• 제목/요약/키워드: Light harvesting

검색결과 234건 처리시간 0.026초

각종재배조건이 고구마 수량 및 전분 함량에 미치는 영향 (Effects of the Various Cultural Treatments on Tuber Yield and Starch Content in Sweet Potato)

  • 조재영;박근용;반채돈
    • 한국작물학회지
    • /
    • 제8권1호
    • /
    • pp.83-89
    • /
    • 1970
  • 각종 재배조건 및 저장기간이 고구마 전분함량에 미치는 영향을 구명코저 신미 품종을 공시하여 삽식기별 수수기별 시비량별 토성별 저장기간별로 구분 시험을 실시하였든바 요약하면 다음과 같다. 1. 5월 15일 삽식에 비하여 만식일수록 괴근수량 및 전분함랴은 감소되었고 특히 6월 5일 이후의 삽식에서 급격히 감소되었으며 괴근수량의 감소정도에 비하여 전분함량의 감소정도는 더욱 심하였다. 2. 10월 5일 적기수확에 비하여 조기수확일수록 괴근수량 및 전분함량은 감소 경향이였고 8월 25일 이전 조기수확은 괴근수량 37~45% 전분함량 5~7%의 감소를 보였다. 3. 시비량에 따라서 전분함량은 차이가 많았으며 대체로 3요소를 균형시비하는 경우 전분함량이 높은 경향이었고 가리질비료를 다용하거나 인산질비료를 시용하지 않은 경우 낮은 경향이였다. 한편 괴근수량에는 $K_20$O>$P_20_5$>N의 순으로 효과가 높았다. 4. 토성에 있어서는 모래나 자갈이 많이 함유되어 있는 토양에서부터 경직토로 갈수록 전분함량은 낮았으나 10a당 전분수량은 조사토 및 식양토에서 높았다. 5. 저장기간중 전분함량은 수량직후에 가장 높고 저장일수가 경과함에 따라 감소하였으나 수확후 10일에서 급격히 감소되었고 그 후의 감소는 근소하였다.

  • PDF

DC 유형의 에너지 하베스팅 자원을 활용한 저전력의 MPPT 인터페이스 (A Low-Power MPPT Interface for DC-Type Energy Harvesting Sources)

  • 조우빈;이진희;유종근
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 추계학술대회
    • /
    • pp.35-38
    • /
    • 2018
  • 본 논문에서는 DC 유형의 에너지 하베스팅을 위한 저전력 MPPT 인터페이스 회로를 설계하였다. 제안된 회로는 크게 MPPT controller, bias generator, voltage detector로 구성된다. MPPT controller는 schmitt trigger로 구성된 MPG(MPPT Pulse Generator)와 에너지 유형(빛, 열)에 따라 동작하는 logic gate와 sample/hold 회로로 구성된다. Bias generator는 beta multiplier 구조를 적용하여 설계되었으며, voltage detector는 bulk-driven comparator와 2단 buffer를 이용하여 설계되었다. 제안된 회로는 $0.35{\mu}m$ CMOS 공정으로 설계하였다. 모의실험 결과 설계된 회로는 3V 이내의 입력전압에서 100nA보다 작은 전류를 소모하며, 최대 전력효율은 99.7%이다. 설계된 회로의 칩 면적은 $1151{\mu}m{\times}940{\mu}m$이다.

  • PDF

진동에너지 하베스팅을 위한 전파 정류기 성능 비교 (Performance Comparison of Full-Wave Rectifiers for Vibration-Energy Harvesting)

  • 윤은정;양민재;유종근
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2014년도 추계학술대회
    • /
    • pp.278-281
    • /
    • 2014
  • 본 논문에서는 진동에너지 하베스팅을 위한 세 가지 종류의 전파 정류기를 비교 분석 하였다. 첫번째 정류기는 두 개의 능동 다이오드(active diode)와 두 개의 MOSFET로 구성된 전파 정류기로 능동 다이오드의 비교기는 정류기의 출력으로부터 전력을 공급받는다. 두 번째는 네 개의 MOSFET로 구성된 정류기와 하나의 능동 다이오드로 구성된 2단 정류기이며, 마찬가지로 비교기는 정류기의 출력으로부터 전력을 공급받는다. 세 번째는 두 번째 정류기와 동일한 구조이나 비교기의 전력을 정류기의 입력으로부터 공급받는 input-powered 정류기이다. 이 정류기들을 0.35um CMOS 공정으로 설계하고 모의실험을 통해 성능을 비교, 분석하였다. 부하가 큰 경우에는 첫 번째 정류기를 이용하는 것이, 부하가 작은 경우에는 두 번째 정류기를 이용하는 것이 효율적인 측면에서 유리하다. 또한 효율보다는 진동에너지의 유무에 따른 전력 소모가 중요하다면 세 번째 정류기가 유리하다.

  • PDF

압전형 에너지 수확장치를 위한 통합 해석환경의 적용 및 검증 (Application and Verification of Fully-Integrated Design Environment for Piezoelectric Energy Harvester)

  • ;;한승오
    • 센서학회지
    • /
    • 제22권5호
    • /
    • pp.364-368
    • /
    • 2013
  • Vibrational energy harvester based on piezoelectricity has been expected to be the dominant energy harvesting technology due to the advantages of high conversion efficiency, light weight and small size, night operation, etc. Its commercialization is just around the corner but the integration with power management electronics should be solved in advance. In this paper, therefore, fully-integrated design environment for piezoelectric energy harvesting systems is presented to assist co-design with the power management electronics. The proposed design environment is capable of analyzing the energy harvester including the package-induced damping effects and simulating the device and its power management electronics simultaneously. When the developed design environment was applied to the fabricated device, the simulated resonant frequency matched well with the experimental result with a difference of 2.97% only. Also, the complex transient response was completed in short simulation time of 3,001 seconds including the displacement distribution over the device geometry. Furthermore, a full-bridge power management circuit was modeled and simulated with the energy harvester simultaneously. Therefore the proposed, fully-integrated design environment is accurate and fast enough for the contribution on successful commercialization of piezoelectric energy harvester.

Leakage Current Energy Harvesting Application in a Photovoltaic (PV) Panel Transformerless Inverter System

  • Khan, Md. Noman Habib;Khan, Sheroz
    • Transactions on Electrical and Electronic Materials
    • /
    • 제18권4호
    • /
    • pp.190-194
    • /
    • 2017
  • Present-day solar panels incorporate inverters as their core components. Switching devices driven by specialized power controllers are operated in a transformerless inverter topology. However, some challenges associated with this configuration include the absence of isolation, causing leakage currents to flow through various components toward ground. This inevitably causes power losses, often being also the primary reason for the power inverters' analog equipment failure. In this paper, various aspects of the leakage currents are studied using different circuit analysis methods. The primary objective is to convert the leakage current energy into a usable DC voltage source. The research is focused on harvesting the leakage currents for producing circa 1.1 V, derived from recently developed rectifier circuits, and driving a $200{\Omega}$ load with a power in the milliwatt range. Even though the output voltage level is low, the harvested power could be used for charging small batteries or capacitors, even driving light loads.

미세기포를 이용한 Spirulina platensis의 입자 부상분리 특성 및 수거효율 (Particle Separation Characteristics and Harvesting Efficiency of Spirulina platensis Using Micro-bubble)

  • 곽규동;김미숙;곽동희
    • 상하수도학회지
    • /
    • 제27권5호
    • /
    • pp.621-629
    • /
    • 2013
  • Since algae had been issued an environmental problem, water blooms, deepened due to increase of retention water basin in Korea as well as a biomass resource for producing biofuel, this study conducted a series of experiments for Spirulina platensis using the flotation process with micro-bubble. To elevate utilization of collected-algae, this study focused on omitting or minimizing coagulant's doses as changing a cultivation period and condition affected on physical property change of algae. Two coagulants, PAC and Chitosan, were used to test the collecting rate of algae and the result found no difference between two rates. For flotation experiments without adding the coagulant, dried algae weight (passing 14 days after cultivation for 20 days) detected high separation efficiency 98.2 % and it (passing 7 days after long-term cultivation for 28 days) presented good separation efficiency 91.9 %. Chlorophyll's separation efficiency showed a similar tendency with the case of the dried algae weight. In endogeny conditions, a light source and a carbon source were not considerably affected on the flotation separation efficiency. Thus, this study confirms that algae biomass may be collected without the coagulant during the endogeny condition period after enough cultivation time, 3 weeks.

Micropower energy harvesting using high-efficiency indoor organic photovoltaics for self-powered sensor systems

  • Biswas, Swarup;Lee, Yongju;Kim, Hyeok
    • 센서학회지
    • /
    • 제30권6호
    • /
    • pp.364-368
    • /
    • 2021
  • We developed a highly efficient organic photovoltaic (OPV) cell with a poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b']dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl)]:[6,6]-phenyl-C71-butyric acid methyl ester active layer for harvesting lower-intensity indoor light energy to power various self-powered sensor systems that require power in the microwatt range. In order to achieve higher power conversion efficiency (PCE), we first optimized the thickness of the active layer of the OPV cell through optical simulations. Next, we fabricated an OPV cell with optimized active layer thickness. The device exhibited a PCE of 12.23%, open circuit voltage of 0.66 V, short-circuit current density of 97.7 ㎂/cm2, and fill factor of 60.53%. Furthermore, the device showed a maximum power density of 45 ㎼/cm2, which is suitable for powering a low-power (microwatt range) sensor system.

Variation in the Size of Light Harvesting 1 of Purple Bacteria

  • Akiyama, Machiko;Nagashima, Kenji V.P.;Inoue, Ryouji;Wakayama, Tatsuki;Kise, Hideo;Hara, Masayuki;Kobayashi, Masami
    • Journal of Photoscience
    • /
    • 제9권2호
    • /
    • pp.350-352
    • /
    • 2002
  • We examined the bacteriochlorophyill/bacteriopheophytin ratios in several species of purple bacteria containing only LHI. The pigment ratios depended greatly on species. Further, Rhodospirillum rubrum showed wide variation when grown under different light intensity, and Rhodobium marinum showed significant variation from culture to culture even under the same light conditions. The protein ratios of a/RC and $\beta$/RC estimated by SDS-PAGE of chromatophores of Rsp. rubrum and Rbi. marinum exhibited the ratio of $\beta$/$\alpha$ > 1. These findings gave us the novel idea that there are two types of LHl; one is a C-shaped open antenna composed by $\alpha$$\beta$ units surrounding a RC, and another is a small closed ring antenna composed by $\alpha$$\beta$ units located peripherally in a variable ratio to the core complex like LH2.

  • PDF

SOME ASPECTS OF THE CANADIAN CULTURE OF GINSENG (PANAX QUINQUEFOLIUS L.), PARTICULARLY THE GROWING ENVIRONMENT

  • Proctor J.T.A
    • 고려인삼학회:학술대회논문집
    • /
    • 고려인삼학회 1980년도 학술대회지
    • /
    • pp.39-47
    • /
    • 1980
  • The harvesting and export of Canadian ginseng from the cool, shady hardwood forests of southern Canada can be traced to 1796. Because of its high dollar value and diminishing woodland supplies it was decided in 1896 that it should be cultivated under wood lath screens. Present day economics dictate changes in production techniques to allow for a decreasing supply of expensive labour. Traditional wooden lath screens have a surface area of wood of 70 per cent and permit light penetration of only about 18 per cent. Experimental woven black polypropylene shade has an estimated surface area of 72 per cent and permits light pentration of about 28 per cent. While differences in air and leaf temperatures under the two shade structures can be measured it is doubtful if these are great enough to cause differences in plant growth under the two structures. Shade grown ginseng had a low fresh and dry weight and total chlorophyll content (ratio of a to b was 3 to 1) comparable to other shade species. There was no differences in fresh and dry weight and chlorophyll content of leaves from plants grown under the two shade structures. Maximum net photosynthesis of leaves was 0.175 g $CO_2\;m^{-2}\;hr^{-1}$ and light saturation level was about $200{\mu}E\;m^{-2}\;s^{-1},$ or about 10 per cent of full sunlight.

  • PDF

주석-납 기반 페로브스카이트 고농도 전구체 용액을 이용한 광전류 향상 연구 (Study for Improved Photocurrent via High Concentrated Tin-lead Perovskite Precursor Solution)

  • 홍효진;이승민;임정민;노준홍
    • Current Photovoltaic Research
    • /
    • 제11권3호
    • /
    • pp.96-102
    • /
    • 2023
  • Sn-Pb narrow-bandgap perovskite solar cells, which is a light-harvesting layer thicker than 1.3 micrometers, is needed to enhance the low photocurrent. The fabrication of such a thick film through solution processing is a key challenge. Here, we studied and characterized the film by using a precursor solution of increased concentration, comparing it with the universally used 1-micrometer Sn-Pb perovskite film. The increase in molar concentration clearly induced thickness enhancement, but we observed that it also created numerous voids at the interface with bottom charge transporting layer. We hypothesized that these voids might hinder the increase in photocurrent associated with thickness enhancement. By introducing methylammonium chloride (MACl), we successfully fabricated Sn-Pb perovskite film with a thickness of 1.3 micrometer and no voids. Void-controlled Sn-Pb perovskite solar cells not only demonstrated superior short-circuit current density compared to those with voids but also operated smoothly under light exposure.