• Bulletin of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.33-40
• /
• 2007

We have designed and synthesized three Zn(II)-porphyrin derivatives, such as Zn(II) porphyrin ([G-0]Zn-P1) and aryl ether-typed dendron substituted Zn(II)-porphyrin derivatives ([G-1]Zn-P1 and [G-1]Zn-P-CN1). Their chemical structures were characterized by 1H-NMR, FT-IR, UV-vis absorption, EI-mass, and MALDI-TOF mass spectroscopies. Their electrochemical properties were studied by cyclic voltammetry measurement. These Zn(II)-porphyrin derivatives have been used to fabricate dye-sensitized solar cells (DSSCs) based on solid polymeric electrolytes as dye sensitizers and their device performances were evaluated by comparing with that of a standard Ru(II) complex dye. [G-1]Zn-P-CN1 showed the enhanced power conversion efficiency than those of other porphyrin derivatives, as expected. Short-circuit photocurrent density (Jsc), open-circuit voltage (Voc), fill factor (FF), and power conversion efficiency (η) of solid-typed DSSC for [G-1]Zn-P-CN1 were evaluated to be Jsc = 11.67 mA/cm2, Voc = 0.51 V, FF = 0.46, and η = 2.76%, respectively.

• Applied Biological Chemistry
• /
• v.23 no.1
• /
• pp.73-83
• /
• 1980

The light harvesting pigment proteins of dinoflagellates exhibit essentially 100% efficient energy transfer from carotenoid (peridinin) to chlorophyll a within the antenna pigment complexes. The high efficiency of solar energy harvesing (particularly blue light) for photosynthesis in dinoflagellates is attributable to the unique molecular topography of peridinin and chlorophyll e within the protein crevice. The mechanisms of energy transfer from carotenoids to chlorophyll in higher plants have also been discussed in comparison with the dinoflagellate antenna pigment complexes. As an example of solar energy harvesting, particularly red light, for photosynthesis in algae, the molecular topography and energy transfer in the photosynthetic accessory pigment protein, Chroomonas phycocyanin, have also been discussed.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.189-192
• /
• 2000

The objective of this study was to investigate the effect of high content of light-absorbing pigments on overall photosynthetic efficiency in high density microalgal cultures. The light harvesting complex II (LHC II) regulating gene of Rhodobacter sphaeroides, photosynthetic purple bacterium, was removed to construct a mutant strain that had less pigment content. The mutant and wild type strains were cultured under various light intensity by adjusting the distance from the light source. The productivity of the mutant strain was higher at high light intensity (over 118 ${\mu}E/m^2/s$) compared with one of the wild type , and was lower at low light intensity (34 ${\mu}E/m^2/s$). Especially, the concentration of LHC II mutant strain was 56% higher at 118 ${\mu}E/m^2/s$. The reduction of per cell pigment contents in the mutant strain lessened the degree of the mutual shading and thus enhanced the overall photosynthetic efficiency.

• Rapid Communication in Photoscience
• /
• v.2 no.1
• /
• pp.18-23
• /
• 2013

The photosystem II (PSII) light harvesting complex (LHC) consists of a variety of pigment protein complexes which are involved in structural organization and regulation of photosynthetic unit. These LHC proteins encoded by a group of Lhcb genes are essential for the structural integrity of PSII supercomplex, the channeling the excitation energy to the reaction center of PSII and its redistribution to photosystem I by state transitions. Numerous studies with the help of recent technological advancements have enabled a significant progress in our understanding on the structure of PSII-LHCII supercomplexes and their mobilization under various light conditions. Here, we present a mini-review on the latest concepts and models depicting the structure of PSII-LHCII supercomplexes and the role of Lhcb proteins in their supra-molecular organization. Also we will review on the current understandings and remaining problems involved in the mobilization of the supercomplexes during state transitions and during high light illumination for controlling light energy distribution between the two photosystems.

• Journal of Biosystems Engineering
• /
• v.36 no.3
• /
• pp.223-230
• /
• 2011

Physiological signals such as body temperature, heart rate, blood pressure and heart rate variability and biomechanical workload for stress analysis were investigated during the cherry tomato harvesting work in a greenhouse. The skin temperatures raised $0.05^{\circ}C$/min, $0.03^{\circ}C$/ min, and $0.08^{\circ}C$/min in standing, stooping and squatting postures, respectively. Breath rate significantly increased from 18 to 28 breaths/min during the cherry tomato harvesting work. As the heart rate during the work ranged from about 72 to 110 beats/min (bpm), the cherry tomato harvesting work appeared to be a light intensity task of less than 110 bpm. The worker's average energy consumption rate in three positions during 43 min working time was 65.74 kcal (91 kcal/h in 70 kg). This was a light intensity of work, compared to 75 kcal/h in 70 kg of basic metabolic energy consumption rate of a worker with 70 kg weight; The maximum shear force on the disk (L5/ S1) due to static workload in the cherry tomato harvesting work was 446 N in the stooping posture, 321 N in the squatting posture and 287 N in the standing posture. Acute stress index expressed with the heart rate variability, increased parasympathetic activation up to about 70 while workers were doing most agricultural work in this study. This study provided a system to measure quantitatively workers' physiological change, kinematics and kinetic factors without any restrictions of space in the greenhouse works.

• Journal of Ginseng Research
• /
• v.13 no.2
• /
• pp.158-164
• /
• 1989

In order to determine the relationships between the lea(-burning disease and the light harvesting chlorophyll-protein (LHCP) complex in Panax ginseng C. A. Meyer, we investigated the chlorophyll-protein (CP) complex of the thylakoid membrane and its characteristics. In P. ginseng four Cp-complex bands determined by non-denaturing SDS-PAGE were identified CP I'(containing reaction center of photosystem I and LHCP I antennae), CP I (reaction center of photosystem I) LHCP II** (oligoform of LHCP II), and LHCP II (photosystem II antennae, CP 26 and CP 29) by Bassis and Dunahay's procedures. Under our experimental condition, the CP I band was only observed in P. ginseng and the band intensity of LHCP II** in P ginseng was higher than in spinach and soybean. There were differences in the absorption and fluorescence spectra and chlorophyll a/b ratio of the CP-complex bands between P. ginseng and other Plants. The Polypeptidr content of P. ginseng thylakoid was lower than in spinach and soybean thylakoid, and the Polypeptide profiles of P. ginseng was low band intensity, especially about 29-35 kD, 55 kD, and 60 kD, compared to spinach and soybean. The inhibitory effects of 2,5-dimethylfuran, specific singlet oxygen ($^1O_2$) quencher, showed that singlet oxygen destroyed 60% of chl.a, 90% of chl.b and 70% of carotenoid in bleaching P. ginseng with leaf-burning disease.

• Journal of Powder Materials
• /
• v.16 no.5
• /
• pp.305-309
• /
• 2009

The effect of light scattering layers (400 nm, TiO$_2$ particle) of 4 $\mu$m thickness on the dye-sensitized solar cell has been investigated with a 12 $\mu$m thickness of photo-anode (20 nm, TiO$_2$ particle). Two different structures of scattering layers (separated and back) were applied to investigate the light transmitting behaviors and solar cell properties. The light transmittance and cell efficiency significantly improved with inserting scattering layers. The back scattering layer structure had more effective transmitting behavior, but separated scattering layer (center: 2 $\mu$m, back: 2 $\mu$m) structure (9.83% of efficiency) showing higher efficiency (0.6%), short circuit current density (0.26 mA/cm$^2$) and fill factor (0.02). The inserting separating two scattering layers improved the light harvesting, and relatively thin back scattering layer (2 $\mu$m of thickness) minimized interruption of ion diffusion in liquid electrolyte.

• Proceedings of the Korean Society of Potoscience Conference
• /
• 2005.06a
• /
• pp.74-75
• /
• 2005

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.25-38
• /
• 2021

The aim of this study is to protect workers and pedestrians from accidents at night or bad weather by attaching optical fiber to existing safety clothing that is made only with fluorescent fabrics and retroreflective materials. A safety vest was designed and manufactured by applying optical fiber, and energy-harvesting technology was developed. The safety vest was designed to emit light using the automatic flashing of optical fibers attached to the film, and an energy harvester was manufactured and attached to drive the light emission of the optical fiber more continuously. As a result, first, the vest wearer' body was recognized from a distance through the optical fiber and retroreflection, which helped prevent accidents. Thus, this concept helps in saving lives by preventing accidents during night-time work on the roadside or activities of rescue crew and sports activities, or by quickly finding the point of an accident with a signal that changes the optical fiber light emission. Second, to use the wasted energy, a piezoelectric-element power generation system was developed and the piezoelectric-harvesting device was mounted. Potentially, energy was efficiently produced by activating the effective charging amount of the battery part and charging it auxiliary. In the existing safety vest, detecting the person wearing the vest is almost impossible in the absence of ambient light. However, in this study, the wearer could be found within 100 m by the light emission from the safety vest even with no ambient light. Therefore, in this study, we will help in preventing and reducing accidents by developing smart safety clothing using optical fiber and energy harvester attached to save lives.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.88.2-88.2
• /
• 2010

Dye-sensitized solar cells (DSSCs) have attracted considerable attention on account of their high solar energy-to-conversion efficiencies and low cost processes compared to conventional p-n junction solar cells. The mechanism of DSSC is based on the injection of electrons from the photo excited dyes into the conduction band of the semiconductor electrode. The oxidized dye is reduced by the hole injection into either the hole conductor or the electrolyte. Thus, the light harvesting effect of dye plays an important role in capturing the photons and generating the electron/hole pair, as well as transferring them to the interface of the semiconductor and the electrolyte, respectively. We used the organic fluorescence materials which can absorb short wavelength light and emit longer wavelength region where dye sensitize effectively. In this work, the DSSCs were fabricated with fluorescence materials added $TiO_2$ photo-electrode which were sensitized with metal-free organic dyes. The photovoltaic performances of fluorescence aided DSSCs were compared, and the recombination dark current curves and the incident photon-to-current (IPCE) efficiencies were measured in order to characterize the effects of the additional light harvesting effect in DSSC. Electro-optical measurements were also used to optimize the fluorescence material contents on TiO2 photo-electrode surface for higher conversion efficiency (${\eta}$), fill factor (FF), open-circuit voltage (VOC) and short-circuit current (ISC). The enhanced light harvesting effect by the judicious choice/design of the fluorescence materials and sensitizing dyes permits the enhancement of photovoltaic performance of DSSC.