner, while N-acetylcystein (NAC), a free radical scavenger, gradually increase the BFF. The rebamipide-induced increase in BFF was sustained at the level of the SNP-induced increase in BFF during the late period of experiment. Rebamipide increased the WMS of skin flaps and prevented the tissue necrosis in comparison with L-NAME. Based on these results, it is concluded that in rabbit skin, UVL irradiation increases the BFF by NO release, and rebamipide exerts a protective effect on the viability of ischemic skin flaps by either or both the increase in BFF by NO release and free radical scavenger effect.

• The korean journal of orthodontics
• /
• v.46 no.3
• /
• pp.146-154
• /
• 2016

Objective: Different methods have been utilized to prevent enamel demineralization and other complications during orthodontic treatment. However, none of these methods can offer long-lasting and effective prevention of orthodontic complications or interventions after complications occur. Considering the photocatalytic effect of $TiO_2$ on organic compounds, we hoped to synthesize a novel bracket with a $TiO_2$ thin film to develop a photocatalytic antimicrobial effect. Methods: The sol-gel dip coating method was used to prepare $TiO_2$ thin films on ceramic bracket surfaces. Twenty groups of samples were composed according to the experimental parameters. Crystalline structure and surface morphology were characterized by X-ray diffraction and scanning electron microscopy, respectively; film thickness was examined with a surface ellipsometer. The photocatalytic properties under ultraviolet (UV) light irradiation were analyzed by evaluating the degradation ratio of methylene blue (MB) at a certain time. Antibacterial activities of selected thin films were also tested against Lactobacillus acidophilus and Candida albicans. Results: Films with 5 coating layers annealed at $700^{\circ}C$ showed the greatest photocatalytic activity in terms of MB decomposition under UV light irradiation. $TiO_2$ thin films with 5 coating layers annealed at $700^{\circ}C$ exhibited the greatest antimicrobial activity under UV-A light irradiation. Conclusions: These results provide promising guidance in prevention of demineralization by increasing antimicrobial activities of film coated brackets.

• Journal of Environmental Science International
• /
• v.27 no.7
• /
• pp.611-620
• /
• 2018

In this study, a metal-organic framework (MOF) material $NH_2$-MIL-101(Fe) was synthesized using the solvothermal method, and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), UV-visible spectrophotometry, field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and surface area measurements. The XRD pattern of the synthesized $NH_2$-MIL-101(Fe) was similar to the previously reported patterns of MIL-101 type materials, which indicated the successful synthesis of $NH_2$-MIL-101(Fe). The FT-IR spectrum showed the molecular structure and functional groups of the synthesized $NH_2$-MIL-101(Fe). The UV-visible absorbance spectrum indicated that the synthesized material could be activated as a photocatalyst under visible light irradiation. FE-SEM and TEM images showed the formation of hexagonal microspindle structures in the synthesized $NH_2$-MIL-101(Fe). Furthermore, the EDS spectrum indicated that the synthesized material consisted of Fe, N, O, and C elements. The synthesized $NH_2$-MIL-101(Fe) was then employed as an adsorbent and photocatalyst for the removal of Indigo carmine and Rhodamine B from aqueous solutions. The initial 30 min of adsorption for Indigo carmine and Rhodamine B without light irradiation achieved removal efficiencies of 83.6% and 70.7%, respectively. The removal efficiencies thereafter gradually increased with visible light irradiation for 180 min, and the overall removal efficiencies for Indigo carmine and Rhodamine B were 94.2% and 83.5%, respectively. These results indicate that the synthesized MOF material can be effectively applied as an adsorbent and photocatalyst for the removal of dyes.

• Journal of the Korean Vacuum Society
• /
• v.22 no.4
• /
• pp.193-197
• /
• 2013

In order to investigate the photo-electric property in $VO_2$ film grown by a sol-gel method, the currents generated by the light irradiation and nonirradiation were measured as functions of the bias voltage and the temperature. From the result, the generated current in the film changed with the light irradiation and nonirradiation, and it gradually increased with the bias voltage. In particular, the maximum current was generated at $50^{\circ}C$ under the light irradiation; the temperature is lower comparing the MIT (metal-insulator transition) temperature in $VO_2$. This result indicates that $VO_2$ shows the photo-voltaic effect, and so that, it is expected that the $VO_2$ film is applied for a photo-voltaic device.